Location: Leeds, ND – 1 mile west of Leeds, ND on the south side of Hwy 2

 

COME PREPARED TO BUY AT TWO RINGS

 

AUCTIONEER’S NOTE: Each year, this has been a huge auction that always features an outstanding line of well-kept equipment. If you are looking for a specific piece, be sure to look this entire list over carefully, as equipment is categorized by owner rather than by type of equipment. Additional note: This is a partial list. New consignments are arriving daily.

 

INTERNET BIDDING: This auction will feature live internet bidding. For live bidding the day of the auction, go to www.proxibid.com. Pre-registration is required prior to auction day. Internet bidding starts at 10:30 am.

 

Visit our websites at www.midwestauctions.com/dakota or www.globalauctionguide.com or www.dakotaauctioneers.com

Dakota Auctioneers, Larry Swenson, (701) 968-4224 Office or (701)-303-0379 Cell

Call to reserve your spot! Many items already consigned.We will have a large assortment of Farm Equipment, Haying and Livestock, much, much more. Consistently North Central North Dakota's Largest Farm Equipment Auction. Call to Consign 1-800-698-7698

10. Des McIntyre – Leeds ND – 701-230-1026

– 42’ JD 1850 no till drill

– 30’ Tandem disk

– 1979 Chevy single axle grain truck

– 1974 Ford single axle 2 ton grain truck

– 40’ WilRich field cultivator, good harrows

– 30’ IHC Chisel, good harrows

– 57’ Herman harrow

– Smaller grain auger

– 25’ Massey Ferguson pull type swather, nice shape, been shedded

– Creep feeder, excellent condition

– Bush Hog mower

– Many other farm items, not listed

 

11. Vince Weixel – Churchs Ferry, ND – 701-381-2510

– 4010 JD w/ 148 loader & jobber 3 pt., diesel, 8 sp. syncro, 50% plus tires, good

– 7’ snow blower

– Allied 3 pt. blower, 2 stage

– JD 8’ box scraper, 3 pt.

– 2003 F-150 XLT 4WD pickup, 4 door, 5.4 gas, automatic, 160,000 miles, dressed up sharp pickup

– 2006 Trailblazer, extended 3rd row seat, 4WD, 4.3 V6, automatic, 111,000 miles

– IHC 101 pull type rotary mower

– 10’ chisel plow

– 9” post hole digger, 3 pt., PTO, like new

 

12. Bob Johnson – Rugby, ND – 701-771-2501

– 1985 GT Model 580 Tox-O-wik PTO batch dryer, 450 bushels, has snorkel (nice shape), grain cleaned out every year so very little rust, works good on corn, good belts, has transport wheels, hitch, etc., ready to use

 

13. Tim Ostrem – Rugby, ND – 701-208-0188

– 1974 IH tandem truck, 466 Detroit, 13 sp. transmission, new roll tarp, good strong truck

– 24’ JD 220 disk

– 45’ x 7” Sakundiak auger

– 60’ MarvFlex pickup sprayer mounted on a 2 pt. frame

 

14. Dale Long – Devils Lake, ND – 701-381-2061

– 42’ JD Z225 Zero turn lawn mower w/ bagger, 500 hrs. on Briggs engine

 

15. Trent Johnson – Rugby, ND – 701-771-2500

– (2) 1000 gal. tanks tied together, quick couplers, 2 new tires on each, updated hoses, etc.

 

16. Greg Graber – Wolford ND – 701-583-2271

– JD 843 corn head, oil drive, SN 625997, shedded

– 30’ JD model 930 rigid head w/ bat reel, SN 656534, stored inside

– 36’ IHC 4700 field cultivator w/ harrows

– IHC 8220 25’ pull type swather w/ end cutter & finger reel, stored inside

– Premier model 1900 25’ pull type swather w/ finger reel, stored inside, not used in the last 7 yrs.

 

17. Chad Duchscher – Rugby, ND – 701-208-0992

– 2012 22’x8’ Deck over car trailer, (2) 14,000 lb. axles, like brand new condition, bumper hitch, slide in ramps

– 6’ S tine tree cultivator w/ rolling baskets

– International Model 244 utility tractor w/ 3 pt. & PTO, 1300 hrs., very nice shape

– Portable power station w/ Honda motor, 540 PTO, dual hyd., like new

 

18. Bill Galow – Bisbee ND – 701-656-3626

– JD 220 Flex head w/ Crary air finger reel, has transport trailer

 

19. Lanny Johnson – Esmond ND – 701-583-2104

– Massey Ferguson Model 1560 round baler, hyd. tie, recent new sprockets & chains ($1000), simple to use, good baler

 

20. Marvin Narum – Michigan ND – 701-259-2452

– 1070 Case, factory 3 pt., power shift, 2 hyd., white cab, good A/C & heat, engine majored at 7,000 hrs., now has 9000 hrs., 16.9 38’s (50%), never pulled hard (haying, etc.)

