Listing Now Posted! Please note the location change! This will be a live auction, with online bidding. 4WD, MFWD & 2WD Tractors, Combines, Heads, Semi Trucks, Trailers, Grain Carts, Wagons & More!! For more information call Steffes Ames at 515.432.6000
AGIRON AMES EVENT
BOONE, IOWA
Due to the Farm Progress Show dates, the Ames AgIron Event will be held at the
Boone County Fairgrounds, 1601 Industrial Park Road, Boone, IA 50036
Please note that Highway 17 will be closed during the Farm Progress Show, here are the directions and map to get to the Boone County Fairgrounds.
From Highway 30 turn north on to Snedden Drive for 1.5 miles, then right onto Mamie Eisenhower Ave for 0.5 mile, then north on to Quartz Ave for 0.5 mile then west onto Industrial Park Road for 1.5 miles, watch for signs.
4WD TRACTORS
2011 NH T9.505, 1,216 hrs., 4×4, powershift 16/2, 4 hyd., BB, 7″ color monitor, Intellisteer ready, 20 midmount suitcase weights, 1 pr. 1400 lbs. rear axle weights, 1 pr. 450 lbs. front axles weights, 710/70R42 duals, S/N ZBF214265
1994 Ford 9280, 5,106 hrs., 4×4, quadra-sync 12/4 trans., 4 hyd., BB, 18.4-42 tires, S/N D101074
1989 JD 8760, 5,892 hrs., 4×4, partial powershift, 24/6, 4 hyd., large 1000 PTO, diff lock, radar, 520/85R38 duals, S/N RW8760H001600
1980 IHC 3788 2+2, shows 3,359 hrs., 4×4, western cab package, 3 spd., high/low, TA good, DT-466B crate motor, 4 hyd., 3 pt., 1000 PTO, AC, diff. lock, 2 fuel tanks, owner states motor installed 500 hrs. ago in 2008 with paperwork 18.4-38 tires, S/N 2900001U9614
MFWD TRACTORS
2003 JD 8120, 3501 hrs., MFWD, deluxe cab, Active seat, buddy seat, 16/4 powershift, 4 hyd., 3pt., quick hitch, Cat 3 drawbar, large 1000 PTO, GS ready, radar, cold weather package, either starting aid, 42.5 gpm pump, front fenders, full coverage rear fenders, 8 front weights, 480/80R42 rear duals, 380/80R30 front tires, RW8120P014490
2000 NH 8970, – this unit will not be on the auction
1991 Ford 8830, hours unknown, MFWD, 4 hyd., 3 pt., small 1000 PTO, rear weights, 20.8R38 rear tires, 16.9-28 front tires, S/N A930131
2WD TRACTORS
IHC 986, – this unit will not be on the auction
COMBINES
2012 JD S680, 1,292 sep./1,886 eng. hrs., 2wd, premium cab, TriStream rotor, 7″ GS3 color touch display, ProDrive w/ HarvestSmart, Command touch multi speed drive, GS Auto-Trac ready, Y&M, 26′ unloading auger, power fold hopper, Powercast tailboard, HID lights, S series deep tooth chaffer, round bar concave, sidehill performance pkg., Firestone 650/85R38 duals, 750/65R26 rears, 1H0S680SJC0747334, Emission warranty until Oct. 2, 2017 or 3,000 hrs.
2008 JD 9870, 1862 engine hrs., PRWD, premium cab, deluxe controls, STS, Contour-Master, two spd, Xenon lighting, high torque variable spd. feeder house, integrated auto steer, Y&M, TouchSet, high cap. lift cyl., Mauer hopper ext., 22′ high cap. unloading auger, extra fine cut chopper, deep tooth chaffer, extended wear round bar concave, heavy duty final drives, sidehill cleaning pkg, power tailboard, 520/85R42 straddle duals, 28 l-26 rear tires
CORN HEADS
2013 Drago N8TR, chopping corn head, 8×30″, Series II, knife rolls, self adjusting deck plates, 3 sensor height control, JD S series hookup, S/N 2103313
