Ring 2 will include Balers, Livestock Equipment, Skid Steer Loader Attachments, Stock Trailers, Gravity Boxes, Small Tillage, Tires. Live online bidding available on major equipment. Contact auctioneers for owner information, new consignments, or changes at 320.693.9371.

 

AGIRON LITCHFIELD EVENT

 

 

LOCATION: 24400 MN Hwy 22 S., Litchfield, MN.

 

 

 

AUCTIONEER’S NOTE: Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment. Contact auctioneers for owner information, new consignments, or changes at 320.693.9371. 

 

SILVER LAKE MN ESTATE

2000 JD 9550, conventional Contour-Master, GreenStar ready, Maurer hopper top, rock trap, chopper, chaff spreader, Vittatoe double chaff spreader, Firestone 18.4-42 straddle duals set on 30″, 2,021 sep. hrs., 2,942 engine hrs., S/NH09550W685989

1998 JD 930F flex head, hyd. fore/aft, full finger auger, flex shafts, poly snouts

JD 894 flex head, 9×22″, oil bath, flex shafts, poly snouts, S/NH00894B695752

Case-IH header trailer, 30′, 4-wheel transport, low pro tires

 

TRACK & 4WD TRACTORS

JD 8400T track tractor, 4 hyd., 3 pt., 1000 PTO, narrow gauge, full front weights, 16″ tracks set at 88″, 8,400 hrs., will be completely serviced

1992 JD 8760, 4WD, CAH, 24 spd., 3 hyd., 18.4-46 duals, 7,318 hrs., 0 hrs. on engine major w/receipts

 

MFWD TRACTORS & LOADER

2006 JD 7220, MFWD, CAH, buddy seat, 24 spd., 3 hyd., 3 pt., quick hitch, 540/1000 PTO, front suspension, left hand reverser, loader joystick controls, beacon light, JD 741 loader, 8′ bucket, quick tach loader, quick tach bucket, front fenders, 380/85R28 front tires at 95%, 460/65R38 rear tires at 95%, 6,820 hrs., S/NRW7220R053623

1988 Case-IH 7130, MFWD, CAH, new air ride seat, powershift, 3 hyd., 3 pt., 1000 PTO, diff lock, radar, CD player, K&M ext. mirrors, (12) front weights, Goodyear 14.9-28 tires at 50%, New Firestone 480/80R42 tires, Firestone 480/80R42 duals, 35%, 7,069 hrs., 50 hrs. on all rebuilt SCV valves, less then 50 hrs. on rear inside Firestone tires, less then 100 hrs. on new hyd. oil, S/NJJA0004460

JD 4760 MFWD, powershift, 3 hyd., 3 pt., quick hitch, 1000 PTO, front fenders, 380/85R30 front tires, 18.4-42 w/duals, shows 3,458 hrs., S/NRW4760P002201

IHC 5488, MFWD, CAH, 3 hyd., 3 pt., 1000 PTO, 18.4-42 duals, 7,770 hrs.

 

2WD TRACTORS, LOADERS, & TRACTOR ATTACHMENTS

IHC 1086, CAH, 2 hyd., 3 pt., 540/1000 PTO, 18.4-38 tires, 6,866 hrs., S/N2610181U33054

1972 IHC 1066 Turbo, factory wide front, Year Round cab, 2 hyd., 3 pt., no top link, 540/1000 PTO, Firestone 10:00-16 front tires, Goodyear 18.4-38 rear tires, shows 6,474 hrs., runs, S/N2610159U018290

IHC 560, wide front, diesel, fast hitch, 540 PTO, no factory TA, (4) New tires

IHC 454, 3 cyl. diesel, 3 pt., 540/1000 PTO, power steering, bar lug tires

JD 4020, wide front, syncro, 3 pt., PTO, 10:00-16 front tires, New 18.4-38 rear tires

JD 3020, wide front, cab, heat, gas, 1 hyd., 3 pt., PTO, w/JD 148 loader, fenders, tire chains

1963 JD 3010, narrow front, 2WD, gas, syncro, 1 hyd., 3 pt., PTO, rebuilt engine & new clutch, single owner

JD 3010, wide front, cab, heat, diesel, syncro, 2 hyd., 3 pt., 540 PTO, Farmhand 248 quick tach loader, 8′ bucket

Case 1070, cab, 2WD, diesel, 2 hyd., 3 pt., PTO, rock box, 18.4-38 duals, 7,512 hrs., S/N7805745

Case 430, wide front, open station, diesel, 2 hyd., 3 pt., PTO, power steering, 14.9-28 tires, 2,637 hrs., S/N8257794

White 2-105, diesel, 2 hyd., 3 pt., PTO, rock box, 18.4-38 tires

AC D17 Series II, wide front, gas, 2 hyd., 540 PTO, snap coupler

AC D17, wide front, diesel, 1 hyd., 540 PTO, power steering, Series II snap coupler, 16.9-30 tires, recent injection pump work, original paint

MF sub compact tractor

MM Z Standard, wide front, gas, PTO, 12.4-38 tires, not running, S/N01805562

MF 44 pulling tractor, narrow front, V8 gas, (5) front weights, wheelie bars, Firestone 18.4-34 deep treads on pressed steel tires, needs work

JD B Styles, narrow front, PTO

MM ZA narrow front, gas, PTO, 12.4-38 tires, S/N0345001521

2005 JD 5303 utility tractor, 2WD, ROPS, open station, 2 hyd., 3 pt., 540 PTO, roll bar, 7.50-16 front tires, 16.9-28 rear tires, shows 857 hrs., S/NPY5303U004600