– IHC M w/ 350 Dual loader, power steering, belly pump, very nice shape

 

21. Tim Krueger – Egeland ND – 701-230-1821

– 1957 Dodge truck w/ tag axle, V8, 5 sp. transmission, 2 sp. axle, 16½’ box, steel floor, twin cylinder hoist, 3 pc. end gate, roll tarp, good tires, stored inside

– 2 wheel trailer w/ steel 100 bu. grain box, truck hoist, tarp

– Tyler 3 ton fertilizer spreader, stainless steel box, twin fan, tandem axles

– (7) trailer/cultivator tongue jacks

– (8) Hyd. cylinders

– (2) Hand winches

– (2) Chrome truck exhaust pipes

– (5) Electric motors – (1) ½ hp., (2) ¾ hp., (1) 1 hp., (1) 2 hp.

 

22. LeoRoy Rieger Estate – Esmond ND – 218-779-4943

– 1566 IH tractor, 2WD, has dozer, 6300 hrs., 20.3-38 duals (50%), good shape, nice paint, shedded, etc.

– Degelman rock picker, PTO drive, nice shape

– 28’ IHC Vibrashank w/ harrows, hydraulic wings, decent

 

23. Steven Stenson – Rock Lake, ND – 701-266-5187

– JD 615 pickup head, late model, full single point, used on 9770, excellent shape

– JD 914 pickup head, 7 belt, single point, setup for 50 or 60 series JD combine

 

24. Steve Rohrer – Oberon ND – 701-351-2102

– 743 Bobcat, 1704 hrs., SN 5025M51271, (2) new tires

– 806 International gas tractor w/ Farmhand loader & Grapple, SN 16679 S-Y

– 8×12 fish house, (8) holes, lowers to ground, 100 gal. propane tank, full, has rattle reels, wall propane furnace and propane cook plate

– 8' single stage snow blower, used on 806 tractor

 

25. Darren Larsen – Nekoma ND – 218-791-1520

– JD 4010 standard, single hyd., diesel

– JD 48 front end loader, brand new condition, fit JD 4020, 4320, 4010, etc., possibly more

– 930 R straight head w/ bat reel, has 30’ transport

 

26. Brian Knutt – Rock Lake ND – 701-351-1403

– 1987 Cat Challenger Model 65, 8600 hrs., 36” tracks, 4 hyd., 10 sp. power shift, good A/C, heat etc.

 

27. Gaylon Sieler – Cando ND – 701-230-1985

– 35’ WilRich field cultivator, inside walking tandems& harrows

– Demco 4-5 ton dry fertilizer spreader w/ tandem axle & dual spinning spreaders, 540 PTO

 

28.Douglas Wentz – Esmond ND – 701-341-1869

– 21’ Massey Ferguson pull type swather, bat reel

– Massey Ferguson #10 square baler

– (6) 710 x 170 R 38 tractor tires, ½ tread

 

29. Local Consignor

– 1996 Dodge Club Cab Ram 1500 pickup, 4WD, very good topper, V8 gas, automatic, everything works, good tires, etc.

 

30. Randy Opp – Towner ND – 701-208-0144

– 2004-2005 60’ Morris Model 8425 air seeder, hoe drill, 10” space, w/ 2006 Maxim III seeding tool, 5 meter roller plates, NH3 mid row banders w/ Raven control, triple tank, NH3, winch

 

31. Ryan Goeser – Munich ND – 701-370-9969

– JD Model 3940 Corn chopper, 2 row, 30” head

– Richardton hyd. side dump wagon

– Gehl forage box, front beater

 

32.Mike Tollefson – Devils Lake ND – 701-740-5679

– JD 510 Round baler, belts 2 years old, works good

 

33. Bruce Rinas – Egeland ND – 701-303-0275

– 27’ Model 5600 Case IH chisel, 3 bar Degelman harrows, complete walking tandems, nice shape

 

34. Clayton Krueger – Devils Lake ND – 701-303-0792

– 1680 Case IH combine, nearly new drive tires 30.5 – 32’s, 1 new rear tire, 500 hrs. on engine major overhaul