2012 JD 612C, chopping corn head, 12×30″, Stalkmaster, stubble lights, opposed knives, S/N 1H00612CTCC746294
2012 JD 612C, corn head, 12×30″, stubble lights, poly snouts, ear saver, S/N 1H00612CACX746183
GRAIN PLATFORMS
2013 CASE-IH 2162 30 M10 2BE, flex draper head, 30′,– this unit will not be on the auction.
2008 JD 635F, Hydraflex head, 35′, hyd. fore/aft, single point hook-ups, stubble lights, poly snouts, poly teeth, S/N H000635F726813
CAT Lexion F540, flex head, 40′, hyd. fore/aft, single point hook-ups, full fingered, hyd. reel, S/N 44100324
HEAD TRAILERS – IMPLEMENT TRAILER
(3) 37′ Head Trailers (NEW)
(3) 32′ Head Trailer (NEW)
Head trailer, 30′, tandem axle, dual front wheels, 2 5/16″ ball, 245/75R16 tires
Donahue implement trailer, 24′
TRACK & SKID LOADERS
2003 Bobcat T250, 3,334 hrs., track skid loader, cab, Turbo, 78″ bucket, 2 spd., hand controls, aux. hyd., 18″ tracks, S/N 523111017
1999 Bobcat 873, 4,387 hrs., skidloader, hand controls, manual attachment, 12-16.5 tires, S/N 514124007
SKID LOADER ATTACHMENTS
Stout HD72-FB grapple bucket, New
Stout 72-8 brush grapple, New
Stout 48″ walk-through pallet forks, New
Stout tree & post puller, New
Hawz 84″ rock/brush grapple, 3” tine spacing, cylinder covers, New
Hawz 84″ root grapple, 6.5″ tine spacing, cylinder covers, New
Hawz 78″ rock/brush grapple, 3” tine spacing, cylinder covers, New
Hawz 76″ root grapple, 6.5″ tine spacing, cylinder covers, New
Hawz 74″ rock/brush grapple, 3” tine spacing, cylinder covers, New
Hawz 68″ rock/brush grapple, 3” tine spacing, cylinder covers, New
Hawz 68″ root grapple, 8″ tine spacing, cylinder covers, New
Hawz 84″ tine/manure grapple, 8″ tine spacing, New
Hawz 74″ tine/manure grapple, 8″ tine spacing, New
Hawz68″ tine/manure grapple, 8″ tine spacing, New
(2) Hawz Tree puller w/ push bar and cylinder cover rated for 8″ trees, New
Regular 48″ pallet Forks, New
(2) Receiver Hitches, New
(2) Universal Quick Attach Weld On Plates, New
(Set) of 7′ Pallet Fork Extensions, New
Late Additions:
(3) 3/4 Cu. Yard Concrete placement bucket skid steer mount
(4) Skid Steer Attach Frame
(3) 72″ 4 ga. Skid Steer Fork Extension
(3) 84″ 4 ga. Skid Steer Fork Extension
94” Hydraulic Skid Steer Loader Dozer Blade
72” Forklift Fork Extension
BOX BLADES
(3) 10′ box blade, New
(3) 12′ box blade, New
JD blade, 8′, 3 pt.
