4 May, 2024 3:07 pm
Location: Leeds, ND – 1 mile west of Leeds, ND on the south side of Hwy 2
9. Dan Olson – Cando, ND – 701-303-0150
– 9610 JD combine, 3502 sep. hrs., 4970 eng. hrs.
– 30’ JD 930 flex head w/ finger reel on transport, new wobble box
– JD 212 header, Melroe pickup with rubber drapers
– 1983 Peterbuilt, tri axle cab over truck, 20’ box, electric roll tarp, Cummins 855 cubic engine, 12 speed Roadranger transmission
– 1985 S-20 IH truck, 20’ Reiten aluminum box, 7 speed transmission, roll top tarp, Cummins 855 cubic engine
– 1985 Chevy C60 single axle truck, roll tarp, 16’ box, 2 speed axle
– 9280 Ford Versatile tractor, 5995 hrs, 20.8 tires, 4 hyd.
– 4650 JD tractor, 8900 hrs, 15 speed power shift, 1000 rpm, P.T.O., 3 pt hitch, 3 hyd. with 4 add on hyd. for the sprayer, 14.9 46 duals, also 4 tires and rims 20.8 (25% rubber), easy guide, #250 auto steer
– 82’ shop built tractor sprayer, auto rate controller, 750 gal tank, nozzle bodies with three spray tips, hyd. folding booms, 30 gal rinse tank, hyd. drive pump
– 33’ Flexicoil air seeder with markers, 7.5” spacing, 1720 tank
– 41.5ft IH vibra chisel cultivator with Degelman harrows
– 38’ WilRich chisel plow, w/ harrows, NH3 nytrolator with vertical dam manifolds
– 38’ WilRich chisel plow w/ harrows
– 2 yard Eversman earth mover
– Cenex 13×50 auger with swing away hyd drive.
– Rem 1026 grain vac, 1000 rpm P.T.O.
– IH row cycle planter #400
– 1965 Ford F600 flatbed truck with hoist, rebuilt engine (less than 1,000 mils), runs good, needs brakes
10. Tim Krueger – Egeland, ND – 701-230-1821 or 701-266-5350
– 1984 IHC model 1480 combine, S# 17202344054132, 466 engine, rock trap, hyd. reverser, chaff spreader, 13’ pu head with 10’ McCoy-Rinn pickup, 24.5×32 front, 13.50×16 rear, tires good, always stored inside
– 1992 25’ model 1010 straight head with pickup reel, fore + aft, S# JJCD125620, excellent cond,
– 45’ WilRich 2500 cultivator with Wilrich harrows
– Grain trailer, shop built on truck frame and axles, steel box, 7’ wide, 13’ 6” long, 48” high, center swing out end gate, P.T.O. hoist
– Grain trailer, shop built on truck frame, tandem duals, steel box, 7’ 6” wide, 18’ long, 56” sides, center swing out end gate, Shur-lock roll tarp, hyd. drive for hoist, hyd. cylinder to lift hitch for hooking up to tractor, 8.25×29 tires (good)
– 20’ WilRich chisel plow with Morris harrows, hitch that extends for anhydrous tank hookup
– 1979 IH truck model F1954, twin screw, 13 speed trans., newer 466 diesel engine, steel box – 20’X 7’ 10”, center swing out end gate, Pro-lock roll tarp, 11R22.5 14PR rears, 10.00×20 front, tires good, shedded
– 100 gal service tank (75 gal + 25 gal), nearly new 12V pumps, has tool box on top
– 70 U steel fence posts, 6 ft
– 110 T steel fence posts, 5 ½ ft
– Wood corner posts, 8 ft and 10 ft
– 5 spools electric fence wire
11. Steve & Don Neameyer – Mylo, ND – 701-739-7557
– 9680 Ford New Holland 4wd tractor 360 hp, 20.8 42’s, 4 hyd, plumbed for air seeder, good tractor
– 43’ JD model 680 chisel plow w/3 bar harrow, shovels & harrow teeth almost new, excellent shape
– 25’ model 8220 Case IH pull type swather w/ finger reel, shedded, good shape
– 1969 Chevy C-50 single axle grain truck, 350 gas w/ fresh overhaul, 4+2, steel box & hoist
– 1979 Ford F-800 single axle grain truck, roll tarp, steel box & hoist, 3 piece gate, box & hoist excellent, otherwise truck not in very good shape
– 3pt 7’ snow blower w/ hyd chute, smaller blower, single auger
