Major equipment begins selling at 11:00 AM. Live online bidding available on major equipment. For information contact Scott Huso, 701.789.9800 or from Steffes Group, Brad Olstad 701.237.9173 or 701.238.0240, or Tadd Skaurud 701.237.9173 or 701.729.3644.

FARM RETIREMENT AUCTION

LOCATION:  From Main Street in Aneta, ND on the east edge of town, 1-3/4 mile southeast on County Road 7, followed by 3/4 mile east on County Road 7, north side of road; or from Sharon, ND, 4 miles north on County Road 7, followed by 2 miles west on County Road 7.   

 

AUCTIONEER’S NOTE: Major equipment begins selling at 11:00 AM.  Live online bidding available on major equipment.  

 

Items highlighted in yellow are additions or changes from the original posting

 

4WD TRACTORS

2004 New Holland TJ500, deluxe cab, buddy seat, powershift, 4 hyd., return flow, front & rear diff lock, Trimble EZ-Steer w/150 display, 520/85R46 triples, 3,260 hrs., S/NZ8F109873

2002 Buhler 2425, deluxe cab, 12 spd., 4 hyd., return flow, front & rear diff lock, 710/70R38 duals, 6,202 hrs., S/ND108663

 

MFWD & 2WD TRACTORS

2003 Buhler 2160, MFWD, CAH, powershift, Super Steer, 4 hyd. 3 pt., front suitcase weights, 1000 PTO, diff lock, 380/85R30 front tires, 380/90R46 hub duals, 6,151 hrs., S/N121601

1991 Case-IH 7140, MFWD, CAH, 18/4 powershift, 3 hyd. 3 pt., 1000 PTO, diff lock, 14.9R30 front tires, 480/80R42 hub duals, 11,032 hrs., S/NJJA0033672

1990 Case-IH 685, open station, 8 spd., 2 hyd., 3 pt., 540 PTO, Case-IH 2255 hyd. loader, 7′ bucket, 16.6-30 rear tires, 1,614 hrs., S/N27722

1981 John Deere 4440, CAH, quad range, 3 hyd., 3 pt., 540/1000 PTO, 60 Series step, 18.4R38 hub duals, 12,419 hrs., engine has been overhauled, S/N050506RW

1979 John Deere 4440, CAH, quad range, 3 hyd., 3 pt., 540/1000 PTO, 18.4R38 singles, 12,823 hrs., engine has been overhauled, S/N017726R

 

COMBINE

2013 Case-IH 9230, axial flow, PRWD, Power Plus CVT, AFX rotor, luxury cab, leather w/buddy seat, deluxe controls, HD lateral tilt feeder house, Pro 700 display, 372 receiver w/Nav II controller, integrated auto steer, extended folding high cap. unloading auger w/pivoting spout, independent cross auger controls, 1-5/8” electric adjust sieves, 2 spd. elevator, power fold hopper ext., fine cut straw chopper, rock trap, HID lights, diff lock, heavy duty final drives, (2) sets concaves, HD rear axle, rear trailer hitch, on-board air compressor, Michelin 520/85R42 duals, Michelin 600/65R28 rear tires, 1,596 sep. hrs., 2,483 engine hrs., S/NYDG219851

 

HEADS

2014 MacDon FD75 flex draper head, 40′, Flex Float Technology, single knife drive, hyd. fore/aft, AHH, flip-over finger reel, poly, Case-IH AFX hookups, gauge wheels, slow spd. transport, S/N262144

2013 Case-IH 3020 flex head, 35′, single drive, AHH, TerraFlex torsion, finger reel, hyd. fore/aft, 3″ cut, poly, Case-IH AFX hookups, S/NYDH220043

2013 Case-IH 3020 flex head, 35′, single drive, AHH, TerraFlex torsion, finger reel, hyd. fore/aft, 3″ cut, poly, Case-IH AFX hookups, S/NYDH220195

1997 Case-IH 1015 pickup head, Melroe 388 pickup, 11′, single pt. hookups, converted to fit Flagship combines, S/NJJC0210102

1997 Case-IH 1015 pickup head, Melroe 388 pickup, 12′, single pt. hookups, converted to fit Flagship combines, S/NJJC0210717

1997 Case-IH 1015 pickup head, Melroe 395 pickup, 11′, 60-88 Series hookups, S/NJJC213230

1991 Case-IH 1010 pickup head, Pickett 13′ pickup, 8-bar, screen bottom, single pt. hookups, converted to fit Flagship combines, S/NJJC0123225

1991 Case-IH 1010 pickup head, 30′, (2) Elmers 14′ pickup, screen bottom, 60-88 Series hookups, S/NJJC124750

IHC 810 sunflower head, 22-1/2′, 12″ pans, 60-88 Series hookups, S/N37113

 