JD material bucket, 6′, fits JD 245/260/265 loaders

JD bale spear, fits JD 245/260/265 loaders

(2) JD loader buckets

Dirt bucket, 7′, tractor mount

Loader w/bucket, for 86 Series tractors

Loader bucket, 9-1/2′

Schwartz loader, w/snow bucket & manure bucket, Case or IHC mounts

JD loader bucket, 6′

JD 50 power steering, S/N5007146

 

COMBINES

2005 JD 9760, STS, Contour-Master, 2WD, RWA, deluxe controls, HD variable spd., GreenStar Y&M, feeder house, deep tooth chaffer, 22-1/2’ unload auger, side hill cleaning show pkg., HID lights, 20.8-42 straddle duals, 600/65R28 rear tires, 2,112 sep. hrs., 3,416 engine hrs., S/NH09760S710825

2004 JD 9660, STS, Contour-Master, deluxe controls, HD variable spd., GreenStar Y&M, feeder house, high cap. lift, Maurer hopper ext., long auger, mud shields, single pt. hookup, Firestone 18.4-42 straddle duals, 16.9-26 rear tires, 3,188 sep. hrs., 4,671 engine hrs., through shop each year, second owner, S/NH09660S706962

IHC 1480, axial flow, rock trap, Goodyear 30.5L-32 front tires, Titan 14L-16.1 rear tires, 6,266 hrs., S/N44685

1979 IHC 1440, turbo diesel, hydro, 23.1-26 tires, 4,578 hrs., S/N1680211U005614

IHC 1440, rock trap, chopper, 23.1-26 front tires at 70%, 11.2-24 rear tires at 25%, 4,260 hrs., New drum, patches, feeder house floor, beaters, new sieve bushings, clean grain & return grain elevator, all done in last 4 seasons, A/C works needs charging, S/N1680229U040021

JD 7701 pull-type, 1000 PTO, JD 212 pickup head w/5-belt pickup, owner states excellent working order, shedded, second owner

JD 6600 combine, bin ext., chopper, rear weight pkg., 28L-26 tires, 4,734 hrs., New engine oil & filter, sieves have been replaced, owner stated is field ready, needs A/C recharged, S/N211862

 

FLEX DRAPER & FLEX HEADS

2014 JD 640FD flex draper head, 40′, S/N108336

2009 JD 635F flex head, 35′, full finger auger, Crary air reel, S/N730251

2004 Case-IH 1020 flex head, 30′, hyd. fore/aft, 3′ Crary cut (gold cut)

JD 920F flex head head, 20′, good poly

1981 IHC 820 flex head, 20′, S/N1480106U010772

JD 224 flex head

 

CORN HEADS

2009 JD 608C chopping corn head, 8×30″, StalkMaster, hyd. deck plates, RowSense, single pt. hookup

2004 Drago corn head, 6×30″, steel snouts, S/N21014

1996 JD 893 corn head, 8×30″, flex shafts, single pt. hookup, run through shop each year, S/NH00893X666450

Case-IH 1063 corn head, 8×22″, flex shaft, knife rolls, GVL poly, (2) seasons on new gathering chains, S/N73179

Cressoni chopping corn head, 8×30″, hyd. deck plates, S/N83045003

IHC 820 corn head, 8×20″, ear savers, poly snouts, JD 100 Series hookup

JD 843 corn head, 4×30″

JD 444 corn head, 4×30″, low tin, S/NH00444X60083

JD 443 corn head, 4×30”

Clark Machine 922 corn head, 9×22″, oil drive, flex shafts, kinfe rolls, poly, cob saver, Case 2388 hookups

 

OTHER HEADS

JD 658A all crop head, 6×30″

IH 810 pickup head, w/Melroe pickup, S/N1480109U37004

 

PLANTER

JD 7000 corn planter, 3 bu. hopper

 

HEADER TRAILERS

Maurer header trailer, 38′, brakes, tandem torsion axles

(4) Header trailers, 37′, brakes, lights, 7,000 lb. axles, New

(4) Header trailers, 32′, brakes, lights, 7,000 lb. axles, New

Unverferth HT-30 header trailer, 30′, 4-wheel

Byron TR410 bumper hitch header trailer, 30′

Horst header trailer, 25′, single axle

(2) 435 header trailers

(2) 430 header trailers

835 header trailer, w/brakes & lights

440 header trailer

 

GRAIN CART & GRAVITY BOXES

Brent 472 grain cart, large 1000 PTO, S/NG20380127

H&S gravity box, 450 bu., on Knowles running gear, 16.5-16.1 tires

Parker gravity box, 350 bu., 9.00-20 tires

Wood grain box, w/hoist, on Minnesota running gear

Gravity box, 200 bu., on JD running gear

Year Round gravity box, 400 bu., on Westendorf 12 ton running gear, 16.5L16.1 tires

Brent 420 grain cart, Firestone 20.8-38 tires, S/NB17690155

Parker grain cart, 1000 PTO, tarp, tandem axle

M&W Little Red Wagon gravity box

Parker 2600 gravity wagon, Notch 10-ton running gear, 12.5-15 implement tires

Nu-Built gravity wagon, 200 bu., on Husky running gear

 

