Wick Construction will be selling their nice line of construction equipment. Most items were purchased new and are job site ready. Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment. For information contact Jeff, 701.490.0903, or John, 701.490.1461 at Wick Construction or Tadd Skaurud at Steffes, 701.237.9173 or 701.729.3644.

CONSTRUCTION RETIREMENT AUCTION

 

LOCATION:  1110 5^th Ave NW, Valley City, ND

 

AUCTIONEER’S NOTE:  Most items were purchased new and are job site ready. Major equipment begins selling at 10:00 AM.  Live online bidding available on major equipment. 

CRANES

1989 Grove RT 500C rough terrain crane, 4×4, Cummins 5.9L engine, cab w/heat, 22 ton block, 28 ton, 70′ boom, 26′ jib, hyd. outriggers, 20.5-25 tires, 6,065 hrs., S/N72454

1973 P&H T-180 crane, tandem axle, 5&4 spd., 18 ton, 15 ton block, 62′ hyd. boom, 15′ pull-out, 20′ jib, 425/65R22.5 front tires, 385/65R22.5 rear tires, boom & turret gone through at Titan Machinery in last year

1975 BMC deck crane, 45′ boom, 8 ton, 4WD, 4-wheel steer, inline 6 cyl. gas, 3-way steering, hyd. outriggers, 15′ jib, 15-19.5 tires

 

TELEHANDLERS

2002 Caterpillar TH63 telehandler, cab w/heat, radio, 4×4, 4-wheel steer, 6,000 lb. cap., diff lock, hyd. quick tach, hyd. leveler, hyd. outriggers, hyd. frame leveling, 74″ carriage, 48″ forks, fenders, rear counter weight, 6,108 hrs., S/N5WM06325

1997 Gehl 553 DynaLift telehandler, cab, heat, John Deere diesel, 4×4, 4-wheel, 6,000 lb. cap., quick tach 48″ forks, hyd. leveling, shows 761 hrs., S/NJN023651

Gehl bucket, 8′, quick tach, for Dynalift telehandler

 

WHEEL LOADERS & ATTACHMENTS

2005 Case 21E wheel loader, CAH, aux. hyd., hyd. quick tach, joystick control, 80″ bucket, 12.5/80R18 tires, 4,450 hrs., S/NHEC536509

2005 Case 521D wheel loader, CAH, ride control, aux. hyd., hyd. quick tach, radio, 2 yd., 8′ bucket, Titan 17.5R24 tires at 80%, 7,120 hrs., S/NJEE0137991

1996 Case 721B wheel loader, CAH, ride control, hyd. quick tach, aux. hyd., radio, rear weights, 102″ bucket, 20.5-25 tires, 11,755 hrs., S/NJEE0051040

Pallet forks, quick tach, 5′ carriage, 6″x42″ forks, for Case wheel loader

Pallet forks, quick tach, 5′ carriage, 3″x42″ forks, for Case wheel loader

 

DOZER

2004 Case 750K-WT dozer, CAH, powershift, radio, 10′ 6-way blade, 20″ tracks, 2,006 hrs., S/NCAL003100

 

EXCAVATORS & ATTACHMENTS

2009 Case CX210B excavator, CAH, radio, 48″ bucket w/frost teeth, 32″ tracks, 2,568 hrs., S/NDAC210K5N8SAH1779

2015 Bobcat 418 mini excavator, folding OROPS, aux. hyd., hyd. offset, hyd. push blade, hyd. adj. tracks, 12″ bucket w/frost teeth, 16″ ditching bucket, 7″ rubber tracks, 249 hrs., S/NB39211554

2015 Bobcat HB280 hyd. concrete breaker for mini excavator, S/NA5T501469

2008 Case CX36B mini excavator, OROPS, ZTS, aux. hyd., 66″ hyd. dozer blade, 24″ bucket, hyd. offset, 12″ rubber tracks, 2,544 hrs., S/NN7TN62344

Case excavator bucket w/frost teeth, 18″, fits CX36B mini excavator

Hyd. posthole auger, no bit, mounts on excavator arm

 