– 30’ Model 1010 Case IH straight head, finger reel, always shedded

– Summers transport, good

– Degelman reel type rock picker, PTO drive, always shedded

 

35. Other Equipment

– 30’ Case IH Model 1020 Flex head w/ finger reel & air, hyd. adjust on air, good cutter bar, very nice shape

 

36. Bryston Berg – Starkweather ND – 701-292-4162

– Raven Accuflow NH3 cooler

– (2) 42’ bin sweeps

– (2) 30” Goodyear Tracks off of Case IH Quad Trac

– (16) Yetter row cleaners off of planter

– Brush flighting Westfield end gate auger

– 2013 Polaris 50cc kids ATV

– 2001 Nissan 4WD Pathfinder

 

37. Wayne Swanson – Brocket ND – 701-739-6898

– 31’ x 6” Westfield auger w/ 11hp Briggs engine

 

38. Tri-S Farms – Wolford ND – 701-771-2408

– Many 220 cords, over 1000’ from 6/3 – 12/3 gauge wire

– GE 7½ hp. farm duty electric motor

– Steel cable, different lengths & sizes

 

39. Jim Swanson – Maddock ND – 701-730-6435

– New Holland 849 round baler

– 39’ Summers harrow

– 115 Melroe Spra-Coupe, 52’ booms, 20” spacing, tow bar

– Parkeweigh wagon, 100+ bu. capacity, digital scale, gas engine

– 8 row 30” Yetter row crop cultivator w/ NH3 setup, no nitrolator, heavy duty shanks, plus NH3 wagon hitch

– 31 x 6 Brandt auger, gas motor

– Gleaner L-M series 20’ straight header, bat reel

– Gleaner L-M series pickup head w/ Sund pickup

– Gleaner L-M series 17’ straight head w/ flex bar

– 7’ Massey Ferguson 3 pt. sickle mower

– Case IH Cat 3 Quick hitch

– 1988 Chevy R30 1 ton dually, 4 sp., strong 350 engine, 10’ steel flatbed w/ flip up gooseneck ball, rough cab

 

40. Greg & Dan Plemel – Starkweather ND – 701-230-1554 or 701-740-7082

– 1998 New Holland Model 688 round baler w/ auto wrap

– 1998 JD 9610 combine, 4200 separator hrs.

– 930JD flex head, poly points

– 930 JD straight head w/ bat reel

– (2) Factory header trailers, 30’

– 1994 Aluminum 41’ Jet hopper trailer, spring ride, 1 yr. old tarp

 

41. Kyle Teubner – Bisbee ND – 701-240-2825

– 1996 8820 Swather, 25’, 2400 hrs.

– 27’ JD 1600 chisel plow w/ NH3

– Victory blade subsoiler

– 47’ Bourgault Model 8800 field cultivator

– 66’ Summers sprayer, 500 gallon, 2 pt.

– Water pump w/ Chrysler engine, was used by Fire Dept.

 

42. Tony Koble – Rugby ND – 701-208-0211

– JD 510 baler, works good

 

43. Brocket Fire Dept. – Brocket ND – 701-304-0030

– 1966 GMC 4000, was bought new for the Lakota Fire Dept., 1000 gal. tank

 

44. Roy Kenner – Devils Lake ND – 701-351-1013 or 701-662-8318

– 1979 Ford 9000 twin screw truck, diesel

– JD 608 corn head, knife rolls full set 50%

– 70 gal. fuel tank w/ electric pump

– NH3 applicator, hydraulic driven

– TSC pickup tool box

– (2) Speed bikes

 

45. Jerry Schuster – New Rockford ND – 701-302-0362

– 1083 Case IH 8 row 30” corn head w/ ply shouts, (about 2005 Model)

– Brandt Model 420 grain cart, new gear box, roll tarp

– Model 492 9’ New Holland haybine, rubber crimper

– 1100 IHC 9’ sickle mower, trailer type

 

46. Jay Nicholas – Cando ND – 701-303-0425

– 10 x 60 Brandt grain auger, mechanical drive, hydraulic lift, bin full alarm, shedded

– Leon Model M-850 8½ yd. scraper, shedded, bought new

– (2) Canola roller

– Wil Rich 37’ field cultivator, harrows, complete walking tandems

– 25’ Saturn chisel plow w/ long tooth harrows

 

47. Eddy Co. SCD – New Rockford ND – 701-947-2436 Ext. 118

– 1982 835 Versatile tractor, S/N 035724, manual available

– CRP clipper

 

48. Larry Swenson – Cando ND – 701-303-0379

– 1993 Polaris Sportsman 400 2 stroke 4 wheeler, very low miles, exc. condition

– 2003 Nissan Maxima 4 dr. car, 3.5 V6, auto trans, drive train good, possible engine problem

 

49 Brent Kurtti – Mylo ND – 701-953-7222

– 1984 Mack tandem twin screw truck, 19’ box & hoist, roll tarp, 300 Mack inline, 6 cyl. diesel, 10 sp. transmission, super heavy duty, double frame, etc.