CHISEL PLOWS, DISC RIPPERS

2008 JD 2410 chisel plow, 30′, 15″ spacing, AccuDepth, single depth control, 4-bar harrow, setup for anhydrous

2006 JD 2700 disc ripper, 9 shank, 24″ spacing, single pt. depth, S/NN02700X004042

DMI Coulter Champ II HD ripper, 5 shank, front discs, lead shanks, rear leveler

JD 1610 chisel plow, 25′, S/N30821

Ford 133 chisel plow, 15′

IHC chisel plow, 10′, 12 shank, hyd. lift, pull-type, on transport

White 435 chisel plow, 12 shank, walking tandems on main

Hiniker chisel plow, 8′, pull-type

Glencoe chisel plow, 13 shank

JD 610 chisel plow, 24′, tandem across

 

PLOWS

JD 3710 plow, 9 bottom, auto reset, S/NN03710X001445

IHC 700 moldboard plow, 7×18″, auto reset, on land hitch, S/N1050000U003487

IHC 720 auto reset plow, 5×18″, semi-mount, coulters, shedded, single owner

IHC 720 toggle trip plow, 4×18″, semi-mount, coulters, 90% rear parts

White 588 semi-mount plow, 6×16″, spring reset

Case moldboard semi-mount plow, 3×16″, hyd. lift

2013 JD 3710 auto reset plow, 10×18″, coulters, S/N001938

 

DISCS

AC 2300 disc, 20′, manual wing fold, hyd. lift, pull-type

AC 2300 disc, 16′, manual wing fold

JD 210 disc, 15′, cone blades, mud scrapers, 11L-15 tires, S/N027797

IHC heavy duty pull-type notched blade disc, 12′, hyd., lift, on transport

 

FIELD CULTIVATORS, HARROW

Case-IH 4900 field cultivator, 38-1/2′, tandems on mains & wings, 3-bar harrow, rear hitch, S/N26149

IHC 4800 field cultivator, 32′, tandem on mains & wings, 3-bar harrow

1990 JD 960 field cultivator, 7″ sweeps on 6″ center, single pt. depth, 3-bar harrow, S/NN00960X012717

JD 1010 pull-type field cultivator, 26′, flat-fold, 3-bar harrow

Lindsey pull-type harrow, 30′, rear fold

 

STALK SHREDDERS

Alloway stalk shredder, 20′, 3 pt., 1000 PTO, (4) rear wheel assist wheels, working order, shedded, single owner

Balzer pull-type stalk shredder, 6×30″, 1000 PTO, hyd. lift assist, (4) rear gauge wheels

Sunmaster FK144 stalk shredder, 12′, 540 PTO, pull-type, hyd. lift w/cylinder, (2) rear gauge wheels, 1 season on new knives, S/N97096-050-1076-1

JD stalk shredder, 15’, 540 PTO

JD 27 stalk shredder, 16′

IH stalk shredder, 12-1/2′, 540 PTO

2005 Loftness stalk shredder, 20′, large/small 1000 PTO, pull-type

 

SEMI TRACTORS

2001 Mack Vision, day cab, E7 355 hp., 10 spd., air ride, diff lock, dual tanks, 178″ WB, 11R22.5 tires on all aluminum, 740,000 miles

Kenworth W900, 70″ sleeper, 295/75R22.5 tires on front aluminum rims, 11R22.5 tires, for parts

 

BOX TRUCKS

1970 GMC 9500 tri-axle, air lift tag, Brigadier cab, 671 Detroit, 5 trans., diff lock, 24′ box, hoist, roll tarp, 2-pc. endgate, 13:00-20 front tires, 10:00-20 rear tires, 6,700 miles on engine major & clutch

1975 Ford L8000 twin screw, Cummins, 20′ box, hoist, air brakes, 10:00-20 tires

1975 IHC single axle flatbed truck, 396 gas, 5&2 spd., (2) 1,500 gal. tanks, Honda transfer pump

1974 Chevrolet C65 tandem axle, 427, 5&4 spd., 18′ steel box, hoist, tarp

1974 Chevrolet C60 tag tandem, V8 gas, 4&2 spd., spring susp., J-Craft 18′ box, hoist, roll tarp, (2) fuel tanks, rear hyd. remote for drill fill, rear hitch, 10:00-20 tires, 69,119 miles, single owner, shedded

1973 Ford 9000 tandem axle, 871 Detroit, 13 spd., diff lock, air brakes, 20′ box, hoist, roll tarp, 3-pc. endgate, New 11R22.5 front tires, 10:00-20 rear tires at 70%, 26,000 miles on engine major & clutch

1972 Chevrolet single axle w/rear tag, V8 gas, 4&2 spd., J-Craft 16′ steel box & hoist, second owner, stored inside

Ford 800 single axle, V8 gas, 5&2 spd., 16′ wood box, hoist, 10:00-20 tires

1971 GMC 6500 tandem axle, V8 427 gas, 5 & 2 trans., Frontier 19′ box, 9.00-20 rear tires

1976 Chevroley C65 single axle grain truck, gas, 14′ wood box, S/NCCE666V116462

1984 Chevrolet C70 single axle grain truck, gas, 14′ wood box, S/N1GBL7D1BXEV125845

 

SERVICE TRUCK & PICKUPS

2002 Ford F450 ambulance,7.3 diesel, automatic, built-in inverter, 20 amp., (2) house batteries, front tow bar, tool boxes, 323,807 miles, S/N 1FDXE45F62HA45688

1999 Ford F350 crew cab dually, long box, 7.3 diesel, powerstroke,automatic, 4WD, front tow bar,  farm style spring hitch, gooseneck hitch (in box), 235/85R16 duals, 320,806 miles, S/N 1FTWW33F4XEC97071

2008 Chevrolet 1500, 4-door, short box, gas, automatic, 4WD, tinted windows, spray-on bed liner

2004 Chevrolet Silverado, Z71, 4 door, ext. cab, 8′ box, 5.3 liter gas, 4WD, CD, power windows & locks, chrome running boards, 148,000 miles, single owner