TRACTOR LOADER BACKHOE

2001 Case 580 Super M tractor loader backhoe, 4×4, ride control, 4 spd. w/LH reverser, extend-a-hoe, 30″ bucket w/frost teeth, 93″ bucket, 12-16.5 front tires, 19.5L-24 rear tires, 5,688 hrs., S/NJJG0279942

Backhoe bucket w/frost teeth, 18″, fits 580 backhoe

2007 Allied 75B hyd. concrete breaker, hyd. flat face couplers, rubber tire backhoe mounts, S/N248

 

LIFTS

1998 JLG 33RTS rough terrain scissor lift, 4×4, 14-1/2’x66″ max. platform size, 33′ max. platform height, 1,250 lb. max. cap., hyd. leveling, gas or LP, 5,625 hrs., 2 yrs. on New motor, S/N200044842

1999 JLG 450A boom lift, 4×4, 45′ max. height, 500 lb. max. platform cap., gas or LP, 33-15.5-16.5 tires, 4,118 hrs., S/N300038770

Genie GS1930 indoor electric manlift, 25’ max height, 500 lb. max weight cap.  

 

SEMI TRACTORS

2009 IHC ProStar tandem axle day cab, premium cab, Cummins ISX 450, Eaton 10 spd., air ride susp., air slide 5th, engine brake, diff lock, cruise, 2-line wet kit, dual aluminum fuel tank, poly 1/2 fenders, 186″ WB, 11R22.5 tires on (6) aluminum rims, 417,920 miles

1992 IHC 8300, day cab, N14 Cummins, 9 spd., air slide 5th, diff lock, 2-line wet kit, Safe-T-Pull, 168″ WB, 11R22.5 tires on aluminum rims, shows 195,823 miles

 

PUMPER TRUCK

1998 Mack tri-axle pumper truck, Mack diesel, MaxiTorque 9 spd., engine brake, cruise, 1998 Schwing 2023-4 KVM 32/28XL concrete pumper, 105′ boom, hyd. outriggers, air up/down pusher axle, 425/65R22.5 front tires, 11R22.5 rear tires, 255/70R22.5 pusher on all aluminum rims, 194,200 miles, 22,185 engine hrs., 4,617 pumper hrs.

 

DUMP TRUCKS

1987 IHC 2375 tandem axle dump truck, Cummins NTC, 9 spd., spring susp., diff lock, 15′ steel dump box & hoist, 11R24.5 tires on steel rims, 126,184 miles

1978 Chevrolet 70 tandem axle dump truck, 3208 Cat, automatic, spring ride, diff lock, Galion 15′ steel dump box & hoist, 10.00-20 tires, shows 129,010 miles

1977 Ford 9000 tandem axle dump truck, Cummins NTC 230, 5 spd. w/deep reduction, spring ride, diff lock, 15′ steel dump body & hoist, rear HD pintle hitch, 425/65R22.5 front tires, 11R22.5 rear tires, shows 373,969 miles

1975 Ford 8000 tandem axle dump truck, 3208 Cat, 13 spd., HD susp., diff lock, Beau-Roc 13-1/2′ steel dump box & hoist, 10.00-20 tires, shows, 6,755 hrs.

1978 IHC 1750 single axle dump truck, IHC diesel, automatic, Henderson 11′ steel dump box & hoist, 9.00-20 tires, 89,071 miles

 

SUPPORT TRUCKS

1974 Chevrolet C65 single axle flatbed, 8’x14′, 427 V8, 5&2 spd., air brakes, New treated wood deck, 1,000 gal. poly tank, Honda 2″ transfer pump, 1/2 hp. 110V water pump, asst. hose, shows 20,009 miles

2002 Isuzu NPR HD single axle cabover, spring susp., Isuzu diesel, automatic, 14’x7′ flatbed, wood deck, 1,000 gal. poly leg tank w/Honda 4 hp. motor, 2″” pump, 215/85R16 duals, 304,831 miles

 