– 35’ Model 3400 Wil Rich chisel w/ 3 bar Summers harrows

– 54’ Wil Rich field cultivator w/ 3 bar harrows

 

50. Karl Solberg – Agate ND – 701-371-3367

– 930 JD rigid head w/ 30’ Vulcan Ironworks header trailer

 

51. Larry Vetsch – Rugby ND – 701-208-0248

– 1155 MF tractor, cab, heat, 3 pt., good 540 PTO, V8 Perkins, diesel, 1000 hrs on engine major, front weights,18.4 38 hub duals (50%), 6386 hrs., nice conditions, runs excellent, very good tractor

 

52. Alois Schmidhammer – Cando ND – 701-968-3802

– 23’ Morris chisel plow

– 24’ IH Vibrashank cultivator

 

53.Martin Kitzman – Willow City ND – 701-228-4674

– Layman stackmover, sliding wheel type, excellent machine

– #38 JD sickle mower, 9’ bar, new sickle & blades, nice condition

 

54. Brian Goeser – Munich ND – 701-370-1114

– 1985 IH S 2500 tandem truck, air brakes, pintle hitch, 11.22 5’s (80%), 302,000 miles, 855 Cummins, 9 sp. transmission

– 22’ Hawkeye pup trailer, new brakes, wheel bearing and tires, fresh paint, new tarp

– 2010 100’ Summers Ultimate sprayer, tow behind, 1500 gal. tank, Raven spray controls, 3.80/90/46 tires, no wind guards

 

55. Nick Schmaltz – Towner ND – 701-208-1272

– 2003 JD 1895 30’ No till drill w/ 340 bu. 1910 tow behind cart, 10” spacing, all meter housings replaced, good shape

– 1981 JD 8640 w/ PTO, 20.8 38’s (80%), (4) SCV’s, 9625 hrs., runs good

– 1987 Freightliner tri-axle w/ rear tag lift, 22’ Reiten aluminum box, Cummins L-10 engine, good tarp, runs good

 

56. Smith Equipment Consolidated Inc. – Knapp WI – 715-665-2000

– Unused Lowe Hyd. Auger 750 w/ 9" & 12" w/ skid steer quick attach

– Unused Stout Brush Grapple 66-9 w/ skid steer quick attach

– Unused Stout Brush Grapple HD72-4 close-tine w/ skid steer quick attach

– Unused Stout Brush Grapple XHD 84-6 w/ skid steer quick attach

– Unused Stout Rock Bucket/Brush Grapple Combo HD72-3 Open-End w/ skid steer quick attach

– Unused Stout Tree & Post Puller w/ skid steer quick attach

– Unused Stout Receiver Hitch Plate w/ skid steer quick attach

– Unused Stout Walk-Through Pallet Forks 48" w/ skid steer quick attach

– Unused Stout Full-Back Pallet Forks 48" w/ skid steer quick attach

– Unused Regular Pallet Forks 48" w/ skid steer quick attach

– Unused Stout Add-on Fork Grapple

– Unused Stout Bale Spear-Round w/ skid steer quick attach

 

57. Darrell Manning – Rock Lake ND – 701-370-8755

-Steiger Panther ST 325, 3406 Cat, $36,000 just spent on engine and (8) new tires (less than 600 hrs.), 8800 total hrs., set up for air seeder

– 14’ 1380 JD mower conditioner, hydro swing, new wobble box ($1400)

– (4) Bundles of 3 – 3½ x 7’ new wood posts

– JD Model 510 round baler, mechanically good, needs floor belts

 

58. David & Gary Hill – Willow City ND – 701-228-4286

– 1995 Case IH 955 planter, 12 row x 30 vertical fold, R.W.A., Dawn trash whippers

 

59. Jesse Fahnestock – Willow City ND – 701-871-5015

– NH 791 manure spreader

 

60. Roger Rance – Egeland ND – 701-739-7441

– Pallet of harrow teeth, cultivator shovels, gas powered generator, other misc. items

 

61. Wayne Rutledge – Langdon ND – 701-370-5992

– 320 bu. creep feeder w/ gates, newer unit, load from top

 