SWATHERS

Case-IH 8220 pull-type swather, 25′, finger reel, auto fold, wide throat, 540 PTO, S/NCFH0128772

(2) Case-IH 725 pull-type swathers, 25′, finger reel, auto fold, wide throat, 540 PTO, S/NCCC0003438, S/NCCC0002245

2002 MacDon 3020 pull-type swather, 25′, finger reel, auto fold, wide throat, 1000 PTO, S/N150391

IHC 4000 self-propelled swather, 18′, bat reel, Chrysler in-line 6 cyl., S/N1595

 

AIR SEEDER

2016 John Deere 1890 air seeder, 60′, 5-section fold, 10″ & 20″ space, MudSmith wheels across, full run monitor, John Deere 1910 tow-behind 2-compartment tank, 350 bu., section control, vari-rate control, hyd. fill conveyor, 520/85R42 duals, cart S/N1A81910HJFF765177, seeder S/N1A81890CEFH765182

 

SPRAYERS & SPRAYER TRAILER

2017 Case-IH 4440 self-propelled sprayer, deluxe cab, leather w/buddy seat, 120′ boom, 20″/30″ space, 1,200 gal. SS tank, AIM Command FLEX, 5-sensor AutoBoom height control, integrated auto steer, Raven Viper 4+ controller, receiver, rear camera system, fresh water tank, SS chemical inductor, 3″ front fill, fence row nozzles, traction control, hyd. tread adj., fenders, 380/90R46 tires, 1,000 hrs., S/NYHT045276

2009 Summers Ultimate NT, 100′ hyd. boom, 1,600 gal. poly tank, triple nozzle bodies, hyd. pump, foam markers, rinse tank, 3″ fill, adj. axles, 380/90R46 tires, S/NI0327

2002 Great Dane single axle dry van trailer, 28′, roll up door, spring susp., (2) 1,650 gal. poly tanks, Honda transfer pump, mix cone, 3″ plumbing, 11R22.5 tires on steel

 

TILLAGE EQUIPMENT

2013 Salford I-2100 vertical tillage, 41′, 8-wave blades, walking tandems across, weight pkg., 3-bar harrow, rolling baskets, 305/75R22.5 tires on main frame, S/N131498ML

2014 Degelman 7645 land roller, 45′, 36″ drums, rear fold, light pkg., S/NLR5771

2010 Wil-Rich QX2 field cultivator, 60′, 5-section fold, 7″ spacing, full floating hitch, double spring, edge-on shanks, 9″ knock-on sweeps, gauge wheels, flotation tire pkg., 4-bar harrow, S/N458712

IHC vibrashank cultivator, 30′, 3-section fold, walking tandems on main, 3-bar harrow

2000 John Deere 2400 chisel plow, 41′, spring standards, full floating hitch, walking tandems, HD 3-bar harrow, S/NN02400X000365

John Deere 1650 chisel plow, 41′, 12″ space, 3-section fold, walking tandems across, 3-bar harrow, NH3 nitrolator, carbide NH3 tips, rear hitch, Valmar 2055 granular applicator, ground drive, has original wings to make 60′” N01650X001146

Wishek 842T tandem disk, spring cushion gangs, 26′, 3-section fold, 11″ space, 24″ blades, scrapers, HD tandems across, S/N879526

Krause tandem disk, rock flex, 24′, 3-section fold, 8″ space, scrapers, tandems on main  

Case-IH 183 row crop cultivator, 3 pt., 16×30″, hyd. flat fold, vibrashank, (4) gauge wheels, rolling shields

 

SEMI TRACTORS

1989 Peterbilt 379 tandem axle day cab, Cat 3406B, 13 spd., air susp., engine brake, diff lock, single aluminum fuel tanks, 250″ WB, full poly fenders, aluminum headache rack, 11R22.5 tires, aluminum front & steel rear rims, shows 913,035 miles

1988 Peterbilt 379 tandem axle day cab, Cat 3406B, 15 spd., air susp., engine brake, diff lock, single aluminum fuel tanks, 247″ WB, poly 1/2 fenders, 11R24.5 tires on aluminum rims, shows 192,840 miles

 

BOX TRUCKS & TANKER TRUCKS

1994 Volvo WG64T tri-axle, air up/down rear tag axle w/duals, Cummins, 9 spd., engine brake, spring susp., Reiten aluminum 20’x72″ box, hoist, roll tarp, combo gate, electric gate opener, twin aluminum fuel tanks, 11R22.5 tires on steel rims, shows 622,230 miles