– P.T.O. 6” water pump, 30’ suck hose, 180’ discharge
– Dozer blade, came off of 4430, 4630 JD, would fit others, w/ hardware blade for 4 wheeler, came off of Polaris
– Hutch C-1600 rotary screen grain cleaner, electric motor drive
12. Gaylen Halstensgaard – York, ND – 701-680-8120
– Degelman reel type rock picker, ground drive
– 54’ Summers 4 bar harrow
– 26’ IH model 645 vibra chisel, 2 bar harrows
13. Brady Peterson – Rock Lake, ND – 701-230-2586
– 25’ 925 JD straight header w/ transport, trailer sells separate
– 1995 Chevy pickup, 4×4, regular cab, long box, 106,000 miles, one year on transmission
– 25’ Premier pull type swather
14. Nyle Myrhe – Sheyenne, ND – 701-302-0747
– 18 ½’ International vibra shank field cultivator, good straight unit
– UST hay feeder wagon on wheels, 9’x22’ long
– Dual loader utility loader for tractor, SN.C20751
15. Burt Westlind – Bisbee, ND – 701-968-3146
– Hesston 4800 square baler
– MH model 1560 round baler
– 9×40 3 axle trailer house trailer for bales
16. Glen Slaubaugh – Rugby, ND – 701-771-0079
– 2014 53’ Maurer triple axle semi-trailer, dove tail, flip out ramps, sliding winches, oak wood deck w/ fresh oil, spare tire, less than 5,000 total miles since new, excellent cond. No front or side racks go with the trailer.
– 2006 Ford F350 4wd 4 door long box pickup, automatic trans., brand new ranch hand bumper, 75% tires, 6.0 liter diesel w/ all updates including EGR delete kit, fuel pressure reg. upgrade, brand new upgraded head bolts & gaskets, oil cooler, etc. new gooseneck ball hitch not installed, brand new running boards
– 31’ JD 1610 chisel plow, 3 bar Summers Harrow
– 1998 Polaris 500 4wd four wheeler, w/ winch
– 2009 Polaris 500 4wd four wheeler w/ winch, has 5,000 miles
– JD 740 bucket w/ quick tach
– Highline model 6600 Bale-Pro bale processor
17. Robert Brown – Harvey, ND – 701-324-4088 or 701-341-7309
– Rowse double nine sickle mower, approx. 5 years old, two extra sickles, brand new guards, new bearings etc., excellent cond., retired from cattle
18. Towner County Weed Board/ Bill Harkness – 701-351-0149
– 1979 GMC water truck, 3500 gal. tank, 366, good truck
19. Gaylon Sieler – Cando, ND – 701-230-1985
– 40’ WilRich field cultivator, complete walking tandems, good 4 bar harrow
20. Lamar Martz – Cando, ND – 701-370-1023
– Versatile 400 self-propelled swather
– JD 5 bottom 5-16 plow
– JD 6 bottom 6-16 plow, series 3100
– Smith roll bean sweep, 1 hp elec. motor
21. Paul Johnson – Bisbee, ND – 701-477-4242
– 1994 Flexicoil 1720 air seeder w/ 33’ model 5000 seeding tool, 2 bar harrows, rubber packer wheels, Flexicoil adj. boots w/ knock on shovels, extra fine roller for canola, also fine & coarse, super clean machine
22. Brock Schill – Langdon, ND – 701-370-3465
– JD model 567 round baler, gathering wheels, mega teeth on pickup, good belts, shedded, less than 10,000 bales on machine, has kicker
– 17’ Carlson Glastron boat w/ Chevy inboard motor and trailer
– 70’ Herman 5 bar harrow w/ pressure springs, tandem flotation tires on front, 80% teeth
23. Lance Schill – Langdon, ND – 701-305-0464
– JD model 566 round baler, one owner, 6,500 total bales on machine, new belts, bale kicker, gathering wheels, exc. cond.
– 1989 Titanal II JD 8820 combine, straddle duals, 2430 engine hours, always shedded, never combined anything except wheat, barley and canola, highly maintained always
– JD 914 pickup head, always shedded, very good cond.