TRAILERS

2011 Kaufman DT45 RGN tri-axle trailer, 48’x102″, spring susp., 24′ well, 15′ rear deck, 8′ neck, 16″ swing outriggers, 45 ton, 109,000 GVWR, Honda 13 hp. electric start pony motor, boom trough, covered wheel wells, 255/70R22.5 tires on steel rims

2015 CPS 45342AZ30 tri-axle side dump trailer, 42′ frame, 34′ tub, air ride susp., air scale, Aero Side Kick II electric roll tarp, full aluminum front fenders, poly rear fenders, rear push block, rear air up/down axle, 11R22.5 tires on all aluminum rims at 70%

1975 Arnie’s Welding tandem axle steel end dump, 22’x45″, spring susp., 11R22.5 tires at 70%, New paint & brakes, rebuilt suspension

2010 Load Trail tandem axle flatbed trailer, 7’x24′, 2′ beavertail, wood deck, flip-up ramps, 7,000 lb. axles, 2-5/16″ ball, 8-bolt hubs, 235/80R16 tires

2005 Load Trail tandem axle hyd. tilt-bed trailer, 20’x80″, 4′ stationary, 16′ tilt, steel deck, 12V self-contained hyd. pump, 2-5/16″ ball, 6-bolt hubs

2003 Stav tandem axle car trailer, 7’x16′, 12″ sides, wood deck, spring susp., slide-in ramps, 2″ ball

2006 Carry-On single axle utility trailer, 5’x8′, wood deck, mesh flip-up ramp w/Gorilla lift assist springs, 2″ ball, 5-bolt hubs

 

JOBSITE TRAILERS

Portable tandem axle jobsite trailer, 42’x10′, (2) room, front office, storage cabinets, 200 amp panel, propane furnace, lights & outlets, rear storage w/work bench

Portable bumper hitch jobsite trailer, 28’x10′, (2) rooms (office & tool storage), wired for lights, outlets, electric heaters, 100 amp service panel, workbench, storage bins, blue print desk, file cabinet, tandem axle trailer house axles, 8′ wood steps, steel siding, rubber roof, lockable steel doors  

Portable bumper hitch jobsite trailer, 28’x10′, (2) rooms (office & tool storage), wired for lights, outlets, electric heaters, 100 amp service panel, workbench, storage bins, blue print desk, file cabinet, tandem axle trailer house axles, 8′ wood steps, bumper hitch, steel siding, rubber roof, lockable steel doors  

Portable tandem axle jobsite trailer, 28’x10′, work bench, storage cabinets, windows, lights & outlets, rear door w/metal ramp

Wells Cargo portable tandem axle enclosed jobsite trailer, 24’x8′, spring susp., front office, curb door, wired for lights & outlets, rear door, rear storage

 

PICKUPS

2008 Ford F250 Super Duty, crew cab, 4-door, XLT, 5.4L V8 gas, automatic, 7′ box, nerf bars, tow pkg., lockout hubs, 275/70R18 tires on aluminum rims, 172,809 miles 2002 Ford F250 Super Duty, crew cab, 4-door, Lariat pkg., 7.3L Powerstroke diesel, automatic, 7′ box, aluminum toolbox, tonneau cover, nerf bars, tow pkg., lockout hubs, 265/75R16 tires on aluminum rims, 237,385 miles

1996 Ford F350 Super Duty, reg. cab, 7.3L Powerstroke diesel, 5 spd., 2WD, 10′ steel dump box w/hoist, removable wood sides, HD rear hitch, 235/85R16 duals, 142,695 miles

 

SKID STEER LOADERS & ATTACHMENTS

2012 Case TR270 track skid steer loader, CAH, ride control, hyd. quick tach, aux. hyd., ISO or H pattern joystick, radio, foot throttle control, 70″ bucket, 12″ tracks, 1,366 hrs., PIN#JAFTR270KCM458721, S/NNCM458721

2009 Mustang 2054 wheel skid steer loader, cab, door, heat, foot controls, manual quick tach, aux. hyd., 10-16.5 tires, 2,149 hrs., S/NMMCO2054P00009031