62. Rick Schanz – Langdon ND – 701-370-1958

– Otto rock picker, heavy duty type w/ good cutter bar, chain basket, 4 cylinders (2 on dump and 2 on basket), long pole, large flotation tires, exc. condition

– 560 Handlair grain vac, 1000 PTO, recently gone through converted to 660 model, dust catcher, muffler, comes w/ 6 telescoping tube w/ 6”spout, converts down to 5” flex tube, 5” spout & 5” cleanup spout

52’ Reefer trailer for spraying, has (2) 1400 gal. front tanks (2) 1600 gal. rear newer tanks, complete unit w/ pump & hoses

– Johnson Hygrade blade, 14' six way blade with rear steer, works great for maintaining, back sloping, and digging new ditches, very good condition

 

63. Terry Hertzell – Calvin ND – 701-370-0699

– (2) 35’ JD Model 635 flex heads, air bars, both very nice shape

– (2) 35’ Header 4 wheel Mollers MFG trailers

– (2) Model 960 Farm King snow blowers, one has hyd. spout, newer series – red w/ cream, nice shape

– Hutchinson grain cleaner, 220 electric

– Gehl grinder mixer

– 7 x 16 H&H enclosed trailer, like new w/ ramp door, tandem axle

– Smaller PJ 12’ utility trailer w/ ramp

– 4 x 8 Utility trailer

– 2 place snowmobile trailer

– 1983 Northwood 16’boat, 28hp Evinrud, trailer has rollers & spare, live well, nice, boat, water ready, kept up, etc.

– JD Steamer pressure washer w/ hose reel, 2000 PSI, 2.8 GPM, 2 yrs. old, nice

– Allied steamer pressure washer, 2300 PSI, 2.3 GPM, works good

 

64. Allan Brossart – Rugby ND – 701-208-0821

– JD 7000 8 row 30” finger planter w/ dry fertilizer, bean cups, corn, sunflower fingers, pull type planter

– 6 x 20 DN gooseneck stock trailer

 

65. Josh Anderson – Rugby ND – 701-215-1005

– 9 ton mobility pull type fertilizer spreader, double fan, recently gone through, nice shape

– 25’ MacDon pull type swather, end cutter, finger reel, shedded, nice shape

– 28’ enclosed van spray trailer for semi, (2) cones, pump, 3200 gal. tank, field ready

– 1968 Chevy single axle grain truck, 327, 4 bolt main, 4 + 2, roll tarp, steel box & floor

 

66. Brad Fritel – Willow City ND – 701-208-0893

– 12” x 78’ Sakundiak auger, 540 PTO, w/ reverser, elec. hopper winch, newer auger about 2012 model, mechanical drive

– 8” x 50’ Cenex PTO auger w/ swing away hopper

– 7” x 40’ Brandt w/ 13 hp. Honda, elec. start

– Convey-All Model 1035 Conveyor w/ 220 3 phase motor

– 35’ conveyor w/ hyd. drive

– 12’ Degelman dozer blade w/ mounts, used on 8650 last, set up for universal mounts – Set of NH3 running gear

– 1500 cone bottom poly tank on stand

– 1650 gal. black poly tank

– (6) 20.8 R 42 tractor tires, used, some tread left

 

67. Roger Kenner – Leeds ND – 701-466-2800

– Approx. (12) heavy duty 16’ Verns cattle feed bunks, 8” deep

– Koffler creep feeder, 140 bu. w/ gates

 

68. Clark Steinhaus – Devils Lake ND – 701-739-4402

– International Super A industrial tractor #1AA, S/N 194128, runs good

– 15KW Commercial Kohler generator, diesel w/ 234 hrs., 120/240 single phase, can be reconnected for 3 phase, uses less than 2 gal. fuel per hr. at full load, runs excellent, load tested approx. 10 hrs. ago by Interstate Detroit Diesel, excellent condition

– 80” FarmKing snow blower, 540 PTO, 3 pt., works good

– JD 250 skid steer w/ 1934 hrs., complete engine rebuild/new sleeve assembly, rods & mains, pin bushings, new battery, still has JD break-in motor, bucket included

 

69. Nyle Myhre – Sheyenne, ND – 701-996-2654

– 6’ x 16’ Hale livestock trailer, bumper hitch, tandem axle

– 40 gal. fuel service tank

 

70. Warren Anderson – Rolette ND – 701-550-0245

– 1947 8N Ford tractor, exc. rubber, ready for paint

 