24. & 25. Mike Hakanson – Maddock, ND – 701-341-0470
– 70’ Bourgault harrow
– 2006 Brandt model 5000 grain vac
– 1994 Wilson 43’x78’ hopper bottom semi trailer
– 1996 45’x96’ aluminum Wilson flatbed semi trailer
– JD model 893 8×30 corn head, early 2000’s yr
– 1999 JD model 930 flex head w/ finger reel
– JD model 912 pickup head
– 1995 JD 9600 combine, 6760 engine hrs, 4732 sep. hrs
– 2010 45’ Degelman land roller
– 2003 F-450 Ford service pickup, has 11’ service body, V-10 gas, 6 speed, manual
26. Dave & Kyle Bohl – Wolford, ND – 701-208-0806
– 2004 7420 JD MFD tractor, has JD 741 loader, arena 6 tine grapple, 7,800 hrs, factory 3pt, 3 hyd., 18.4 42’s tires, (appox. 40%), near new fronts, excellent over all, well maintained tractor
– Early 80’s 6×20 gooseneck WW tandem axle stock trailer
– 2008 New Holland model 1475 hay conditioner, has 16’ and 2300 HS head, this machine was recently extensively gone thought & used 50 hrs since, it was bought new as a two year carry over so it was not used at all the first two years, it is in over-all excellent condition.
27. Wayne Slaubaugh, Tri S Farms – Wolford, ND – 701-771-2408
– 1450 gal double NH3 tanks, Duo Lift trailer, double fill, 21.5Lx16.1 SL tires, excellent shape
– 1450 gal double NH3 tanks, P&H trailer, double fill, 16.5Lx16.1 SL tires, excellent shape
– 1450 gal single NH3 tank, Demco trailer, 4 like new 14Lx16.1 SL tires, good shape
– 2013 48’ Gates coulter disk series 2, excellent cond.
28. Warren Anderson – Rolette, ND – 701-246-3891
– IHC H narrow front tractor, 2 hyd., P.T.O., good tires (90%), parade ready with a paint job
29. Bruce Kitsch – Webster, ND – 701-395-4422
– 16 row model 1770 conservation till planter, dry fertilizer, 30” space, well maintained, stored inside most of its life
30. John Duchsherer – Minot, ND – 701-240-3842
– 2002 45’ 5000 Flexicoil air seeder, 650 trip, rubber press w/ drags, 9” space, 2320 tow behind tank, two rollers fine & course, 89 bu. fert., 140 bu. grain, double fold, super clean, looks like new, field ready
31. Dale Pfeifer – Esmond, ND – 701-341-1310
– JD 24T square baler
– 9’ Rowse sickle mower, used very little
– BJM 757 feeder mixer box
32. Lawrence Mattern – Rugby, ND – 701-771-2035
– 2004 JD 9760 combine, Contour Master, Big Top hopper topper, 3250 sep. hours, just spent $25,000 in parts alone, super clean, shedded machine.
– 1990 Kenworth T-400 day cab, L-10 Cummins, 9 speed, diff lock, 11R 22.5 tires
– JD 212 pickup head, has big tires
– 1000 gal NH3 tank and gear
– Westfield 10×70 auger w/ mechanical drive swing out hopper
– 1983 Ford L9000 truck w/ gravel box, 3406 Cat, 9 speed trans., steerable pusher axle, twin screw
– 9 wheel hay rake
33. David Hoffert – Rugby, ND – 701-583-2549
– 1994 1688 Case IH combine w/ 1010 Case IH pickup head, 5,800 engine hours
– Parker gravity wagon w/ hyd. auger extensions & factory running gear
34. Roy Kenner – Devils Lake, ND – 701-351-1013
– (4) Toyota Highlander 245 /R19 car tires (20%)
– (2) 20.8×38 tractor tires on white rims, (20%)
– (2) 24.5×32 tires, (20%)
– 16 gal. shop vac, runs well
– (30) 10” knock-on McKay field cultivator shovels
– 3500 watt gas generator
35. Mark Krebsbach – Oberon, ND – 701-303-0451
– 6’ 3pt King Kutter finishing mower, like new
– 6’ 3pt King Kutter box blade, like new
– 7’ 3pt King Kutter blade, manual swivel, like new
36. Penny Krumwiede – Sarles, ND – 701-697-5155
– 7’ 3pt finish mower
– 8’ canola roller
– Prong type rock picker, factory built, double cylinder
37. Dick Huffman – Minnewaukan, ND – 701-473-2570 or 701-595-1432
– Case IH model 1250 16 row 30” planter, set up with liquid fert., approx. 2012, low acres, shedded, exc. cond.