1997 Dodge 1500, 1/2 ton, V8, automatic, power windows & locks, alloy wheels

1996 GMC 3500HD crew cab, flatbed w/hoist, gas, 4 spd., automatic, 5th wheel hitch, rear HD pintle hitch, (2) tool boxes under bed, headache rack w/lights, 225/70R19.5 tires, S/N 1GDKC34J0TJ51127

 

HOPPER BOTTOM & END DUMP TRAILERS

2015 Timpte hopper bottom, 42’x72″, air ride, roll tarp, 24.5 tires on steel rims

2005 Timpte hopper bottom, 40’x66”, ag hopper, air ride, electric roll tarp w/remote controls, 11R24.5 tires on aluminum rims

1978 East tri-axle aluminum end dump trailer, 28′

1988 Wilson hopper bottom trailer, 42′, roll tarp, 11R24.5 tires, S/N1W19AF1E8J2212089

 

OTHER TRAILERS

2008 Utility van trailer, 53′, spring ride, 24.5 tires on steel wheels

1994 Great Dane drop deck trailer, 48’x96″, air ride, spread axle, steel, wood deck

1993 Wilson flatbed trailer, 48’x96″, 10 spread, air susp., steel frame, aluminum deck, 11R22.5 tires on steel budds

1985 Fruehauf flatbed trailer, 45’x96″

JD Donahue trailer, 35′

1981 Adam tanker trailer, 40′, 5,000 gal., (2) 4″ discharge valves

Sanburn tandem axle bumper hitch livestock trailer, 16′, newer floor, 31-10.50R15LT tires

1986 W&W tandem axle 2-horse trailer, tall height, center divider

Calico tandem axle bumper hitch livestock trailer, 16′, w/divider, farm use only, No Title

Bumper hitch trailer, 5’x8′, steel mesh floor, w/ramp

Road King single axle trailer, 16’, bumper hitch, 540 PTO, hyd. dump

Shop-Built 2-wheel trailer

 

SPRAYERS

Hardi TR100 tandem axle sprayer, 60′ Eagle boom, 1,000 gal. tank, 540 PTO w/361 pump, foam markers

AgChem 302 sprayer, 38′ boom, 300 gal., on transport, S/N7132165

Redball band sprayer, 12×30″, front-mount

 

NH3 EQUIPMENT

DMI 5300 anhydrous applicator, 24 C-shank, 22″ spacing, JD rate controller, hyd. winch, rear hitch, S/N623258

DMI 4250 anhydrous applicator, 37-1/2′, 30″ spacing, 15 shank, wing fold, walking tandems, furrow fillers, rear hitch, Raven 440 monitor, S/N862963

DMI anhydrous bar, 30′, 30″ spacing, 13 shank, 3 pt. or pull-type, wing fold, Continental regulator

NH3 tank, 750 gal., on 4-wheel transport

 

SKID STEER LOADER & ATTACHMENTS

2009 Bobcat S250 skid steer loader, cab, 2 spd., heat, aux. hyd., hyd. quick tach, hand/foot controls, no bucket, 3,564 hrs., runs, needs fuel cap, S/N530915623

Ford 340 skid steer loader, gas, S/N2612

Bobcat pallet forks, 48″, skid steer loader mounts

Hawz rock/brush grapple, 84″, 3″ tine spacing, cylinder covers, New

Hawz rock/brush grapple, 78″, 3″ tine spacing, cylinder covers, New

Hawz rock/brush grapple, 74″, 3″ tine spacing, cylinder covers, New

Hawz rock/brush grapple, 68″, 3″ tine spacing, cylinder covers, New

Hawz root grapple, 84″, 6.5″ tine spacing, cylinder covers, New

Hawz root grapple, 76″, 6.5″ tine spacing, cylinder covers, New

Hawz root grapple, 68″, 6.5″ tine spacing, cylinder covers, New

Hawz tine/manure grapple, 84″, 8″ tine spacing, New

Hawz tine/manure grapple, 74″, 8″ tine spacing, New

Hawz tine/manure grapple, 68″, 8″ tine spacing, New

(2) Hawz tree pullers, w/push bar & cylinder covers, rated for 8″ trees, New

(2) Hawz receiver hitches, for skid steer loader, New

(2) Hawz universal quick attach weld-on plates, for skid steer loader, New

Set Hawz pallet fork extensions, 7′, New

Notch rock bucket, 68″, skid loader attachment

Stout HD72-3 rock bucket/brush grapple combo, open end, w/skid steer loader quick attach, New

Stout 72-8 brush grapple bucket, w/skid steer loader quick attach, New

Stout 66-9 brush grapple bucket, w/skid steer loader quick attach, New

Stout tree & post puller, w/skid steer loader quick attach, New

Stout round bale spear, w/skid steer loader quick attach, New

Virnig manure grapple bucket, 72″, skid loader attachment, S/N73190

Skid steer loader dirt bucket, 6′

Feed pusher, skid loader attachment

(2) Manure scrapers, skid loader attachment

(2) Solid quick tach weld-on plate

Brush grapple, 72″

Utility tine grapple, 72″

Dirt bucket, 80″

Tree/post puller

(4) Skid steer loader attach frame

(3) Skid steer loader forks, 84″

(3) Skid steer loader forks, 72″

Angle broom, 72″, skid steer loader attachment, New

Heavy duty two post auto lift, 9000 LB

Hydraulic skid steer loader dozer blade, 94″

Brushcat 72HF bucket, 72″, high flow, used on a low flow skid steer loader, S/NA01B00133

