Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment. For information contact Leon, 701.653.5588 or Louis, 701.652.5088 or Justin Ruth at Steffes Group, 701.237.9173 or 701.630.5583.

FARM RETIREMENT AUCTION

 

LOCATION: From Fessenden, ND, 6.7 miles south on US-52. From intersection ND-200 & US-52, 7.1 miles north on US-52, (990 Hwy 52, Fessenden, ND 58438)

 

AUCTIONEER’S NOTE: Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment.  

 

TRACTORS

1995 Ford 9880 4WD, CAH, quad range, 4 hyd., return flow, 520/85R42 Michelin triples at 95%, 6,805 hrs., S/ND102512

1994 New Holland 9680 4WD, CAH, 12 spd., 4 hyd., (8) front suitcase weights, (34) rear suitcase weights, Michelin 520/85R42 dual tires at 85%, 6,176 hrs., S/N100992

1995 Case-IH 7240 MFWD, CAH, 18/4 powershift, 4 hyd., 3 pt., quick hitch, 1000 PTO, return flow, (18) front suitcase weights, 380/85R30 front tires, 480/80R42 rear duals, 6,244 hrs., S/NJJA0061541

1994 Ford 8970 MFWD, CAH, powershift, 3 pt., 4 hyd., 1000 PTO, Mega Flow quick hitch, return flow, Super Steer, (16) front suitcase weights, 14.9R30 front tires, 480/80R46 rear dual tires, 7,557 hrs., S/ND401296

1980 Case-IH 2090 2WD, CAH, partial powershift, 3 hyd., 3 pt., 540/1000 PTO, diff lock, w/Case-IH 90 hyd. loader, quick tach, 8′ bucket w/grapple, 14.9R46 rear single tires, shows 1,365 hrs., S/N9904

 

COLLECTIBLE TRACTORS

1965 Oliver 1850 2WD, 2 hyd., 3 pt., 1000 PTO, 18.4-34 tires, shows 2,927 hrs., S/N156200 

1959 Case-IH 800 2WD, diesel, Case-O-Matic, eagle hitch, 540 PTO, hub weights, 18.4-30 rear tires, S/N814415  

1959 Case-IH 600 wide front, gas, 2 hyd., eagle hitch, PTO, Case-O-Matic Ezee-On hyd. loader, 6′ bucket, 13.6-28 tires, unknown hrs., S/N6122810

Allis Chalmers WD for parts

 

GPS EQUIPMENT

Trimble EZ Guide 250 display w/EZ steer, receiver, wire harness

Trimble EZ Guide 250 display w/EZ steer, receiver, wire harness

Trimble EZ Guide 250 display w/EZ steer, receiver, wire harness

Trimble EZ Guide 500 display w/EZ steer, receiver, wire harness

Trimble EZ Guide 500 display w/EZ steer, receiver, wire harness

 

COMBINES

Case-IH 2388, axial flow, AFX rotor, field tracker, AHH, Y&M w/display, chopper, spreader, rock trap, Maurer hopper ext., ext. unload auger, rear axle weights, 30.5L-32 front tires, 14.9-24 rear tires, 1,708 sep. hrs., 2,155 engine hrs., narrow and wide concaves, S/NJJC0273802

Case-IH 2388, axial flow, AFX rotor, AHH, grain loss monitor, chopper, spreader, rock trap, Crary hopper ext., Y&M w/display, (2) sets concaves, 30.5L-32 front tires, 14-9-24 rear tires, 2,913 sep. hrs., 3,731 engine hrs., narrow and wide concaves, S/NJJC0269454

 

HEADS & HEADER TRAILERS

New Holland 970 pickup head, 9′, Sund pickup, wind suppressor, S/N472372

IHC 810 pickup head, 6-belt pickup, windguard, S/N50092

Case-IH 1010 rigid head, 30′, AHH, bat reel, Headsight, S/NJJC0124862

Case-IH 1010 rigid head, 30′, AHH, bat reel, Headsight, S/NJJC0129543

Case-IH 1020 flex head, 30′, AHH, hyd. fore/aft, finger reel, AWS airbar, SCH cutting system, S/NJJC0333184

2005 MacDon 974 flex draper, 30′, hyd, fore/aft, finger reel, slow spd. transport, hyd. header trailer, (1) season on New canvas belts, set up for 88 Series, S/N165675

Case-IH 1083 non-chopping corn head, 8×30″, poly snouts, knife rolls, S/NJJC0071702

Case-IH 1063 non-chopping corn head, 6×30″, poly snouts, knife rolls, S/NJJC0335597

Single pole header trailer, 30′

Single pole header trailer, 30′

Single pole header trailer, 30′

Single pole header trailer, 25′

4-Wheel header trailer

 