Bobcat smooth drum vibrating packer, 48″, flat face hyd. couplers, universal skid steer loader mounts, S/N803400211

ATI LB 556 skid steer loader box blade, 6′, hyd. adj., bolt-on cutting edge, laser/GPS mast, flat face hyd. couplers, universal skid steer loader mounts, S/N1077

Bobcat 2560 hyd. breaker, flat face hyd. couplers, universal skid steer loader mounts, S/N617900

Bobcat general purpose bucket, 60″, universal skid steer loader mounts

Bobcat pallet forks 48″ forks, universal skid steer loader mounts

Pallet forks, 42″ forks, universal skid steer loader mounts

Bobcat manure grapple, 72″, single cyl., flat face couplers, universal skid steer loader mounts

Bobcat 30C hyd. posthole auger, hyd. flat face couplers, universal skid steer loader mounts, S/N187605123

Bobcat auger bits: 36”, 18”

Auger bits: 14″, 24″, 30″

Erskine hyd. angle broom, 7′, flat face hyd. couplers, universal skid steer loader mounts, good brush, S/N1010505

Loegering Trail Blazer steel over the tire skid steer loader tracks w/(4) spacers Western snow plow, 7-1/2′ , hyd. angle, flat face hyd. couplers, universal skid steer mounts

 

FORKLIFT & ATTACHMENTS

Clark C500-25 warehouse forklift, ROPS, LP, 2,300 lb. cap., 42″ forks, solid tire, S/N2351713855

Shop-built heavy duty man basket, 4’x8′, fork pockets

Shop-built forklift boom, fork pockets, adj. reach

 

LASER EQUIPMENT

2014 Spectra Laser UL633 laser system w/HL750 receiver, carry case

2008 Spectra Laser LL500 laser system w/receiver, carry case

Apache 26 automatic blade control, 5MC receiver

Laser Alignment System LB10 laser system w/receiver, carry case

Laser Alignment System laser receiver, 360 degree, cab controls

Laser Plane L600 laser system w/receiver, carry case

Topcon GTS-2R digital transit

Topcon RL-H3CS rotating laser w/receiver, carry case

Craftsman transit w/carry case

DeWalt DW073 portable laser, cordless, ceiling grid, 18V w/charger, wall mounts, receiver, carry case

Asst. aluminum laser tripods & grade sticks  

 

CONCRETE LASER SCREED

2015 Ligchine Screed Saver Max, 35 hp. Kubota diesel, 12′ head, 16′ reach, remote control, (2) Spectra LR30 laser receivers & masts, 198 hrs., S/N1147

 

CONCRETE EQUIPMENT

Terex PB16A self-propelled power buggy, 16 cu. ft., hyd. dump bed, poly tub, Honda 13 hp. motor, S/NFVP18464

Morrison DB17P self-propelled power buggy, 16 cu. ft., poly hyd. dump tub, Honda GX390 motor, S/N106301

2004 Bomag BW124 PDH-3 sheepsfoot packer, Deutz diesel, hydro, 48″ front dozer blade, 48″ drum, OROPS w/canopy, shows 372 hrs., S/N901581281027

MBW Ground Pounder jumping jack packer, Honda GX100 motor

Wacker RT walk-behind sheepsfoot packer, double 32″ drum, Lombardini diesel motor, cordless remote