Heavy duty walk through pallet forks, 60″, 5500 lbs., New

Walk through pallet forks, 48″, 4000 lbs., New

Walk through pallet forks, 48″, 5500 lbs., New

Square bale spear

(2) Trailer movers

 

HAY EQUIPMENT

Frontier WR1212C wheel rake, 12-wheel, front fold, center kick wheel, rear tandems, S/NHCWR1212C600154

NH 1431 mower conditioner, 13′, 1000 PTO, hyd. swing, rubber rolls, S/N640254

Gehl 2365 mower conditioner, 9′, rubber rolls, 540 PTO, hitch, S/N10620

1994 JD 535 round baler, 1000 PTO, Bale-Trak monitor, S/NE00535X986473

NH 650 round baler, 4×6, 540 PTO, net wrap, monitor

Harvest applicator, 30 gal. tank, w/monitor, fits JD 468 & 469 balers

NH 315 small square baler, w/#58 thrower, single owner, just through shop

Case 220 small square baler, 540 PTO

NH Hay Liner 68 small square baler, stored inside

Notch 10BT bale cart, 12 bales, 315/80R22.5 tires, green, S/N14378

JD quick tach bale spear, w/JD 741 loader mounts

Shop-Built bale spear, 4-spear, off JD 148 loader

625 bale wagon, holds 8 bales

 

FORAGE EQUIPMENT

Gehl 1075 forage chopper, 1000 PTO, electric spout, hyd. tongue, in-cab controls, w/Gehl 1000 kernel processor and Gehl 2×30″ corn head, S/N12400

JD 3800 forage chopper, 1000 PTO, hyd. spout, screen cutter, JD hitch, winch, extra sprocket, w/2×30″ corn head

JD 3840 forage harvester, w/hay head, equal angle hitch

Gehl 1075 hay head, S/N3230

New Idea corn picker, 3×30″

New Idea picker/grinder, 2×30″, 540 PTO

Oliver 73H pull-type corn picker, 2×36″, manual & hyd. lift, long rear elevator, sells w/hyd. lift parts

 (2) H&S XL-19 silage boxes, 14′, 540 PTO, side unload, on 4-wheel Minnesota 8-ton running gear, 11L15 tires, S/NB9216, S/NB9286

JD 750 grinder mixer, w/screens

Artsway 425A grinder mixer, 540 PTO, magnet, extra screens

Bearcat roller mill on transport

Roorda single axle feed wagon, 540 PTO, chain drive

JD 64 silage blower, 48″, 540 PTO, shaker pan style, spout ext.

 

LIVESTOCK EQUIPMENT

Balzer 4200 Magnum manure spreader, small 1000 PTO, direct injection/surface apply, fenders, lights, Low-Pro tandem running gear, 28L26 tires, S/N4562-5199

Starline rota manure spreader, side slinger, 540 PTO

NH 155 manure spreader, w/slop gate

Houle manure pump, 14′, 6″ pipe, 3 pt., 540 PTO

(12) J&D barn fans, 36″

(2) Smidley steer stuffers, 200 bu. capacity

(5) Cattle scratchers

(80) Continuous panels, 20′, 6-bar w/clips & connectors, New, sold price per panel

(60) Portable Interlocking corral panels, 5′, New, sold price per panel

Half-moon round bale feeder

(20) Poly dome calf huts

(10) Poly square calf huts

(24) Cow mats, 4’x65″, air bed cow mattresses

Barn fan, 36″, New

Handlair 560 grain vac, 1000 PTO, cleanup kit, on transport, Rebuild w/100 hrs., S/N560-15288

Balzer manure tank, 3300 gal., hyd. drive, injector or top spread

Head gate

(7) Cattle feeders

Calf feeder, 10’

Round feeder

Small bar feeder

Gate, 10’

Gate, 16’

Feeder wagon

 

GRAIN HANDLING EQUIPMENT

Harvest International H1062 auger, 62’x10″, 540 PTO, low pro swing hopper, scissor lift, New, S/N04990

2012 Westfield auger, 71’x13″, swing hopper, w/hopper walker

Feterl auger, 66’x10″, 540 PTO, swing hopper, on transport

Sheyenne 1410 auger, 60×10″, 540 PTO, swing hopper, on transport, New demo, S/N30689

Grain bin, 40′ diameter, stand approx. 4′ tall, hold 30-35,000 bu., w/aeration tubes & fans, on pallet

IHC conveyor, 36′, 17′ paddle belt, hyd. orbit drive, on transport

Caldwell 110 bin dryer & tube

Auger, 6″x35′, Briggs & Stratton engine, on transport

Auger hopper, steel

Westfield auger, S/N120309

Auger, 6×50’

Alloway GA15 auger, 60′, electric motor, 10 hp., 3 phase

 

TRACTOR LOADER BACKHOE & CONST. EQUIPMENT

1997 JD 410D tractor loader backhoe, CAH, 4×4, extend-a-hoe, (2) stick control, 91″ front material bucket w/bolt-on cut edge, 30″ rear bucket, 18.4-28 rear tires, 14-17.5 front tires, 7,000 hrs., S/N T0410DG80642

Caterpillar wheel loader bucket, 10′, weld-on cut edge

Tampo sheepsfoot tamper, 9′

Pull-type roller packer, 5′, needs work

Case 580C tractor loader backhoe, cab, heat, 2WD, extend-a-hoe, 24″ hoe bucket, 7′ material bucket

JD 440 loader backhoe, gas, 14.9-26 rear tires, S/N458807

SCRAPERS

(3) Box scrapers, 12′, New

(3) Box scrapers, 10′, New

 

BLADES

Rowse blade, 8′, 3 pt., manual tilt, manual turn

Big Rhino blade, 6′, 3 pt.