– 1996 Ford New Holland 8870 MFD tractor, factory 3pt hyd., approx. 6500 hrs, has Allied 795 loader w/ grapple, good loader, decent shape
38. Rick Casavant – Rolette, ND – 701-244-5705 or 701-550-9553
– High Heavy Hitter Wheat Heart post pounder, trailer type, P.T.O. pump, stored inside, excellent shape
– 5 tube Kwik Kleen, has cleaning auger, one set of screens (wheat/ barley), stored inside, clean machine
– 16’ car trailer, really good bed and ramps
– Business man radios, four radios plus base station w /radio
– Smith Rolls drag auger w/ elec. motor
– Foam marker from 90’ sprayer
– 30’ JD bat reel for JD header, excellent shape
39. Duane Pfeifer – Devils Lake, ND – 701-393-4338
– Allies Chalmers WD45 tractor, SN: WD-235824, new back tires, engine overhauled about 8 years ago, good shape
– 6’ Woods belly mower, came off of Allies Chalmers WD45 tractor
– Bobcat 500 skid steer loader, 24HP Kohler engine, runs, decent shape
– Forney model C-3 welder, 180 amp, comes w/ cables, good shape
40. Gary Heller – Munich, ND – 701-370-8997 or 701-866-8315
– Summers 90’ pull type sprayer, 1000 gallon tank, 200 gallon auxiliary tank & mixing cone, 2 new sets of nozzles, new pump and orbit motor
– 1997 39’ Flexicoil air seeder, 2320 double shoot tank, 5000 seeder 7.2 spacing, 1000 acres on 1 ½” Adam jet hard surface openers
– Degelman reel type rock picker, P.T.O. drive
41. Randy Simon – Oberon, ND – 701-351-4196
– 9’ Rowse sickle mower w/ New Holland head, nice
– 25’ Macdon premier P.T. swather w/ finger reel
– (2) 1974 D-600 Dodge grain truck w/ boxes, hoists & roll tarps
– Pallet of NH3 knives
– Pallet of air hoods for top of grain bin
– 8’ canola roller, steel drum
42. Alois (Sony) Schmidhammer – Cando, ND – 701-351-2782 or 701-968-3802
– 1996 New Holland 9882 four wheel drive tractor, 12 speed transmission, 4 hyd., 750/65-38 Trelleborg duals (80 + %), 4925 hrs, always shedded
– 2008 Case IH 2588 AFS combine, duals, rock trap chopper, AFX rotor, hopper extension, 1183 engine hrs, 735 sep hrs, Pro 600 monitor, auto lube system, bought brand new, always shedded
– Case IH 1015 7 belt pickup header
– 30’ Case IH 1020 flex header w/ finger reel
– 30’ Moller header transport
– 73’ Summers 2pt sprayer w/ triple nozzles, foam marker
– 36’ JD 787 air seeder w/ 730 air disk drill
– 1985 Ford FT 800 tandem twin screw truck, 3208 Cat, 10 speed, 20’ box w/ head lift hoist, roll tarp, 273,600 miles, 30,000 miles on engine
– 41’ Saturn chisel plow w/ anhydrous app., John Blue w/ hyd. shut off, 3 bar harrow
43. Mike Olson – Mcville, ND – 701-230-9795
– 1,000 gal. water tank, steel tank, painted up nice, not rusted, plumbed for automatic
44. Duane Bauerly – Harvey, ND – 701-340-1970
– JD 3010 2wd tractor, gas, 8 speed Syncro, tires at least 50%, factory 3pt, 540 P.T.O.