RIPPER – DISC
2008 JD 512, disc ripper, 5 shank, 12’6″, 23″ blades, 30″ spacings, new scrapers, shank protectors, walking tandems, S/N N00512X010456
Brillion Soil Commander SC, disc chisel, 9 shank, 12’6″, pull type, 4′ twisted shanks, S/N 176290
JD 630, disc, 22′, 20″ blades, 9″ spacing, single point depth control, tandem wheels under center, 4 bar coil tine harrow, new bearings & lift cylinder, $5,400 in shop receipts from JD S/N N00630X003440
SEMI TRUCKS – DUMP TRUCK
2004 Peterbilt 385, 906,411 miles, 60″ Unibilt Ultra detachable sleeper, C15 Cat, 525 HP, Eaton Fuller 10 spd., air ride cab and susp., twin aluminum 125 gal. tanks, 240″ WB, 295/75R22.5 on aluminum steers, 295/75R22.5 on aluminum outside, steel inside drive tires, VIN 1XPGDB9X04D811759
2004 Peterbilt 385, 923,779 miles, 60″ Unibilt Ultra detachable sleeper, C15 Cat, 525 HP, Eaton Fuller 10 spd., air ride cab and susp., twin aluminum 125 gal. tanks, 240” WB, 295/75R22.5 on aluminum steers, 295/75R22.5 on aluminum outside, steel inside drive tires, VIN 1XP-GDB9X-1-4D811768
2003 Peterbilt 385, 901,083 miles, 60″ Unibilt Ultra detachable sleeper, C15 Cat, 525 HP, Eaton Fuller 10 spd., air ride cab and susp., twin aluminum 125 gal. tanks, 240” WB, 295/75R22.5 on aluminum steers, 295/75R22.5 on aluminum outside, steel inside drive tires, VIN 1XP-GDB9K-3-4D811755
2000 Peterbilt 379, owner states approx. 673,013 miles (odometer replaced at approx. 660,000 miles), sleeper, Cat C-12, 430 hp, Eaton Fuller 10spd., air ride, air cab, air seat, air fifth wheel, diff. lock, 300″ WB, dual fuel tanks, aluminum wheels, setup for wet kit, no PTO, 11R-22.5 tires, VIN 1XP-5DU9A-7-YN548611
2006 International 9400 I Eagle, 1,087,969 miles, 60″ stand up sleeper, ISX Cummins, 435 HP, Eaton Fuller 10 spd., jake brake, diff. lock, mechanical slide w/ air release, 236″ WB, twin aluminum fuel tanks, 295/75R22.5 on aluminum steers, 295/75R22.5 on steel drive tires, VIN 2HSCNAPR26C225182
2006 Volvo 630, 1,046,753 miles, 48″ integral sleeper, ST2Cummins, ISX 400 HP, Eaton Fuller 10 spd., air ride cab & susp., engine brake, mechanical slide 5th wheel w/ air release, aluminum tube grill guard, twin 125 gal AL fuel tanks, 216″ wheel base, 295/75R22.5 on aluminum steers, 295/75R22.5 on steel drive tires, VIN 4V4NC9TG96N431625
GMC Brigadier, 825,697 miles, triple axle dump truck, Diesel 8000, 13 spd., twin screw with cheater axles, Crysteel 17′ dump box, 36″ sides, full end gate, 425/65R22.5 on steel steers, 11R22.5 on steel drive tires, VIN T48CYAV559301
1974 Chevy C65 straight truck, 366 V8, 5/2 spd., elec. over hyd., tag axle, 20′ steel box
1981 Chevy 6500 straight truck, 466 Detroit diesel, elec. over hyd., tag axle, 5/2 spd., 20′ steel box
SELF UNLOADING TRAILER – GRAIN TRAILERS
2010 CEI Pacer AT70L 42′, self unloading aluminum commodity trailer, tandem axle, paddle belt, two way end gate, 11R22.5 on aluminum, S/N AT70L-42-3181, VIN 1CX9FC4221A1257181
2007 Timpte hopper bottom grain trailer, 66″ sides x 42’ length, air ride, ag hoppers, electric tarp, stainless back, 11R24.5 tires, alum outers VIN H422218B115454