1986 Freightliner FLC tri-axle, air up/down rear tag axle w/duals, Cummins, 9 spd., engine brake, spring susp., Reiten aluminum 22’x68″ box, hoist, roll tarp, combo gate, electric gate opener, twin aluminum fuel tanks, 295/75R22.5 tires on steel rims, shows 642,807 miles

1983 Chevrolet C70 twin screw, 427 V8 gas, Eaton 5&2 spd., PTO, 19′ box, hoist, electric end gate opener, diff lock, 11R22.5 tires, shows 11,970 miles

1975 Chevrolet C65 tag tandem, 366 V8 gas, 5&2 spd., PTO, 18′ box, hoist, 10.00-20 tires, shows 99,445 miles

1970 Chevrolet C60 tag tandem, 327 V8 gas, 5&2 spd., PTO, 18′ box, hoist, 9.00-20 tires, shows 99,335 miles

1963 IHC 1600 single axle, gas, 4&2 spd., 15′ box, hoist, 9.00-20 tires, unknown miles, in good running condition

1990 IHC 9400 tandem axle tanker, 855 Cummins, 9 spd., diff lock, spring susp., 3,200 gal. SS insulated tanker, 285/75R24.5 tires on steel rims, shows 275,553 miles, used as a water tanker by the Aneta, ND fire department

 

HOPPER BOTTOM TRAILERS

2008 PLG tandem axle steel hopper bottom, 40’x96″x66″, ag hoppers, spring susp., electric roll tarp w/remote, 295/75R24.5 tires on steel rims

2007 Jet 40GT tandem axle steel hopper bottom, 40’x96″x66″, ag hoppers, spring susp., electric roll tarp w/remote, 11R24.5 on steel

1989 Timpte Super Hopper tandem axle aluminum hopper bottom, 42’x96″x78″, standard hoppers, spring susp., 2-spd. traps, electric roll tarp w/remote, 11R24.5 on steel

 

DROP DECK, IMPLEMENT & HEADER TRAILERS

1987 Fontaine tandem axle steel drop deck trailer, 48’x96″, air susp., sliding winches, no wood on deck, 255/70R22.5 tires on steel rims

Donahue tandem axle implement trailer, 30′, double square tube, hyd. jack

Donahue tandem axle implement trailer, 28′, double round tube

Lorack tandem axle implement trailer, 28′, single tube, hyd. lowering wheels & jack

Mattson tandem axle header trailer, 35′, flex bar

(2) Model Industries single axle header trailers, 30′

Shop-built single axle header trailer, 25′

 

NH3 EQUIPMENT

Nitromaster 8000 NH3 applicator, 52′, 5-section fold, 41 shanks, 16″ space, tandems across, rear hitch, hyd. nitrolator, S/N1089

(3) 1,000 gal. NH3 tanks on 4-wheel running gears

 

GRAIN HANDLING EQUIPMENT

2001 Westfield MK130-71 low pro swing hopper auger, 71’x13″, hyd. lift, 540 PTO, S/N135214

1993 Westfield MK130-71 swing hopper auger, 71’x13″, hyd. lift, 540 PTO, S/N62302

Feterl 1271 mechanical drive swing hopper auger, 71’x12″, hyd. lift, 540 PTO, S/N127086005

1996 Westfield WR100-61 load out auger, 61’x10″, 540 PTO, hyd. winch lift, on transport, S/N87295

Feterl 746 load out auger, 46’x7″, 5 hp, 1 phase, on transport, S/N93006G

2006 Brandt 735 load out auger, 35’x7″, Honda gas motor, on transport, S/N7766206

Aeration tubing

 

OTHER EQUIPMENT

Crown 410 fork-style rockpicker, offset hitch, hyd. dump

Woods pull-type rotary mower, 6′, 540 PTO, S/N1806

(3) Poly canola rollers, adj. hitch, transport wheels

Pallet forks, 48″ forks, fits Case-IH 2255 loader

Steel flatbed, 25’x102″, was mounted on truck for water tender

 

PICKUP

2001 Chevrolet 2500HD, ext. cab, 6.0L, automatic, 4WD, 6′ box, 247,704 miles, New transfer case

 

TIRES & PARTS

Goodyear set of (4) 520/85R38 tires on rims, fits 4440 sprayer

(2) Case-IH rear axles, spindles & tires, tires have fluid in them, off 2588 combine

Case-IH corn sieve out of 2588 combine

Asst. Case-IH concaves for 88 Series combine

Approx. (50) Yetter floating trash whippers for John Deere 1890 air drill, used on 50 acres

 

TIM BRAKKE

Scott Huso, 701.789.9800

or Brad Olstad at Steffes Group, 701.237.9173 or 701.238.0240

or Tadd Skaurud at Steffes Group, 701.237.9173 or 701.729.3644

---

Photo Gallery