– Model 238 Farmhand loader w/ grapple, JD brackets, heavy duty loader, not welded up, good shape
45. Dan Webster – Penn, ND – 701-739-6122 or 701-393-4328
– 8 roll 8 bar bean picket
– 16 roll Case IH 30” row crop cultivator
– 45’ Wilrich cultivator
– 1975 850 Versatile 4wd tractor, 18.4×38 tires, 2,621 hrs on new engine
– 1975 850 Versatile 4wd tractor, 20.8×38 tires, 7,820 hrs
– 500 gal. fuel tank w/ pump
– Set of 4 Tridekon dividers for sprayer, JD 30 series
– Rock picker, prong type
– (12) Businessman radios, GMR frequency
46. Doug Dulmage – Leeds, ND – 701-351-2637
– Convey-All model 1085 conveyor 85'
– Friesen model TC 1030 conveyor 30'
– Eversman model 2SD scraper
– "L" shaped pickup fuel tank
– 1987 26’ Champion camper
47. From Devils Lake, ND – 701-351-7119
– 1978 Ford dump truck, new tires
– JD backhoe loader
– (4) 1000-20 & (4) 900-20 truck tires
– (4) 18.4×38 tractor tires
48. Paul Juntunen, Rolla, ND – 701-550-9295
– 2000 Flexicoil 67 sprayer, 1000 gal tank, 114’ booms
49. Lester Roberts, Oberon, ND – 701-798-2666
– 1968 IHC 1800 truck, full tandem, box, hoist and roll tarp
50. Cando Farmers Grain & Oil , Cando, ND 701-303-0780
– (2) Chassis for NH3 twin tanks
– (3) Chassis for 1450 single tanks
51. Loren Haagenson – Leeds, ND – 701-739-7729
– 9370 Case IH 4wd tractor, 4 hyd., 24.5 32 duals, 12 speed manual transmission, recent injector pump, transmission & clutch within last 1000 hrs, has 9380 specs, 8200 hrs
– 5 tube hydraulic drive Kwik Kleen
– 41’ Case IH model 5600 chisel plow
– 1994 Chevy 1 ton dually 3500 service pickup, full service body w/ 400 gal fuel tank & elec. pump
– 10” Westfield hyd. drive jump auger
52. Jeff Halverson – Rugby, ND – 701-208-0296 or 701-776-5997
– 35’ Case IH chisel plow w/ 16” brand new sweeps, 3 bar Degelman harrows
– 28’ Krause tandem disk
– 35’ Morris model CP-31 chisel plow w/ John Blue hyd. NH3, good knives, very good 3 bar harrows
– 10,000 Bu. storage ring
– 18,000 Bu. storage ring, 2 ring high
– (4) 24’x64” free standing coral panels
– 26’x64” free standing coral panels
– 20’x64” free standing coral panels
– 14’x64” free standing coral panels
– (6) 18’ slant bar cattle feeders
53. Roger Held – Egeland, ND – 701-370-8874
– 25’ 590 JD swather w/ bat reel
– 212 JD header w/ 6 belt JD pickup
– Thermal Arc model 161-5 welder inverter brand new in box
– 35 lbs 5/8 X 3 ½” grade 8 bolts
54. Lee Myklebust – Starkweather, ND – 701-351-8686
– JD 777 air seeder w/ 1060 seeding tool
– MacDon 5000 hay conditioner
55. Tim Sager – Cando, ND – 701-741-2246
– 1983 945 Versatile 4wd tractor, 9810 hours, 20.8-38 tires, plumbed for air seeder, exceptionally well maintained, very nice inside cab, etc.
– 70’ 4 bar Western harrow
56. Wallace “Wally” Bisbee – York, ND – 701-351-3172
– 666 IHC tractor, working TA, 3pt, P.T.O., 2 hyd., new tires
– Westfield 31×10” w/ 22 HP twin cylinder gas
57. Dave Lagein – Rock Lake, ND – 701-370-8826
– JD 5020 tractor, no cab, 18.4-38 duals (average tires), 021527R, 10,275 hrs, 1500 on major
– JD 3950 chopper, E03950X985035
– (4) Good Year DT 710 20.8 R42 tires, average tires
– 14Lx16.1 tractor tires
– (4) 23.1×26 on 12 bolt rims
58. Dave Steinbach – New Rockford, ND – 701-302-0086
– 1994 39’ 5000 2320 tow between cart, 9” spacing, less than 3000 acres on new openers, rubber press, 550 trip
– Hydraulic driven winch for NH3 tanks for hooking up
59. Damian Dionne – Rolette, ND – 701-228-4163
– (2) 30’ bottomless Canadian made cattle feed bunks, heavy duty commercial
– (2) 20’ bottomless Canadian made cattle feed bunks, heavy duty commercial
60. Roger Rance – Cando, ND – 701-739-7447
– 33’ Flexicoil air seeder (tool only), 7.2” spacing, eagle beak point, good steel press wheels, have been capped, good shape
61. Owen Goeser – Devils Lake, ND – 701-370-2221
– 1944 JD B narrow front tractor, SN. 172813, runs good, recent mag. & carb, 10-38 rears, good paint, straight, etc.