1999 Merrittsteel hopper bottom, 42’x96″x68″ sides, air ride, Ag hoppers, rear reduction on hoppers, tarp, 11R24.5 on aluminum outside steel inside, VIN 1MT2P4224XH011872
POT TRAILER – STEP DECK TRAILERS
1999 Wilson Silver Star 53′ x 102″ x 14′ sides, aluminum livestock pot, double deck, triple axle, full L shape doghouse, fall deck, spring ride, fiberglass top, 285/75R24.5 on aluminum, VIN 1W1UCS218YD522511
1999 JOST A-400 T17 53’x102″, step deck trailer, 9′ neck, 44′ deck, tandem axle, wood floor covered with wire mesh, air ride suspension, 3 aluminum tool boxes left side, mounted ratchets, DACO hoist, 215/75R17.5 on aluminum outside, steel inside
FEED TRAILER – TANK TRAILERS
1990 D M Clark 2FDR4-3630-ENAM 42’ tandem axle feed trailer, 9 compartment, 30’x10″ hydraulic drive auger, S/N 90-E-058 VIN 1B9A40205LM020058
1989 Sunshine Tank & Equipment 45′ tandem axle tank trailer, 7000 gal. aluminum tank, damaged stainless steel skin, steel frame, spring ride, 295/75R22.5 on steel, VIN 1S9T00002K1129091
45’ tandem axle tank trailer, 8000 gal. aluminum tank, steel frame, spring ride, 6″ and 3″ rear valves, 295/75R22.5 on steel
GRAIN CARTS – WAGONS
2009 Parker 938 grain cart, 18″ unload auger, adjustable deflector spout, tarp, large 1000 PTO, Trelleborg 900-60-32 bar tires, S/N B25800155
2008 Brent 678 grain cart, 17″ corner auger, adjustable deflector spout, tarp, large 1000 PTO, 18.4-42 straddle duals
Brent 974grain cart, 17″ corner auger, large 1,000 PTO, roll tarp, scale, 35.5L-32 tires, S/N B1657128
Parker Grain Buggy, 450 bu. grain cart, tandem axle, 12″ front auger, small 1000 PTO, 16.5L-16/1 tires
Parker Grain Buggy, 400 bu., on Parker gear
Big 12 12K grain cart, side discharge auger, 540 PTO, 18.4-26 diamond tread tires (missing tractor side PTO)
2003 Brent 644 gravity wagon, tarp, lights, brakes, LH discharge, 445/65R22.5 S/N B20130199
2003 Brent 644 gravity wagon, tarp, lights, brakes, LH discharge, 445/65R22.5 S/N B19930170
Dakon gravity wagon, RH discharge
Late Additions:
Brent 570 grain cart, 14″ unload auger, scale, Shurlock tarp, small 1000 PTO, 23.1-26 tires
Brandt 61’x10″, pit express drive over hopper, 540PTO
BALER – SILAGE WAGONS
2005 NH BR780 round baler, twine wrap, 540 PTO, 31×13.5×15 tires, S/N 61854
JD EO 125 silage wagon, tandem axle, chuck wagon, LH and rear discharge, 540 PTO, S/N 003453C
Badger 1416 silage wagon, single axle, front LH discharge, 540 PTO, S/N 7009
Balzer20’ silage wagon, tandem axle, front LH discharge, 540 PTO
Kelly Ryan Feed R Wagon, 5’x12′, 540 PTO, 11R27.5 tires
APPLICATORS
1997 Snyder 110 gal. tank tote, chemical tote, Scienco Products DD6 Drive unit, 12 VDC, 1″ banjo outlet
500 gal. SS liquid fertilizer applicator, 9 knives, 8 row, pull type, ground driven, John Blue pump, back sweep knives
UTV’S
2012 JD 825 Gator, 575 hrs., 3,740 miles, 4×4, EFI, electric bed, near new 26×9.00-12 tires, S/N 1M0825GSHCM050051
2008 Cub Cadet Volunteer, UTV, 739 hrs., 4×4, EFI, dump bed, S/N 1B078G40006
Polaris 800 Twin – this unit will not be on the auction
LAWN MOWER – BRUSH CUTTERS
2006 Gravely 260Z, 473 hrs., zero turn lawn mower, 60″ hyd. deck, Kawasaki 25 hp, S/N 00962
Woods MD 184 brush cutter, 7′, 540 PTO, 3pt.
