Bill and Gary have farmed for over 45 years and have decided to retire. Most equipment is shedded and in good working order. Please note all equipment has had very little use in the last 3 years. The preview is March 13, 14, & 15 from 9:00AM-3:00PM or by appointment. Loadout is Friday, March 16 or by appointment. For information contact Gary at 320.248.0121 or Eric Gabrielson at Steffes Group, 320.693.9371 or 701.238.2570.

TIMED ONLINE AUCTION

 

LOCATION: 8010 Center St., Clear Lake, MN 55319

OPENS: TUESDAY, MARCH 6, 2018

CLOSES: THURSDAY, MARCH 15, 2018 BEGINNING AT 7:00PM

PREVIEW: March 13, 14, & 15 from 9:00AM-3:00PM or by appointment

LOADOUT: Friday, March 16 or by appointment

AUCTIONEER’S NOTE:  Bill and Gary have farmed for over 45 years and decided to retire. Most equipment is shedded and in good working order. Please note all equipment has had very little use in the last 3 years.

 

TRACTORS

2004 Case-IH MX210 MFWD, CAH, buddy seat, 4 hyd., 3 pt., quick hitch, (3) PTO, Trimble Field Manager display, Nav II controller, 252 receiver w/ RTK unlock, front weight bracket, Goodyear 380/85R34 front tires, Goodyear 18.4R46 rear tires w/10-bolt duals, 2,478 hrs., New front tires, single owner, S/N48-4345

1991 Case-IH 7130 MFWD, CAH, powershift, 4 reverse, 4 hyd., 3 pt., quick hitch, 1000 PTO, Firestone 14.9-30 front tires, Goodyear 14.9-46 rear tires w/10-bolt hub duals, 5,609 hrs., S/NJJA0031814, New batteries

1967 IHC 706, wide front, open station, diesel, 2 hyd., 3 pt., dual PTO, flat top fenders, Firestone 18.4-34 tires, 4,435 hrs., S/N39361, New batteries, second owner

1955 IHC 400, narrow front, gas, 2 hyd., 540 PTO, 14.9-35 tires, bad TA, needs work has not run for at least 5 years, S/N24911

1943 IHC H, narrow front, gas, 540 PTO, needs work has not run for at least 5 years, S/N131250

COMBINES & HEADS

1996 Case-IH 2188, AFS, Field Tracker, Y&M mapping, reverser, rock trap, chopper, Maurer hopper top, long auger, rear weights, Goodyear 14.9-46 front tires, 14.9-24 rear tires, 2,356 sep. hrs., 3,115 engine hrs., S/NJJC0193151, second owner

John Deere 6620, diesel, chopper, rock trap, hopper ext., cover, 23.1-26 tires, 2,992 hrs.

2007 Case-IH 2208 corn head, 8×30″, hyd. deck plate, knife rolls, flex shafts, Case-IH 2188 mounts, S/N34367

1996 Case-IH 1020 flex head, 25′, 3″ cut, hyd. fore/aft, flex shafts, S/NJJC0220585

John Deere 220 flex head, off John Deere 6620

GRAVITY WAGONS

Parker 5250 Grain Chariot gravity wagon, brakes, windows, lights, 385/65R22.5 tires

Parker 2600 gravity wagon, on KB1280 4-wheel running gear

J & M 250 gravity wagon, on Minnesota 4-wheel running gear

PLANTING & SEEDING EQUIPMENT

John Deere 7300 MaxEmerge II vacuum planter, 12×30”, wing fold, ground drive, rear lift assist, rear hitch, VacuMeter, seed firmers w/fertilizer tubes, double disc dry fertilizer openers, plumbed for bulk fertilizer, 40 cell corn/bean disks, 250 monitor, markers, S/N655221

IHC 510 grain drill, 12′, 6″ spacing, w/grass seeder, rubber end wheel, Titan 7.50-20 bar lug tires, S/N4490

Concord AST-1100 air cart, 2 cyl. diesel engine, 2-compartment, tri-cycle, 16.5L-16L diamond tread tires, S/NAST-1165

Convey-All BTS240 seed tender, Honda 5.8 hp engine, twin compartment, roll tarp, extra long conveyer, spring ride, on tandem axle bumper hitch trailer, S/N31610