GRAIN CARTS

Brent 620 grain cart, 13″ hyd. fold auger, 1000 PTO, rear hitch, roll tarp, 24.5-32 tires

Parker 4500 grain cart, 12″ hyd. fold auger, 1000 PTO, roll tarp, 28L-26 tires

 

PULL-TYPE PLANTERS & AIR SEEDERS

Case-IH 1200 pull-type pivot planter, CCS, 16×30″, drawbar hitch, 1000 PTO, hyd. pump, spring down pressure, Pro 600 display, Martin floating trash whippers, variable rate hyd. drive, flex frame, liquid fert. in-row w/12v pump, (2) 200 gal. poly tanks, hyd. markers, corn and bean plates, S/NCBJ0018763

John Deere 1760 conservation pull-type planter, 12×30″, front fold, John Deere 250 monitor, 1.6 bu. boxes w/ext., MaxEmerge Plus units, mechanical drive, HD spring, down pressure, Yetter pin adj., liquid fertilizer in-row, 12v pump, (2) 200 gal. poly tanks, trash whippers w/minimum till coulter, hyd. markers, radar, rear hitch, corn/soybean/sunflower/edible beans, precision corn plates, low acres on New disc & bearings, S/NHO1760F675650

Flexi-Coil 5000 air seeder, 45′, 10″ space, 5-section fold, Hiniker NH3 cooler, double chute, harrow bar, Flexi-coil 2340 commodity cart, twin compartment, loading auger, 28L-26 Diamond tires, Air Seeder S/NAD104115, Cart S/N120062-02

Flexi-Coil 5000 air seeder, 33′, 7.5″ spacing, 3-section fold, Raven NH3 super cooler, rear hyd. hitch for NH3, Flexi-Coil 2320 commodity cart, single compartment, loading auger, mechanical drive, 23.1-26 tires, New air tubes, Air Seeder S/NADB0000-T078028, Cart S/N62320AO-5069357

 

SEED TENDER

Friesen 375RT seed tender tri-axle trailer, 2-compartment, Honda GX160 gas motor, electric start, 180 degree swing conveyor, roll tarp, electric brakes, 2-5/16″ ball

 

TILLAGE & ROW CROP EQUIPMENT

Summers HD 5-bar harrow, 72′, 11L-15 tires, S/NK0547

Case-IH 5600 chisel plow, 28′, 3-section fold, 3-bar Degelman harrow  

Wil-Rich Quad 5 cultivator, 50′, floating hitch, 5-section fold, walking tandems, 3-bar harrow

Wil-Rich Quad 5 cultivator, 40′, floating hitch, 3-section fold, walking tandems, 4-bar harrow

Summers Super Coulter Plus vertical tillage, 40′, 3-section, 21″ blades, weight pkg., scrapers, 3-bar harrow, 12.5L-15 tires, S/NH0563

Wil-Rich pull-type stalk chopper, 22′, 1000 PTO, good knives, (4) gauge wheels, light kit, S/N55258

John Deere 2 bottom plow, mechanical lift, coulters

Case-IH 183 row crop cultivator, 12×30″, 3 pt., 3-section fold  

 

SEMI TRACTORS & TRUCKS

1999 IHC 9400 Eagle tandem axle, 42″ midroof sleeper, Cummins N14PWS, Eaton Super 10 spd., air susp., air slide 5th, cruise, engine brake, diff lock, dual aluminum fuel tank, Ali Arc HD aluminum front bumper, poly 1/2 fenders, 220″ WB, 11R24.5 on all aluminum wheels, 657,180 miles

1998 Volvo VNM64T tandem axle day cab, Detroit Series 60, Eaton 9 spd., air susp., air slide 5th, diff lock, engine brake, cruise, 4:11 ratio, poly 1/2 fenders, 166″ WB, 11R22.5 tires on steel rims at 90%, approx. 550,000 miles, *Odometer not working*, S/N4VG7DARF8WN752600

1995 Ford Aeromax L9000 tandem axle day cab, Cummins M11, Eaton 10 spd., air susp., diff lock, dual aluminum fuel tanks, poly 1/2 fenders, 169″ WB, 11R24.5 tires on steel rims, 523,990 miles

1969 Ford C-600 cabover single axle, 390, 5&2 spd., 16′ box w/hoist, wood floor, 9.00-20 tires, *Not running*  

1968 GMC 5500 single axle, 350 V8, 4&2 spd., 13′ steel box w/hoist, roll tarp, 8.25-20 on tires, shows 108,899 miles

1986 IHC 1954 tandem axle dump truck, DT466, Eaton 13 spd., spring susp., 15′ steel box & hoist, 10.00-20 tires, 129,054 miles

 