4-way heavy duty snowplow blade, 11′, all hyd., w/truck mounts

Front mount blade w/cylinder

140R grader blade, pull-type

(7) Box blades

 

MOWERS

King Kutter rotary cutter, 6′, 3 pt.

Rowse rotary cutter, 4′, 3 pt., 540 PTO, S/N20038

2015 JD MX5 rotary mower, 5′, 540 PTO, chain guards, solid adjustable rear axles, S/NAW3430APR14

 

IRRIGATION

Boss Irrigation traveling gun, 4″ hose w/approx. 1/4 mile of hose on reel, Nelson gun, on transport

Ford FOICI irrigation engine, 7,460 hrs., overhaul at 6,500 hrs.

 

OTHER EQUIPMENT

IHC press drill, 14′, 6″ spacing, S/N620012

Willmar fertilizer tender, 10 ton, hyd. drive, roll tarp

Ag-Chem saddle tank, 200 gal., w/universal mount

Buffalo Scout guidance system, 3 pt., in-cab controls

Single axle semi trailer dolly

Posthole auger, 3 pt.

Stainless steel tank, 1,000 gal., 5 hp. motor/pump, baffles

Dickey John GAC 500XT grain moisture tester

 

LAWN & GARDEN

2010 JD Z925A zero turn lawn tractor, 27 hp. Kawasaki, hydro, 54″ deck, 1,042 hrs., S/NTC925AB010671

2010 JD X534 lawn tractor, 25 hp. Kawasaki gas, hydro, AWS, 54″ deck, 414 hrs., S/NM0X534A051029

2005 JD LX289 lawn tractor, 17.5 hp. Kawasaki gas, hydro, 48″ deck, 597 hrs., S/NM01289A120594

2003 JD X475 lawn tractor, 23 hp. Kawasaki gas, hydro, all wheel steer, 62″ deck, 1,362 hrs., S/NM0X475B020702

1998 Toro 269 lawn tractor, 19 hp. Kohler gas, hydro, hyd. deck lift, 42″ deck, 35″ snowblower, chains, wheel weights, 316 hrs., S/N25558

1993 JD F710 front-mount lawn tractor, 17.5 hp. Kawasaki gas, hydro, 48″ deck, 956 hrs., S/NM0F710X030230

1991 JD LX178 lawn tractor, 15 hp. gas, hydro, 38″ deck, 42″ snowblower, S/NM0L178X011283

Cub Cadet GT 3200 lawn tractor, 25 hp. Kohler gas, hydro, power steering, hyd. deck

lift, 50″ deck, S/N1K057630012

Star yard sprayer, 25 gal., on transport

Fimco spray tank, 15 gal.

ATV sprayer

Garden cart

Snowblower, 6′, 3 pt hitch, 1000 PTO

Craftsman lawn tractor, 30″ deck, S/N15303820135

JD 318 lawn tractor, single stage, deck, snowblower, New starter

 

RECREATION

2009 Polaris RZR170 ATV, ROPS, four stroke, 170cc, 2×4, electric start, automatic

2008 Yamaha TTR50 motorcycle, 50cc, electric start

2006 Polaris Predator 50 50cc, electric start, 2×4, automatic

2012 Arctic Cat ZR120 snowmobile, 120cc

 

SHOP EQUIPMENT

Generator, gas, 4000 watt

Cosy Brand kerosene heater, 19,400 BTU

(2) LP propane heaters

Wire winder

(2) Craftsman 1/2″ drills, w/chargers, cases & (2) batteries

DeWalt circular cordless saw, w/charger, case & battery

Znex 1/2″ impact, w/charger, case & (2) batteries

Znex 3/8″ impact, w/charger & (2) batteries

Extendable ladder, steel

(20) Threaded rod

Shop items: air compressor, Napa battery charger, hand tools, drill press, large vise, nut & bolt bin, chains & binders

Bolt bin, 2’x6′, (74) compartments, double sides

Pallet of misc. tools

Dead man

Hydraulic shop press, 50 ton

Heavy duty tire changer, c/w: 110v 60 hz

Heavy duty wheel balancer c/w: 110v 60 hz

(2) Heavy duty metal work bench w/hanging peg board, 10′, (20) drawers, c/w 40” high hanging peg board, stainless steel drawer panel, metal handles

(2) Air hose reel, 3/8″X50′

Dr. air impact wrench kit, 1″

(4) Welding helmet, solar power

(10) Battery Load Tester

Century 295 AC/DC welder

 

FUEL TANKS

Fuel tank, 1,000 gal., w/pump

Fuel tank, 300 gal., no pump

 

TIRES

(2) Goodyear 18.4-30 tires w/tubes

(2) Goodyear Super Term Grip 54-31:00-26 tires, 16 ply, New

(4) Goodyear 580/90R50 tires

(2) Goodyear 380/85R34 tires

(6) Irrigation tires, 11R24.5 w/rims, used

30.5-32 tires w/10-bolt rims

(4) 725/65R26 tires

(8) 6-bolt implement tires

Trailer tire, 175/80R13, New

(2) 10.00-16 tires on rims

(2) 10.00-20 truck tires on Dayton wheels

(11) 7-14.5 mobile home tires

(4) Packer wheels, 60″ diameter, 30″ wide

(4) 8.25-20 tires, on 10-bolt rims

(4) 18.4-26 combine tires, on 8-bolt JD rims

(2) Goodyear 11.00-16 tires, on 8-bolt rims

(2) 23.1-30 tires, on 10-bolt rims

(2) 23.1-26 tires, on 10-bolt rims

8.25-20 tire, on 10-bolt rim

(2) Maxi-Trac 8.25-20 snow tires, on split rims

(2) Goodyear 18.4-38 Ultra Grip tires

Set of tires chains, for 18.4-34 tires

18.4-38 duals, hub mount

(2) Firestone 12.4-42 tires, 10-bolt rims

(3) Firestone 18.4-38 tires

(2) Goodyear 20.8-38 Dyna Torque tires

 