– Trailer of misc. small items, farm items, etc.
62. Smith Equipment Consolidated, Inc. – Knapp – 715-665-2000
NEW SKID STEER ATTACHMENTS (ALL UNUSED W/ QUICK ATTACH)
– Stout brush grapple 66-9
– Stout brush grapple HD72-4 close-tine
– Stout brush grapple XHD 84-6
– Stout rock bucket grapple 72-3
– Stout rock bucket/brush grapple combo HD72-3 open-end
– Stout material bucket 84" w/ double-cut edge
– Stout tree & post puller
– Stout receiver hitch plate
– Stout solid weld-on skid steer plate
– Stout walk-through pallet forks 48"
– Stout full-back pallet forks 48"
– 48” Regular pallet forks
– Stout bale spear-round
– (4 tires sell as one lot) Maxam 12-16.5 skid steer tire 12-ply
63. Corey Ohma – Devils Lake, ND – 701-739-9290
– 1961 JD 4010 tractor, rear tires are new, dual hyd’s., 12 V system
64. Darrell Odegaard – Egeland, ND – 701-230-1613
– Skid mount sprayer w/ 150 gal tank w/ 100’ hose on reel, Honda engine, roller pump, mounted on p/u box
65. Richard Wangler – Rugby, ND – 701-208-1780
– 1961 GMC truck, roll tarp
– 16’ field cultivator
– 22’ gooseneck trailer
– Misc. small items
66. Louis Schaefer – New Rockford, ND – 701-302-0342 or 701-652-5304 (Mike)
– (4) Michelin 17.5 R 25 XTLA radial tires, 10 ply, less than half
– Quonset auger system, 120 total ft., U-trough, 8’ sections, 8” diameter, used very little, exc. condition
– Brandt 7”x35’ auger w/ 20 hp Honda elec. start gas motor, very good cond.
– Westfield FT 10”x36’ w/ low profile hopper, 10 hp elec. motor, very good cond.
– Batco 13”x45’ Convey-all conveyor, 20 hp Honda elec. start gas engine, shedded, very good cond.
67. Other Quality Equipment
– Case IH MX 220 MFD tractor, factory 3pt w/ Jiffy hitch, 7,500 hrs
– Wilmar model 500 dry fertilizer spreader, P.T.O., twin fans, tandem axle w/ flotation tires, nice shape
– 1986 Chevy Silverado ½ ton 2wd pickup, regular cab, long box, 6.12 diesel, automatic trans., engine has less than 100,000 miles
68. Local consignor
– (2) 8’ brand new full size pickup boxes, (white) fits 1994, (red) fits 2000
69. Gerald Christenson – Bottineau, ND – 701-228-2739
– 1971 Chevy C60 tandem grain truck, 427 engine, dual tanks, approx. 18’ box
– 8’ canola roller
– (3) 300 gal fuel tanks w/ stands
70. Jim Sanders – Calio, ND – 701-370-6236
– 8430 JD tractor, has 12’ blade, 3pt, P.T.O., 9260 hrs
– 2002 Dodge Ram, long box, ¾ ton., 5.9 Cummins, approx.. 180,000 miles
– 2003 Chevy Avalanche, 6 in lift, 35” tires, after market hood, 140,000 miles
– Farm hand 5 bale mower
71. Loren Knutson – Leeds, ND – 701-466-2041
– Summers 3pt sprayer, 66’ booms, 300 gal tank, foam marker
– JD 9350 press drills (3) 8’ sections, 24’ total w/ drive on transport
– New Holland side delivery rake
72. Jeff Kenner – Devils Lake, ND – 701-740-5673