71. Ramsey Delorme – Belcourt ND – 701-278-2128

– INT 340 utility loader tractor, 3 pt., live power, new battery, gas, new tires in back

 

72. Cando Farmers Grain & Oil – Cando ND – 701-968-4446

– (4) sets of running gear

– Pallet of new implement wheels

– Pallet of new car & implement tires, asst. sizes

 

73. Don Bertsch – Starkweather ND – 701-739-9889

– 10” x 61’ Westfield MK 100-61 low profile swing out auger

– 7” x 36’ Buhler Farm King, 13hp Honda gas motor, elec. start

– 1984 Clemenson belly dump heavy duty 20 yd. gravel trailer, air operated, triple axle

– 10” Westeel takeout extension, 10 hp. motor

 

74. Arlen Lindberg – Bisbee ND

– 6 x 10 Homemade trailer

– 4 x 8 enclosed decoy trailer, 4’ high

– (2) Boat trailers, good tires, need work

– (4) Aluminum rims for 2005 Ford Ranger

– (4) Car tires

 

75. Pat Lagien – Rock Lake ND – 701-367-6387

– (4) 24.5 x 32 10 ply band duals (30-35%)

– (2) 23.1 x 26 10 ply tires on JD rims from JD combine

 

76.  3 TK Farms – York ND – 701-351-3744

– 42’ JD Model 610 chisel plow, 3 bar Morris harrows

– 1/3 hp. Gould well pump

 

77. Darold Schmaltz – Rugby ND – 701-208-0549

– Rockomatic HDW5 20’ rock picker& windrower, new tires, high dump bucket, good machine

– 8” WestGo takeout tube for 30’ grain bin

– (2) 12” 110 volt aeration fans

 

78. Ron Schill – Langdon ND – 701-305-0411

– 1990 GMC 1 ton 4WD dually ext. cab long box, brand new 454 engine (reg. GM motor), power locks, windows, etc., 4 sp. manual transmission, 5th wheel plate, brand new tires, clutches, radiator, exhaust, water pump, etc., completely gone through, outstanding unit, runs strong

– 28’ JD Donahue trailer, very straight, new planks

– 1000 gal. fuel tank w/ Gas Boy pump

– 500 gal. tank no pump

– Dirt bucket for Skid steer

– Bucket w/ grapple for skid steer

 

79. Chad Haberstroh – Sarles

– 6614 Walinga grain vac, nice, shedded

– Conveyair grain vac    – (Please change Neuro to Conveyair)

– (4) Big metric tires 520/85R46, 1100 hrs. (75-80%)

–  (2) 18.4 38 JD hub duals (exc.)

 

80. Randy Vetsch – Rugby ND – 701-680-2420

– Aeration equipment

– 100 gal service tank

 

81. Vernon Samuelson – Sarles ND – 701-697-5163

– Neuro grain vac, ready to go, stored inside

 

82. Tim Sager – Cando ND – 701-741-2246

– 2010 New Holland L175 diesel skid steer, 2 sp., deluxe cab, block heater, weight package, high flow hydraulics, road work lights, 72” bucket w/ bolt on cutting edge, only 118 hrs., excellent unit

– 1967 International Loadstar 1600 single axle grain truck, 345 engine, 4+2, 9:00 20’s (50-60%), 15’ box & nearly new 2 way hoist, roll tarp, 56780 miles, been repainted, nice truck

– 16 hp. Kohler auger engine, elec. start, runs good

 

83. Duane Bauerle – Harvey ND – 701-340-1970

– H International tractor

 

84. Rick Syvertson – Willow City ND – 701-228-6447

– 70’ Brandt 7000 Commander heavy duty harrow, good teeth, field ready, good tires, nice shape

 

84. Tim Syvertson – Willow City ND – 701-228-6095

– 12 row Case IH 800 planter

– 1979 4640JD, 3 hyd., 18.4 38 hub duals (50%), 3 pt. w/ heavy duty quick tach, has outback for autosteer w/ S-2 monitor, 2700 hrs. on complete brand new motor, 8000 hrs. total, quad range

 

85. Josh Knutt – Bisbee ND – 701-351-4621

– WestGo 7” x 40’ auger, 220 elec. 10 hp. Motor, single phase, has reverser

– 16 row 30” strip till Blue Jet AT5000 applicator equipped w/ Concord 3000 cart, hyd. fan. Does dry & NH3 together, all new fertilizer tubes, has NH3 bullet on cart, nice shape

– 1989 Case IH 45’ 8500 hoe drill, 7½” space, Atom Jet openers, hyd. fan

 