TILLAGE EQUIPMENT

John Deere 980 field cultivator, 30-1/2′, wing fold, tandems across, 9″ knock on sweeps, single pt. depth, 3-bar harrow, hyd. drive pump, 300 gal. pre-emerge spray tank, S/N18178

Sunflower 4211 disc chisel, 20′, 15 shank, 2″ points, tandems on main frame, rock flex disc gangs, 3-bar harrow, S/N4851-086

Massey Ferguson 820 disc, 32′, wing fold, tandems across, S/N904238

IHC 496 disc, 24′, wing fold, tandems on mains only, newer bearings, disc blades, S/N38473

Chisel plow, 14 shank, 3 pt., 2 rank buster bar, gauge wheels

IHC 710 plow, semi-mount, w/packer hitch

(3) Brillion plow packers, 10′, pull-type

ROW CROP EQUIPMENT

Case-IH 1830 row crop cultivator, 12×30″, 3 pt., flat fold, rolling shields, Danish tines, edge-on shanks, (4) gauge wheels

IHC 183 row crop cultivator, 12×30″, flat fold, 3 pt., c-shanks, rolling shields, (2) gauge wheels

IHC 183 row crop cultivator, 12×30″, flat fold, 3 pt., Danish tine, rolling shields, (2) gauge wheels

Harrison row crop cultivator, 6×38″, 3 pt., Danish tine

 

 

POTATO EQUIPMENT

Wil-Rich Dahlman 4040 potato harvester, 4 row, 1000 PTO, pull-type, all belted chain, S/N453642

Dahlman WR210 potato windrower, 2 row, S/NW3002

SPRAYER

Hagie 284 sprayer, 6 cyl. Cummins, 4WD, 90′ boom, set on 30″ rows, (2) 400 gal. tanks, single nozzle, foamer, 460 Raven, Agrimax 340/85R28 tires, 2,792 hrs.

GRAIN HANDLING EQUIPMENT

JLCO automatic batch grain dryer, 240 bu. capacity, 3 phase, working order

SnowCo screener, 5 hp. engine, single phase, on transport, used for corn

Sudenga auger, 71’x10″, high efficiency, low pro hopper, 540 PTO, on transport, S/N48-4345

SnowCo 81-21 auger, 53’x8″, 10 hp., 3 phase, on transport, S/N1451

TRUCKS

Ford F900 tandem axle, Ford inline 6 diesel, 13 spd., double frame, 20′ box, hoist w/extensions, 11R22.5 tires on steel, 373,006 miles, S/N9058

1981 Ford L8000 tandem axle, Cummins, 13 spd., spring ride, LL 22′ potato box, rubber belt unload, wet kit, 22.5 tires on steel

IHC 4700 single axle fertilizer tender truck, DT466, automatic, spring ride, wet kit, Tyler 2-compartment 8 ton fertilizer box, rear unload, tarp, rear hitch, 9:00-20 tires on Daytons, shows 23,153 miles, S/N89098, New batteries

TRAILERS

2001 PJ gooseneck trailer, 20′, beavertail, 15,000 lb., rear ramps, wood deck, (2) 8-bolt axles, 235/85R16 tires w/spare, S/N990110

Donahue implement trailer, 4-wheel

Shop-Built header trailer, 4-wheel running gear

 

 

MISC. FARM SUPPORT ITEMS

Simonsen VT-105P fertilizer tender, 3-compartment

NH3 bar, 12×30″, 3 pt., folding

Ag-Rain pull-type irrigator, 600′ cable

Hose reel for traveling gun, 600′ long

Michigan 75A wheel loader, Waukesha 6 cyl. gas, 13.00-24 tires, needs work has not run for at least 5 years

Honey Wagon 1500, parts only

Bush Hog RZ60 brush mower, 5′, 540 PTO, S/N27305

Danuser posthole auger, 3 pt.

Bale throw rack, steel/wood frame, no running gear

Fertilizer poly tank, 3,000 gal., w/Banjo fittings

(2) Ace poly tank, 1,500 gal.

 

Bill & Gary Kiffmeyer

For information contact Gary at 320.248.0121 or 

Eric Gabrielson at Steffes Group, 320.693.9371 or 701.238.2570

 

 

Photo Gallery