PICKUP

1979 Ford F250 Ranger XLT ext. cab, automatic, 460, 4WD, 8′ box, 4:10 ratio, posi rear, 5th wheel ball hitch, 235/85R16 tires, shows 23,179 miles

 

TRAILERS

2012 DCT tandem axle gooseneck flatbed trailer, 26’x100″, wood deck, 12″ crossmember spacing, oil bath hubs, 4′ axle spread, 10,000 lb. axles, 235/80R16 dual tires                                                                           

Shop-Built tri-axle gooseneck flatbed trailer, 20’x100″, spring susp., wood deck, trailer house axles

 

HOPPER BOTTOM TRAILERS

2012 Neville tandem axle aluminum hopper bottom, 40’x96″x66″, extra high clearance ag hopper, spring susp., Shur-Co electric roll tarp and hopper openers w/wireless remote, sight glass, 11R24.5 tires on (4) aluminum rims, *Tires and brakes at 85%*  

1996 Timpte Super Hopper tandem axle, 42’x96″x78″, non-ag hopper, spring susp., Thunder 600 electric roll tarp, 2 spd. traps, 11R24.5 on aluminum rims

1975 Fruehauf tandem axle hopper bottom, 38’x96″x72″, spring susp., roll tarp, 11R22.5 tires on budd rims

1995 Dakota tandem axle steel hopper bottom, 30’x96″x66″, spring susp., side chutes, roll tarp, 11R24.5 tires on steel rims

 

NH3 EQUIPMENT

Dakon NH3 knifer, 13×30″, 3-section fold, rear hitch, John Blue pump

NH3 tank on running gear  

Dual NH3 tanks on DMI running gear  

HAY EQUIPMENT

Massey Ferguson 39 pull-type 6-wheel rake

Shop-Built bale spear, 3 pt.  

 

GRAIN HANDLING EQUIPMENT

Sunco rotary grain cleaner, 1-1/2 hp., 1 phase, 200v, fill auger w/hopper, on transport  

Rem 2700 grain vac, 1000 PTO, 7″ tubing and flex hose, hyd. fold auger, clean up kit, 269 hrs., S/NRM-2700-0918

Hyd. drill fill auger, 15’x5″, w/adj. spout  

Jump auger, 9″, hyd. drive, transport wheels  

Grain Chief loadout auger, 60’x8″, 540 PTO, on transport  

Westgo loadout auger, 45’x8″, 540 PTO, on transport  

Westfield WR80-36 loadout auger, 36’x8″, 5 hp., 1 phase, electric motor, on transport, S/N195009

Westgo loadout auger, 40’x7″, 540 PTO, on transport  

Westfield MKX100-73 auger, low pro swing, 540 PTO, 12v auger jogger mover, 12v hopper winch lift, S/N269307

Farm King 1070 auger, 70’x10″, low pro swing mechanical drive, 540 PTO, S/N9104684

2008 Brandt Grainbelt 1535TD belt conveyor, 35’x15″, 7-1/2 hp., 1 phase, EZTRAK belt tensioner, S/N87459

Brandt 1545 conveyor, mechanical lift, 10 hp. electric drive, 1 phase

Conveyor, 36′, 10″ belt, *No motor*  

 

OTHER EQUIPMENT

Tough-T rock nabber, 3 pt., hyd. cyl.

Leon 3000 rock picker, hyd. reel, hyd. dump

Eversman 600 pull-type scraper, laser mast  

Industrias America 140R pull-type scraper blade, hyd. tilt & swivel

New Holland 456 pull-type sickle mower, 9′ bar, hyd. lift, bolt-on section, S/N240406

Bush Hog mower, 60″, 3 pt., solid rubber tail wheel

Woods BW1800XQ batwing mower, 15′, double wing, 1000 PTO, dual wheels on main section, S/N1227711

General CFX15.5 batwing mower, 15′, 1000 PTO, safety chain, S/N0423120012

Allied 1080 snowblower, 9′, 2-stage, 3 pt., dual auger, 1000 PTO, hyd. swivel, hyd. spout  

Inland DA92 snowblower, 90″, 540 PTO, 3 pt., double auger, hyd. spout, S/N861

King Kutter II tiller, 60″, 3 pt., 540 PTO  

King Kutter II tiller, 6′, 3 pt., 540 PTO  

 

SKID STEER ATTACHMENTS

Bale fork for skid steer, quick hitch

Skid steer snow blade, 7-1/2′, hyd. adj., universal skid steer mounts 

Shop-Built log splitter, rotates 180 degrees, 12″x5″ ram, universal skid steer mounts  

 

HOPPER BINS & BIN PARTS

2013 Micada galvanized steel hopper bottom bin, approx. 3,800 bu., 18′ diameter, double ring base, aeration tubes w/3 hp. fans, manhole, ladder, *Bin #9*, S/N13610