PARTS

JD Headsight control, for 90 Series corn heads

 (4) IHC suitcase weights

(2) IHC 9-bolt dual extensions, 10″ spacers

IHC misc. fenders, hoods & front nose parts for 56 Series

(2) JD wheel castings, 34″

JD hyd. cylinders, black & green

JD mounting bracket & (2) weights

JD straw chopper, off 4400 combine

(6) May-Wes stalk stompers

Misc. Moline parts

NH corn head adapter plate, fits Drago

Bucket & knives

Autocar, chassis A10264T, 10.00-22 tires, for parts or restoration, S/N50883

(36) Bean head lifters

(12) Fertilizer disc cleaners

Wide fronts, off JD 4020 & 3020

(2) Rock boxes, off IHC 86 Series

Westendorf WL42 loader brackets for JD 30-40 Series or IHC 86 Series

Factory cab w/mounting brackets, for 460 or 560 IH tractor

(2) Forklift fork extension, 72”

Drum tipper

Barrel tipper

Semi-tractor wind breaker, black

Bundle sucker rods, including 1″ diameter & 3/4″ diameter

JD rock box, bottom dump

Set of 4020 rear fenders

JD 953 running gear only, 15″ tires

Gehl 1870 round baler parts, (1) belt w/repair link, (6) Pickup teeth, (3) shrouds, & misc. parts crimping belt

(3) Truck rear gates, for sweet corn

 

FARM SUPPORT & MISC. ITEMS

Mima LP 11-1333 pallet shrink wrapper, 115 volt, 1 phase, w/(6) extra plastic rolls

Set of heavy duty tire chains, fits 16.9-28 tires

(2) Water pumps, 2″, 5-1/2 hp.

(2) polyester lift straps, 10′, 21,200 lb. vertical capacity

Cab wash stand, all metal w/drain pan on stand

(2) Concrete culverts, 6′ diameter, 8′ long

(4) Strobe lights, measure wheel

(2) DeKalb seed bags

Box of misc. cones/parking barricades

Criteria freezer, 10 cubic ft.

Howes scale, 3,000 lbs., antique, stored indoors, working order  

Platform scale

(30) Steel fence posts

Horse eveners

Cream can

(3) Seeder posts

(2) Barn wood planks

(2) Storage containers, 20′, 1 time use

Storage container, 40′

Airplane transport, on casters

Pintle hitch

Camper hitch w/sway bars & (2) jacks

5th wheel hitch

Load equalizing bumper pull hitch

(2) Self dumping hopper, 1-1/2 yard, w/forklift pockets

(2) Self dumping hopper, 1 yard, w/forklift pockets

(2) Self dumping hopper, 2 yard, w/forklift pockets

(2) Self dumping hopper dumpsters, 2 yard, w/forklift pockets

(2) Heavy duty metal table, 29-1/2″x90″

(4) Heavy duty table

(3) Conic bucket, 3/4 yard

(2) Dueling tree shooting target

(2) Gong target

Heavy duty bi-parting wrought iron driveway gate, 20′, (to sell as one pair)

(2) Heavy duty rotary tiller c/w: gear drive, 82″, 3 point PTO shaft w/overrunning clutch

(2) Peak ceiling storage shelter, 20′ X 30′ X 12′,  C/W: commercial fabric, roll up door

(2) Marquee event tent, 16’x22′, c/w: 320 sq. ft., one zipper door, 7-windows, heavy duty frame & fabric

Pagoda party tent, 20’x20′, c/w: side walls, windows and zip door

(2) Heavy duty wood chipper, 3 PTO, c/w: fit 40-70 hp

 

LAUMANN ESTATE & PETE KERBER CONSIGNMENT

PRIMITIVES

(12) Ammo box, steel

(3) Wood barrels, “1947”, (1) lid, (1) strainer

Wood box, on folding stand

(2) Perfection oil heaters, smokeless

Tin pails & buckets assortment

(2) Wooden nail kegs

Cedar box

Peach crates & boxes, wood

(5) Peach baskets

Gas & oil cans

Various consumable cans

Saws & saw blades, antique

(11) Hand wood saws

Primitive hand tools

Antiques, hay knife, hay fork, corn planters

(2) Calf Ween feed containers

(3) Tin signs

Windsor stove, double burner, kerosene

Montgomery Ward oven, cast iron, wood/coal

Monarch combination wood/gas range, needs some parts

Kitchen cabinet & wash tub on stand, steel

Chicken feeders, including galvanized, & waterers

(4) Barn lights, antique

Several wooden boxes

(3) Washboards, antique

Assorted tools, scythes, eveners, pittmans

(5) Boxes of insulators

(2) Hand pumps

Barbed wire, dehorners, nose lead

(4) Metal boxes & wood nail keg

(3) Wire baskets & antique license plates

Old coffee, oil, anti-freeze cans

Misc. items: pump handle, hay spade & saw, Evener catch net

Antiques to include: horse harness, wheel, scalpers, scythe

Box hub caps, stove pipe, galvanized floats

(2) Pumps, no handle, old windmill

Cistern pump, base only

Antique bed pan, (2) pocket watches, ivory elephant, silver thimble, compass, misc. pins, hammer, figurines, old acid tester, etc.