86. Bill Franzen – Lakota ND – 701-739-4388

– Approx. 20’ Trail Eze Dakota MGR triple axle heavy equipment hauling trailer, pintle hitch, flip up ramps, very heavy duty, 4000 lb. capacity, good unit

 

 87. Steve Biby – Leeds ND – 701-351-1304

– 2010 Wilson triple axle trailer, 48'x78"x102", roll tarp, air ride, ag hoppers

 

88. Kelly Westby – Cando ND – 701-741-8939

– 1000 gal tandem axle factory fuel tank, red, both pumps 110V an 12V,  exc., like brand new (new price was $8000)

– 8500 Watt gas powered generator

 

89. Hayden Larson – Bisbee ND – 701-391-2826

– 12 row 30" JD 7000 planter w/ liquid fert., & (2) 250 gal. tanks, 1.6 bu. box

– 930 JD header w/ seed eater sunflower pans & reel

– 16' tandem axle Pup trailer w/ Roll-Lok roll tarp

 

90. Steve Walsh – Mylo ND – 701-382-9254

– 90' Summers Ultimate Hi wheel sprayer, 1000 gal. tank, Raven 440 controller

– Rem 1026 grain vac

 

91. Robin Gingerich- Mylo ND – 701-871-0064

– JD 8760, 4 hyd., 20.8 R 42’s (new insides, outsides 70%), approx. 5200 hrs

– JD 8640, PTO, 50 Series engine, 20.8 38’s

– JD 4430, Quad range, 3 pt., 18.4 38’s (good), engine overhauled in last 10 years

– 39’ Flexicoil 5000 air seeder w/ 1720 tow between cart, 7 ½” spacing, eagle beak, carbide tips, new bearings in meter boxes & press wheels in 2017

– 1974 GMC single axle grain truck, gas, 350 engine, new roll tarp

– 1976 Chevy single asle grain truck, gas, 366 engine, roll tarp

– 25’ JD 590 swather

– 8 wheel side rake

– 1026 Rem grain vac

– JD 355 offset disk

– Leon rock picker

– 3 tube Kwik Clean grain cleaner

– 660 New Holland baler w/ auto wrap

 

92. Chris Keating – Devils Lake ND – 701-739-5148

– NYB ground sprayer mounts on 3 pt., 90’ booms, 750 gal. tank, used very little

 

93. Travis Westlind – Cando ND

– Pup grain trailer, hoist, roll tarp, pintle extended hitch, air/hyd.

 

94. Conrad Steinhaus – Crary ND- 701-430-9968

– 12 KW Winpower PTO driven generator on 2 wheel cart

 

95. Ron Slaubaugh – Rugby ND – 701-771-8699

– 1993 30’ JD 930 straight head w/ bat reel & transport, 300 hrs. on new wobble box, always shedded, nice shape

 

96. Jason Martodam – Leeds ND – 701-550-0562

– 2004 Chevy Suburban LT, fully loaded, leather, sunroof, 160000 – 170000 miles

– 1989 20’ Bayliner ski boat, in/out board, 5.0 liter engine

 

97. Lowell Hamre – Hampden ND – 701-868-3622

– 48½’ DMI Tigermate field cultivator, walking tandems

 

– 98. Russell Kleinsasser – Chasely ND – 701-341-1369

– 1981 GMC tandem twin screw grain truck, 5+2, 8.2 Detroit big block diesel, 90,000 total miles, brand new engine put in at 63,000 miles, tip tops, swingout gate, roll tarp, tires 90%, always shedded, excellent condition

 

99. Mark Krebsbach – Oberon ND – 701-303-0451

– 16’ Lee car trailer, bumper hitch, 2” ball, new deck, wiring, lights, wheel bearings, 10 ply tires, and Chevy rally wheels less than 500 miles ago, has title

 

100. Cody Buchholz – Rolla ND – 406-855-9594

– 4 wheel running gear

– Silage chopper dump wagon

 

101. Todd Lysne – Rugby ND – 701-208-1417

– 90’ Flexicoil Model 67XL sprayer, suspended boom, triple knozzle bodies, Flexicoil auto rate, 1500  gal tank, rinse tank, mixing cone, pump & hyd. motor 2 yr. old

– Continental NH3 nitrolater w/ hyd. shut off & manifolds

 

102. Scott Langton – Crary ND – 701-350-1938

– 2012 612C 12 row JD corn head, very low hrs, good condition

 