2013 Micada galvanized steel hopper bottom bin, approx. 3,800 bu., 18′ diameter, double ring base, aeration tubes w/3 hp. fans, manhole, ladder, *Bin #10*, S/N13609

2013 Micada galvanized steel hopper bottom bin, approx. 3,800 bu., 18′ diameter, double ring base, aeration tubes w/3 hp. fans, manhole, ladder, *Bin #11*, S/N13611

2002 Micada steel hopper bin w/Micada galvanized top, approx. 3,000 bu., 14′ diameter, double ring base, aeration tube w/Grain Guard 3 hp. 220v fan, manhole, ladder, S/N02251

Meridian GrainMax MGM 4000 steel hopper bins, 4,000 bu., 15′ diameter, double ring base, Rocket Tube aeration w/Grain Guard 3 hp. fan, manhole, ladder, sight glass, Bin #1, S/N6220101132623

Meridian GrainMax MGM 4000 steel hopper bins, 4,000 bu., 15′ diameter, double ring base, Rocket Tube aeration w/Grain Guard 3 hp. fan, manhole, ladder, sight glass, monitor cable, Bin #2, S/N6220100330106

Meridian GrainMax MGM 4000 steel hopper bins, 4,000 bu., 15′ diameter, double ring base, Rocket Tube aeration w/Spread All 3 hp. fan, manhole, ladder, sight glass, Bin #3, S/N6220100129211

Meridian GrainMax MGM 4000 steel hopper bins, 4,000 bu., 15′ diameter, double ring base, Rocket Tube aeration w/Grain Guard 3 hp. fan, manhole, ladder, sight glass, Bin #8, S/N6220130141061

Meridian M1620 epoxy-lined steel hopper bins, 4,000 bu., 15′ diameter, aeration tube w/Caldwell 3 hp. fan, ladder, sight glass, manhole, poke hole, Bin #5, S/N6220090727150

Meridian M1620 epoxy-lined steel hopper bins, 4,000 bu., 15′ diameter, aeration tube w/Caldwell 3 hp. fan, ladder, sight glass, manhole, poke hole, Bin #7, S/N6220090727147

Meridian GrainMax MGM 4000 steel hopper bin, 4,000 bu., 15′ diameter, single ring base, aeration tube w/Spread All 3 hp. fan, manhole, ladder, sight glass, poke hole, Bin #4, S/N6220091028352

Meridian GrainMax MGM 4000 steel hopper bin, 4,000 bu., 15′ diameter, single ring base, aeration tube w/GSI 3 hp. fan, manhole, ladder, sight glass, poke hole, Bin #6, S/N6220091028350

Steel hopper bin, approx. 2,500 bu., 13′ diameter, single ring base, ladder, manhole

Caldwell aeration fan, 18″, 1-1/2 hp., 110v  

Aeration fan, 14″, 1 hp., 110v  

Asst. bin sweeps, 1 hp., 110v motors  

 

FUEL TANKS & WATER TANK

Delta 105 gal. L-shape fuel service tank, GPI 12v pump  

100 gal. fuel service tank, w/GPI 12v pump, tool storage on top  

1,000 gal. fuel tank w/Gasboy pump  

Fuel tank, 1,000 gal. w/Bennett pump, 110v  

Westeel fuel tank, 1,200 gal., Gasboy pump  

Westeel fuel tank, 1,200 gal.  

(2) Galvanized water tank, 14’, 24″ deep  

 

TIRES

(2) sets of Case-IH 18.4-38 tires on 10-hole rims  

(2) sets of 18.4-38 tires on 10-band dual rims  

 

SHOP EQUIPMENT & PARTS

Honda TT55G portable air compressor, gas, GX160 motor, hose reel  

Lincoln DC welder, Wisconsin gas motor, 300 amp.

(2) Trailer axles, 7′, 6,000 lb. cap., leaf spring susp., electric brakes, 5-bolt hubs  

Flexi-Coil rear hitch assembly, w/Warn 6,000 lb. winch, NH3  

(12) Case-IH suitcase weights  

(16) Case-IH 1.5 bu. hoppers, for 1200 planter   

Flexi-Coil manifolds for double shoot air seeder  

Asst. hyd. cylinders  

Briggs & Stratton engine, 3-1/2 hp., 2″ transfer pump  

Cat II 3 pt. hitch  

Cat II 3 pt. hitch

200 ft. of 220 cord

HD chains

Asst. farm support items

Asst. shop equipment

Standing cattle panels

 

LEON, 701.653.5588 or LOUIS, 701.652.5088

or Justin Ruth at Steffes Group, 701.237.9173 or 701.630.5583

 

 

Photo Gallery