(10) Cream cans

(3) Pump handles

Wood headboard

(2) Metal lawn chairs, reel mower & (4) metal wheels

(4) Antique crates, wood

(3) Gas cans, antique

Tools & wrenches, antique

Antiques to include: hay fork, BB gun, lightning rod, corn planter, tractor seats, hay hooks, wringer, sign, grate

Wooden wagons

Baskets & wood cabinet

 

ANTIQUES & COLLECTIBLES

Childs stroller

Pedal tractor

Antiques, popcorn popper, wringer, ice tongs, pump

(3) Snow ski set

Pulleys & hooks

Mink stole & basket

New Home sewing machine

Games, dartboard, checker board

Baby stroller & dolls, antique

Hocking Valley/Lindsay Bros Junior apple grinder/press

(2) Antique toboggans, antique ice skates

Aluminum washing twin sinks, ironing boards, clothes rack

Antique furnace grids, shelf holders

Victrola Multitone player w/records

Antique containers

Sewing cabinet, sewing machine

Antique lights

Antique baby stroller

WW Army

(2) Metal seats, misc. horse shoes, scale, roof caps, railroad lantern

Antique stove & lantern parts

Antique lawn sprinkler & misc. lawn items

Antique bench seat, 5′

Hiawatha old bicycle

Barbie bicycle & Little Tikes van

Antiques to include: ice cream maker, cream cans, lantern, etc.

Misc. antique kitchen items

 

ANTIQUE & OTHER FURNITURE

Display case, bench, & cabinet, wood

Wardrobe case, antique

Dresser, top cabinet, 3-drawer

Dresser & end table, antique

Dresser, 8-drawer, w/mirror

(4) tables, (1) chair

Antique dresser w/mirror

Dresser, 4-drawrer, w/mirror

(2) misc. metal bed beadboard & rails, wood spindles

Pennsylvania House china hutch, 2-piece, w/light, glass shelves, hardwood 

Table, (4) chairs, folding leaf, hardwood

Table, (6) padded chairs, hardwood

Round table, hardwood

(2) Dressers, 3-drawer, decorative

Table, square, folding leaf, hardwood

Couch and chair, maroon, cloth

Chair, patterned, cloth

Rocker, ottoman, cloth cushions, hardwood

Bench, decorative, hardwood

(2) Chairs, patterned, cloth

Crib/daybed, hardwood

Desk, drawer, hardwood

Area rug, 5-1/2′ x 8′

Grand Legacy area rug, 7-1/2′ diameter, leopard skin, beige

Area rug, 7-1/2′ x 5-1/2′, luxury shag

Bombay bed & post frame, queen, hardwood

Dresser, 3-drawer, hardwood

Desk top lamps including (4) w/woven basket pattern

(6) Floor lamps

(2) Display cases, upright, lighted, glass shelving, hardwood

Clock, wall hanging, large, battery-operated

Mirror, 3′ x 4′, replica barn wood

(4) Portraits, hanging, decorative

Mirror, 3′ x 4′, beveled glass, hardwood frame

Mirror, 1-1/2′ x 3-1/2′, beveled glass, hardwood frame

(7) Mirrors, beveled edges

Mirror, 38″ x 48″, steel copper frame

(3) Sheets of mirrored glass, 42″ x 71″, 55″ x 36″, 41″ x 47″

(5) Hanging lamps, brushed nickel

(15) Lamps, ceiling and wall mount

Chandelier, hanging

Living room set, includes couch, love seat, (2) chairs, cloth

(2) Recliners, patterned, cloth

Serta mattress & box spring, pillow top, queen

Hutch, 4-drawer

Corner desk

Bedroom set, includes dresser, night stand, (2) mirrors

(4) Carved decorative posts, hardwood

(5) Chairs

 

OTHER SHOP, HOUSEHOLD, & MISC. ITEMS

Woodworking & gardening tools

Drill bits, snips, leather punches, misc. tools

Punches, chisels, pliers, clamps

Oil cans, grease gun, misc.

Tubs & pails, galvanized

Black & Decker bench grinder

(4) Vises

Assorted hand tools including sockets, pliers, wrenches, etc.

Rakes, forks, (3) tool boxes

Pulleys, block and tackle, trolleys

Sockets, pliers, wrenches

(3) Heaters, portable, kerosene

Fishing equipment, supplies, & misc.

Childs wagon

(2) Child’s swing seats

New Braunfels smoker/turkey fryer

Misc. doors, windows, screens

Anderson window, 2’x4′

Wheels

(4) Paper containers

About 12 pieces galvanized corrugated steel and 25′ roll flashing

(2) Flotec pumps, submersible

Plastic plants, decorative

Pole saw & garden hoses

Misc. kitchen & silverware

(2) Comforters, king/queen

Pillow, decorative

Cushions & bedding

Christmas & table decorations

Window dressing, blinds/various sizes, decorative drapery rods

Decorative shelves, & foam

Misc. kitchen, w/new food disposal

Misc. lights & silver serving set

Flower pots & vases

Handles & knobs, 30-3/8 colonial spindles, w/misc.

(8) Lamp shades

Misc. glass figurines

Knitting & misc.

(3) Boxes ceramic tile, assorted sizes and boxes

 

AGIRON LITCHFIELD EVENT

320.693.9371

 

 

 

Photo Gallery