(4) Wacker 10″ packer wheels for walk-behind packer

2008 Multiquip MVH306GH self-propelled plate compactor, reversible, 28″x23″ pad, 672 lbs., S/NS5459

(3) MBW plate compactors

(2) Multiquip jumping jack packers, (1) w/motor, (1) without motor, for parts

 (3) Morrison std. screed powerheads, Honda motor, (1) 10′, (1) 17-1/2′, (1) 20′

(3) Morrison 10′ std. screed sections

(3) Morrison 5′ std. screed sections

(2) Morrison hyd. winch ends w/transport wheels

(2) Screed-O-Matic power screed heads, Honda motors

Edco CPM-8-9H walk-behind concrete floor scarifier, Honda GX 240 motor, S/N14364

Magnum Mini Mag walk-behind concrete saw, Honda 13 hp. motor

Arcet MC18 walk-behind concrete saw, 220V, 5 hp., 1 phase, electric motor

Max R515 cordless rebar tie gun, (2) batteries, charger, carry case

Max RB397 cordless rebar tie gun, (2) batteries, charger, carry case

Max RB650A cordless rebar tie gun, (2) batteries, charger, carry case

(3) MBW power trowels, 48″, (1) Honda motor, (2) Briggs & Stratton motors

MBW power trowel, 42″, Honda motor

Whiteman edging power trowel, 24″

Aerometals concrete bucket, 3 yd.

Concrete bucket, 1 yd.

Asst. hose & pneumatic jack hammers

Asst. form lumber: 2x4s, 2x6s, 2x12s

Asst. rebar: steel tie wire, steel studs & track, red iron, angle iron

Bosch 11245EUS rotary hammer drill, 110V, asst. bits & case

Brute jack hammer, 110V, w/asst. bits & cart

Hilti TE70 electric hammer drill, 110V, asst. bits & case

MK Manta concrete core drill, asst. sized drill bits

Symons concrete forms to include: (177) 24”x4’ panels, asst. 4’ filler panels & corners, 5’ panels & corners, (42) 24”x8’ panels & (8) 4” fillers, asst. whaler brackets, pins, scaffold brackets, turnbuckles & misc.

Dee steel concrete forms: (8) 6″x10′, (8) 12″x10′, (8) curved edge curb forms

1982 Shop-built tandem axle concrete form trailer, 6’x12′, spring susp., 6-bolt hubs

Shop-built concrete chute, fork pockets

(30) Concrete insulating blankets, 12’x20′

(15) Concrete insulating blankets, 10’x20′

(13) Concrete insulating blankets, 5’x20′

Pallet of steel concrete stakes  

Asst. concrete vibrators, 110v

Asst. concrete trowels, floats, handles, wall ties, anchors

 

LIGHT CONSTRUCTION EQUIPMENT

2008 Thawzall ground heater on single axle trailer, Beckett diesel fired boiler, 5-way manifold, hose reel w/hose, forklift pockets, 9,590 hrs., S/N12076AECG535

2011 Wacker Neuson LTN6 portable light tower, 6KVA 1 phase, Kohler diesel motor, 794 hrs., S/N5XFLNO512BN001068

Ingersoll Rand 175 trailer-mounted air compressor, 175 CFM, Deutz diesel motor, shows 318 hrs., S/N154377U86953

ICG OHV #500 construction heater, propane or natural gas, 450,000 BTU, 110V fan, indirect fired, S/N4110395PN

Hilti portable gas air compressor, Honda 11 hp. electric start motor, 80 gal. tank, 2 cyl. compressor, w/(2) R4X12 nail guns, pneumatic tires & handle kit

Partner HP40 Mark II portable hyd. power unit, Vanguard 16 hp. gas motor, w/Partner K3600 ring saw & (2) chain saws

Knaack jobsite toolbox, 2’x5′

Ridgid cordless inspection camera

 

OTHER EQUIPMENT

Kolberg 224-50 gravel screeners, 50′, Isuzu 4 cyl. diesel, asst. screens, hyd. lift, 10:00-20 transport tires, S/NS014-224-50-85

Portable gravel screener, 4’x6′, 79cc gas motor, forklift pockets

Woods MD160 rotary mower, 5′, 3 pt., 540 PTO, single tail wheel

Pull-type single gang disc, 10′, adj. angle

Posthole auger, 2-man, 7″ bit, Briggs & Stratton 5 hp. motor

 (2) Fiberglass man buckets, off bucket truck

 

SCAFFOLDING

 (45) 5’x5′ scaffold uprights w/cross braces

(8) 5’x2′ scaffold sections

(4) 3’x2′ scaffold sections   

(6) 5’x2′ scaffold guard rail sections

(4) Werner aluminum scaffold planks, 7’x19″

Asst. caster wheels, jacks & feet for scaffolding

 