King Cutter brush cutter, 6′, 540 PTO, 3pt., single blade
FENCING – EQUIPMENT
(60) New 20′ continuous fence panels 6 bar with clips & connectors
(20) New 12′ portable interlocking corral panels, 5′ tall
2015 Compress/Welder/Generator w/ Honda GX 390 electric start engine, AC 120V/240V, rated at 1380 KPA @ 150 deg C, 30 gal tank, New, S/N UM1518169
Digital Power Systems DP-6518 portable air compressor, w/ Honda GX200 6.5 HP, cast iron Tri-Tech Oil lubricated Pump 150 PSI, 18 CFI at 100 P.S.I, 10 gal, 8.8 BAR, New, S/N T150907012051
Digital Power Systems DP65HV-P concrete vibrator & submersible pump, 6.5 HP Honda GX 200 OHV engine, w/ submersible pump attachment, 3″ discharge, 25 ‘ depth, 150 G.P.M and 22″ Vibrator attachment, 25’ reach, 11,000 vib per minute, New
JD Cat 2, 3pt. quick hitch, New
Assortment 540 PTO shafts
1300 gal. poly water tank w/ 5hp pump
Assorted rough cut hardwood lumber stickered, 10-12% moisture, stored inside
(50) Black Hills spruce trees, 3′ tall, container grown
(6) Merritt aluminum headache racks
Late Additions
(2) Standard Duty 1 Cubic yard Stackable Self Dumping Hopper, (4,000 lb. capacity)
(2) Standard Duty 1.5 Cubic yard Stackable Self Dumping Hopper, (4,000 lb. capacity)
(2) Standard Duty 2 Cubic yard Stackable Self Dumping Hopper, (4,000 lb. capacity)
3/8 AR500 Steel Deer Shooting Target w/ heart flapper
(2) 3/8″ AR500 Dueling Tree Shooting Target
(2) 3/8″ AR500 Gong Target
(10) 28″X90″ Steel Grain Feeder
(2) 29.5″X90″ Heavy Duty Work Bench w/ shelf
(4) 30″X57″ Heavy Duty Welding Shop Table with shelf
9000 LB Heavy Duty Two Post Auto Lift
20FT Heavy Duty Bi-Parting Wrought Iron Driveway Gate (to sell as one pair)
82” Heavy Duty Rotary Tiller c/w: gear drive, 3 point PTO shaft w/overrunning clutch
20FT X 30FT X 12FT Peak Ceiling Storage Shelter C/W: Commercial fabric, roll up door
16 ft x 22 ft Marquee Event Tent, C/W: 320 sq.ft, one zipper door, 7 windows, heavy duty frames and fabrics
20 ft x 20 ft Pagoda Party Tent, C/W: side walls, windows and zip doors
50 Ton Hydraulic Shop Press
Heavy Duty Tire Changer, c/w: 110v 60 hz
Heavy Duty Wheel Balancer c/w: 110v 60 hz
3 PTO Heavy Duty Wood Chipper C/W: fit 40-70hp
10FT 20 Drawer Heavy Duty Metal Work Bench with hanging peg board c/w 40” high hanging peg board, stainless steel drawer panel, metal handles
3/8″X50′ Air Hose Reel
1″ Dr. Air Impact Wrench Kit
Welding Helmet Solar Power
Battery Load Tester
ATTENTION CONSIGNORS
CONSIGNMENTS WILL BE ACCEPTED ON
Monday, August 22nd – Friday, August 26th from 8am-5pm
Saturday, August 27th from 8am – Noon
Last day to consign is Saturday, August 27th
NO CONSIGNMENTS TAKEN starting Monday, August 29th
ATTENTION BUYERS
Sales tax applies. $35 pc per titled item. All items to be removed within 7 days.
Load out times after auction are:
Friday, September 2nd, 8am-5pm
Saturday, September 3rd, 8am – 12 Noon
All other load out times are by appointment!
Please note: Items must be removed from the Fairgrounds by September 8th, no exceptions!
STEFFES GROUP
Call Duane Norton, Seth Twedt, Tim Meyer, Terry Hoenig, Chris Richard, Nate Larson, Jared Miller, Russ Lamp
at 515-432-6000