– 1270 Case 2wd tractor w/ model 125 EZ-ON loader w/ quick tach & pallet forks, power shift, 7780 hrs
– 2001 semi trailer w/ hyd. lift gate, has various enclosed compartments
– 1991 F-350 tire changing truck, 20,000 miles on new 7.3 diesel & clutch
– 2566 IHC industrial gas 2wd tractor, cab, jobber 3pt, 8632 hrs
– Ditch witch model R65 4wd trencher w/ front back-hoe & pusher blade
– (9) 24.5 semi tires on aluminum rims
– Pickup tool boxes
– (2) 14Lx16 tractor tires, 8 bolt rims
– JD model 590 pull type swather
– Dakon 12’ forage dump wagon
– 570 Toxowic grain dryer, has new tires
– (2) tire changing machines, air operated
– Triaxle skid steer trailer, shop built
– Sears Craftsman 7000 Watt generator
– 3pt P.T.O. driven rod weeder
– High line pole hauling dolly
– Older boat, motor & trailer
– Small pickup box topper w/ tool box sides
– (4) 23.1×26 tires on 8 lug rims
– (2) 11:00 16 6 hole tractor tires
– Brand new fuel tank, approx. 1000 gal
– Gas or diesel pump hoses w/ auto shut-off nozzles from gas station
– Peerless model 500 mill & mix roller mill
– (6) 8.25×20 radial truck tires on rims
– Several 18.4×38 tractor tires, decent tread
– (2) drill presses, one bench top, one floor model
– (2) 5000 gal propane tanks
– Century ac/dc welder
– Pull behind blade/ ditcher
– Pickup service tank w/ 12 V pump and tool box
– 10’ Hay buster no till drill
73. Tony Gallow – Bisbee, ND – 701-799-4212
– 66’ Summers super sprayer w/ 750 gal tank, foam markers, wind screens, 3 way nozzles, has all controls, monitor, etc.
74. Scott Senger – Rugby, ND – 701-542-2560
– 36’ Rouse dump rake
– Set of front suitcase weights for International tractor
75. Gary Johnson Estate – Cando, ND – 701-330-7013
– 1982 Chevy flatbed dually pickup, 1 ton, has hyd. dump box, short removable sides, 454 engine, 4:10 gears, 3 speed stick shift, excellent, shedded
– 1985 Ford LTL 900 tandem twin screw grain truck, 855 Cummins big cam series 3 (400 HP), 22 ½ Midland grain box, brand new roll tarp, all new glass, 13 speed Fuller trans., head lift hoist, rear controls for box, has automatic opener for end gate, 3 piece gate, no rust, shedded, 300,000 original miles
76. Shane Maddock – Esmond, ND – 701-341-0485
– 2010 New Holland 790 baler, bale command control
– 2005 New Holland 1475 mower conditioner, new reel bars
77. Terry Hertzell – Munich, ND – 701-370-0699
– JD 4430 2wd tractor, 158 loader w/ grapple, new clutch & batteries, jobber 3pt, quad range, good rubber, 9660 hrs
– 16’ fishing boat w/ 25 hp Mercury motor, good motor, may possibly need tune up
– 7’ Bush Hog pull type rotary mower
– 10’ JD dozer w/ all mounts (4840)
– 1969 Chevy tandem twin screw truck, 427 engine with 5&4 transmission, 19’ box, swing out end gate, 48,300 miles
78. Alan Brossart – Rugby, ND – 701-208-0821
– 26’ JD series 1000 field cultivator, 6” space, inside W.T.