GENERATORS & SHOP EQUIPMENT

Honda EB 6500X portable generator, 6,500 watt, wheel kit

Honda EU 2000I portable generator

Honda EB 3000 portable generator, 3,000 watt

(2) Honda EW171 portable welder/generators, gas powered, auto throttle, handle & wheel kit

(2) Hilectric (2) portable generators, gas Wisconsin motors, 3 phase, 2/1 KW, 120v

Hobart Airforce 500I plasma cutter, 115/230V, 27 amp output

Miller Millermatic 211 wire welder, 120/130v, auto-set w/MVP, .035 wire, rolling cart, no tank, S/NMF031367N

Lincoln 225 AC/DC stick welder w/leader

R&D parts washer on stand, 110v pump

Rhino hot water pressure washer, 5 hp., 1 phase, 220v, fuel oil fired, New pump

Buds Service 4-compartment oil bar, (2) 120 gal., (2) 70 gal. storage compartment

(2) Husqvarna K760 gas cut-off saws, abrasive bits

Jet HVBS-7M horizontal metal band saw, 3/4 hp. 1 phase, liquid coolant pump

Carolina HD10 horizontal metal band saw, on rolling cart, S/NHD1017965

Cat electric pallet jack w/charger, No battery

Chicago electric sliding miter saw on portable stand

DeWalt sliding miter saw, 12″

(2) DeWalt compound miter saws, 12″

DeWalt radial arm saw on stand, 110v

Cherry picker  

Emglo AirMate air compressor, 6 gal.

Husqvarna 440 chainsaw, 16″ bar

Husqvarna 460 Rancher chainsaw, 26″ bar

Lanair CA200C waste oil or fuel oil furnace, approx. 100 gal. tank

(3) Maverick LP jobsite furnaces

(5) Paslode cordless framing nailers

Rockwell 10 contractor table saw, 10″, 110v, on stand

Rockwell 10″ table saw, adj. fence w/stand

Sears 30 gal. air compressor, 4 hp., 110v

Sears band saw on stand

Snap-on 393 torque multiplier

Telpro cabinet lift, 300 lb. cap., nylon strap winch

Valustar chain hoist, 1 ton, 110v

(2) Countryline 42″ shop fans, 110v

Asst. oxyacetylene torch sets

Asst. bar clamps, T-squares, levels

Portable propane heaters & furnaces

(2) Lincoln cordless grease guns w/batteries & charger, carry case

Asst. mop buckets, fans, space heaters, lights  

Asst. electrical cords, welding heads, extension cords

Asst. caulking guns, hyd. bottle jacks, clevises & pins

Asst. metal chop saws, power drills, screw guns, fiberglass ladders, dollies, safety equipment, hand tools, wrenches  

Asst. hardware, fasteners, nails, screws, brackets, nuts, bolts, plastic, tarps  

Asst. propane hose, torches, tanks  

Asst. shovels, scrapers, brooms, etc.

Asst. handheld cut off saws, 110v

Asst. air nailers, grinders, shears, sanders, routers, saws, hammer drills, drills, sawzalls

Ridgid & Ryobi planers, 110v

Panel lift, sheet rock lift

 

SUPPORT ITEMS & MISC.

Delta “L” shape fuel service tank, 105 gal., Fill-Rite pump, 15 gpm, 12v  

Steel fuel service tank, 50 gal., Fill-Rite pump, 15 gpm, 12v  

250 gal. propane tank

Gorman Rupp aluminum water pump, 3″, 3 hp. Briggs & Stratton motor

Asst. cable chokers & lifting slings  

Asst. jobsite temporary lighting  

HD machinery mover dollies

(10) Wheelbarrows

Asst. chain link fence & posts, road signs, barricades & fence posts

Asst. cable, water hose

Maytag Neptune electric washer & dryer

Star popcorn maker on cart

 

WICK CONSTRUCTION

Jeff, 701.490.0903, or John, 701.490.1461

or Tadd Skaurud at Steffes, 701.237.9173 or 701.729.3644

Photo Gallery