103. Fred Rance – Devils Lake ND – 701-230-3205

– 955 Case IH 16 row planter w/ granular applicators

– 1977 Ford F150 pickup w/ 8’ flatbed, 351 modified engine

– Hay rake

– (2) Canola rollers

– 1200 gal. water tank

 

104. Duane Brossart – Willow City – 701- 208-0157

– 10 x 71 Westfield auger w/ swing out hopper, low pro, mechanical drive

– 10 x 70 Sakundiak auger w/ swingout hopper, low pro, mechanical drive

 

105. Troy Voeller – Rugby ND – 701-208-1591

– 1980 Chevy C60 single axle truck w/ 16’ box & hoist, roll tarp, swinging end gate, pusher axle

– 1071 C50 Chevy single axle grain truck w/ 14’ box & hoist, roll tarp, swinging end gate

 

106. Jason Leer – Wolford ND – 701-771-2593

– 90’Summers Ultra Hi Wheel sprayer, 1000 gal. tank, 200 gal. rinse tank, chemical induction mixing cone, 3 sets of nozzles, Raven 450 auto rate controller

 

107. Ritterman Trucking LLC – York ND – 701-739-0995

– Triple axle pintle hitch flatbed trailer, haul tractor/bobcat

 

 108. Mertes Implement – Bowbells ND – 701-339-1153

– 50’ Access Unlimited (same as Mandako) land roller, 1 yr. old, heavy duty excellent unit, 2500-3000 acres

 

109. Reginal Herman – Minnewaukan ND – 701-473-5707

– Lee Portable service tank w/ pump on tandem trailer

– Wood chipper w/ 11hp Briggs & Stratton

– Water pump w. 5 ½ hp Honda engine

– Emglo portable air compressor w/ 5 ½ hp Honda engine

– Chemical cone agitators

– Pacific heavy duty commercial trash pump

– Pacific heavy duty commercial power washer, 2200 PSI, 2.5 GPM

 

110. Tyler & Glenn Keller – Harvey ND – 701-341-7271

– 60’ Summers pickup box sprayer, 350 gal tank, triple nozzle bodies, 2 sets nozzles, foam markers, 5 ½ hp. Honda motor, Raven controller

– Sure-weigh calf scale on trailer, manual

 

111. Tom Freund – Cando ND – 701-351-0096

– 50” Hardi pickup sprayer w/ gas engine & pump, foamers

 

112. Jeff Greig – Rugby ND – 701-208-0897

– 30’ JD header

 

113. Shay Harmel – Wolford ND – 7001-208-1381

– 275-80-22.5 semi tires ( 50%)

 

114. Merrill Truedson – Harvey ND – 701-341-0026

– 10×60 Westfield auger, swing out hopper

– 7×46 Sakundiak auger w/ gas motor, self-contained drag auger

 

115. David Ambers – Minnewaukan ND – 701-740-7461

– 1500 gal. NH3 tank

– 5 tube Kwik Klean grain cleaner

 

116. & 120. David Freund – Cando ND – 701-370-0766

– 643 JD 6 row corn head

– 90’ Summers pickup sprayer w/ monitor, Honda engine & good pump

 

117. Jim Berg – Starkweather ND – 701-351-3511

– JD 7200 12R-30 row crop planter, front fold, liquid fertilizer tank, low acres, extra vacuum seed disks & parts, 200 monitor, field ready, good unit

 

118. Jody McGarvey – Leeds ND – 701-739-2468

– Tires, truck parts, etc.

 

119. Eric Jacobsen – Rugby ND – 701-208-0547

– 1450 gal. NH3 tank

 

121. James Martodam – Moorhead MN – 701-230-1431

– New Holland 1475 Haybine

 

122. Richard Wangler – Rugby ND – 701-208-1780

– JD 258 loader

– Bucket

– 7” x 50’ Sakundiak, PTO

– Good truck tires

 

123. SCR – Minot ND – 701-852-0934

-204 International tractor

 

124. Matt Klein – Knox ND – 701-771-7241

– 1995 Suburban 4WD

Notes:

 

Visit our websites at www.midwestauctions.com/dakota or www.globalauctionguide.com or www.dakotaauctioneers.com

Dakota Auctioneers, Larry Swenson, (701) 968-4224 Office or (701)-303-0379 Cell

Disclaimer:

Announcement: Information contained herein is presented on behalf of the seller. Dakota Auctioneers, agent for the seller, cannot guarantee the information to be correct or assume the liabilities for errors and omissions. All lines drawn on maps are approximate. Buyers should verify the information to their own satisfaction. Any announcements made from the auction block on day of auction will take precedence over any matter of print and will be final.