79. Derek Morey – Minot, ND – 701-509-9676
– 1974 C65 Chevy tandem grain truck, combination grain/potato box, 366 gas, 5+2 trans., tag axle
80. Leon Pfeifer – Minnewaukan, ND – 701-739-9378
– 30’ factory built header trailer
81. Kent Swenson – Lakota, ND – 701-247-3030
– 2004 New Holland model LS 140 diesel skid steer, standard bucket, has 3rd function, 5,500 hrs, 2,000 hrs on brand new engine, good tires, good over-all working unit
82. Logan Vollmer – Willow City, ND – 701-871-1254
– MacDon series 5000 mower conditioner
83. Gary Larson – Leeds, ND
– 1986 GMC general tandem twin screw grain truck, roll tarp, 6V 92 Detroit, 350 HP, 9 speed, Rugby box & hoist, 3 piece gate
84. Dean Kirsten – Kramer, ND – 701-228-8180 or 701-228-3455
– 8220 International pull type swather
85. Warren Moe
– (2) pallets of Pioneer 89 day RR corn seed
86. Joe Bata – Adams, ND – 701-331-0344
– Self catching head gate, Pride of the Farm brand, good shape
– Manual catch head gate, good shape
87. Other Quality Equipment
– 1466 IHC 2wd tractor has 565 Koyker loader w/ bucket & forks, 1000 P.T.O., 2 hyd, hub duals 20.8 38’s, 5380 hrs
– Ashland 3 ½ yd scraper
88. Other Equipment
– 1993 Chevy Silverado ½ ton 4wd pickup, ext. cab, long box, 350 engine, automatic trans., 99,800 miles
– 1980 Sportsman van, automatic trans., 89,000 miles
– 1977 17’ Lund Mr. Pike fishing boat, 35 hp Johnson outboard, has steering wheel & controls, full of fishing equipment, has trailer, all goes together, bought new
89. Troy Reemtsma – Cando, ND – 701-968-4515
– 1996 Chevy extended cab, intake manifold gasket and new starter within the last year, runs good, 333,350 miles
90. Dennis Backstrom – Maddock, ND – 701-438-2520
– 12×30 row JD planter w/ dry fert., pull type, markers and monitor
– 45’ Flexicoil chisel plow model 800, double fold, has 3 bar harrow
91. Richard Zimmer – Munich, ND – 701-682-5517
– 40’ Concord air seeder, 10" spacing, 3400 tank
92. Roxanne Gillespie – York, ND – 701-381-8629
– JD 2240 2wd tractor, factory 3pt, left hand reverser, 540 P.T.O., diesel, 146 JD lodader w/ grapple, 4910 hrs
93. Dick Rham – Devils Lake, ND – 701-370-0618
– Bourgault RBM 1650 bale mover, model 2007
94. Kim Kraft – St, Michael, ND – 701-351-5060
– (2) tractor tires 20.8×38’s (40%)
95. Ted Bjornstad – Cando, ND – 701-739-1564
– 1989 Ford L9000 truck, L-10 Cummins, 9 speed, 19’ Frontier box
– Rancher 250 creep feeder, bought new, only used a few times
– 26’ Bush Hog tandem disc, new bearings & bushings, only used on 60 acres
96. Jody McGarvey – Leeds, ND
– 32ft Prowler camper trailer
– 30ft Moller header trailer
– Buds welding 4-70 oil tank
– Craftsman metal turning lathe
97. Doug Schneider – Rugby, ND – 701-771-1053
– 1994 Ford Louisville seed tender truck, triaxle, stainless, 3 hoppers, 20 ton total, hyd. conveyor, new clutch, L-10 Cummins, 8 speed, esc., cond.
98. Hilman Benson – Cando, ND – 701-739-0386
– Case 1737 skid steer loader has bucket Manure fork w/ grapple
– 1995 Suzuki Intruder 1400 cc
99. Darryl Biby – Crurches Ferry, ND – 701-739-6238
– 2001 Ford .75 ton pickup, ext. cab., long box, diesel, 188,000 miles
100. Chris Pankratz – Munich, ND – 701-370-0461
– 2002 67XL Flexicoil sprayer, 1500 gal tank, hyd. fold, 114’ new pump, auto rate, wind screens
101. Susana Fast
– (3) 35 ft. head trailers
– (2) 30 ft head trailers
– 35 ft. head trailer
– (2) pull type hay feeders
– Trac closer
– (2) F10 box blade
– 165 3pt. rear tractor hyd. blade
– 9 ft 3pt. Blade
COME PREPARED TO BUY AT TWO RINGS
AUCTIONEERS NOTE: Each year, this has been a huge auction that always features an outstanding line of well-kept equipment. If you are looking for a specific piece, be sure to look this entire list over carefully as equipment is categorized by owner rather than by type of equipment. Additional note: This is partial list, new consignments are arriving daily. As other years, remember this auction always features unlisted and unadvertised items which results in a huge and interesting auction.
FINANCING: We offer on the spot financing the day of the auction. This is an exclusive service offered through Dakota Auctioneers, and Western Equipment Finance on Devils Lake, ND. To save time on the day of the auction, your financing can be lined up ahead of time by calling to David Lee to 800-451-7087 or 701-665-1681
INTERNET BIDDING: This auction will feature live internet bidding. For live bidding the day of the auction, go to www.proxibid.com Pre –registration is required prior to auction day
NOTE: Consignments are pouring in! Call today to reserve your spot. We are expecting another huge equipment auction. Plan today to attend!