Bill Swanston established the Pavement Marking Division of Swanston Equipment Co. in 1969 and it has become an industry leader, completing projects in 45 states. Their innovative CT-2000 Stripe Eater has been sold to striping companies worldwide. After 48 years, Swanston Equipment Co. has decided to focus on other business interests and is partnering with Steffes Group to offer these well-maintained, job ready assets from the Pavement Marking Division at auction. For information contact Swanston Equipment, Bill O’Leary, 702.281.0004 or Paul Strand, 701.371.7819 or from the Steffes Group 701.237.9173, contact Tadd Skaurud at 701.729.3644 or Brad Olstad at 701.238.0240.

SWANSTON EQUIPMENT CO.

PAVEMENT MARKING DIVISION AUCTION

 

Location:  3450 West Main, Fargo, ND 58103

 

AUCTIONEER’S NOTE:  Bill Swanston established the Pavement Marking Division of Swanston Equipment Co. in 1969 and it has become an industry leader, completing projects in 45 states.  Their innovative CT-2000 Stripe Eater has been sold to striping companies worldwide.  After 48 years, Swanston Equipment Co. has decided to focus on other business interests and is partnering with Steffes Group to offer these well-maintained, job ready assets from the Pavement Marking Division at auction.

 

Hotel accommodations at Holiday Inn Fargo, 3803 13^th Ave S, Fargo, ND.  Ask for the Swanston Equipment preferred room rate or click on the link at the bottom of this page. Parking available auction day near auction site at 3321 4th Avenue S, Fargo, ND.  Please watch for signs. Major equipment begins selling at 10:00 AM.  Live online bidding available on major equipment. 

PAINT STRIPING TRUCKS

2014 Freightliner tandem axle airless paint sprayer, ISL Cummins, Allison 3500 automatic, air susp., P240 Ingersoll Rand air compressor, (2) 600 gallon paint tanks, (2) 3,500 lb. bead tanks, 25 gallon flush tank, (2) Weldon SS suction pumps, (2) Graco Dura-Flo airless pumps, upgraded Epic M7 data logging system, computer w/Epic M7 program, New Epic complete timing system (right/left), up to (5) guns of operations, gun raisers, duster, tandem bead guns, (2) quick pattern switch choice, advance/retard switch, paint/bead off, carriage up/down, (4) paint solid/skip control switches in each controller, operates (7) guns total, (5) Graco airless paint guns, (5) Epic bed guns, David Clark intercom system w/(3) headsets, (2) Panasonic video cameras w/monitor, arrow board, beacons, Motorola SM50 narrow band radio, 60,637 miles, Unit #205

2011 International 7500 tandem axle paint striper, Maxxforce DT, 300 hp., Allison 3500 automatic, P185 Ingersoll Rand air compressor, (2) 450 gallon paint tanks, 25 gallon flush tank, 4,000 lb. bead tank, 500 lb. element tank, (2) Graco Husky feed pumps, upgraded Epic M7 data logging system, New Epic complete timing system (right/left), up to (5) guns of operation, gun raisers, duster, tandem bead guns, (3) quick pattern switch choice, advance/retard switch, paint bead off, carriage up/down, (4) paint solid/skip control switches in each controller, operates (7) paint guns total, (6) Epic paint guns, Axeman Anderson furnace w/Beckett oil burner, (2) SS heat exchangers, (2) Panasonic video cameras w/monitor, David Clark intercom system w/(3) headsets, arrow board, beacons, Motorola CM200 narrow band radio, 11R22.5 tires on steel rims, 84,901 miles, Unit #204

2005 Freightliner M2 single axle shortline epoxy impingement spray truck, Cat C7, Allison 2100 automatic, air susp., P65 air compressor, (3) 65 gal. material tanks, (2) Graco Hydrocat proportioning pumps w/(2) Graco Power-Flo Bulldog air pumps, Axeman Anderson furnace  w/Beckett oil burner, (3) SS heat exchangers, Endisys heat system w/(2) impingement guns and electrically heated lines, push cart, Honda generator, arrow board, beacons, Motorola CM200 narrow band radio, 122,827 miles, Unit # 210, Repairs needed: catalyst is leaking into the heat exchanger allowing Cat into the glycol system, heat exchanger will need to be replaced and flushed out  

2003 Kenworth T-300 tandem axle mix epoxy striper, Cat 3126, Eaton 6 spd automatic, air susp., P185 Ingersoll Rand air compressor, (3) 200 gallon SS material tanks, (2) 3,500 lb. bead tanks, 35 gallon SS flush tank, 4 cyl. Kubota w/90 Series hyd. motor, (2) Graco Hydrocat proportioning pumps w/Viscount II hyd. motors, (3) Graco feed pumps, (3) SS heat exchangers, (3) Graco airless paint guns, (6) Binks bead guns, upgraded Epic M7 data logging system, computer w/Epic M7 program, MB timer system, (2) Panasonic video cameras w/monitor, David Clark intercom system w/(3) headsets, arrow board, beacons, Motorola M1225 narrow band radio, 11R22.5 tires on steel rims, 148,645 miles, Unit #208

1999 Freightliner single axle w/pusher axle paint striper, Cummins ISB, 215 hp., Eaton 6 spd., John Deere 185 air compressor, 500 gallon SS paint tank, 300 gallon SS paint tank, 3,000 lb. bead tank, 40 gallon flush tank, (2) SS heat exchangers, (2) Versamatic 2″ fill pumps, (2) Aro 2″ feed pumps, upgraded Epic M7 data logging system, computer w/Epic M7 program, New Epic complete timing system (right/left) up to (5) guns of operations, gun raisers, duster, tandem bead guns, (3) quick pattern switch choice, advance/retard switch, paint bead off, carriage up/down, (4) paint solid/skip control switches in each controller, operates (7) guns total, (5) Epic paint guns, (5) Epic bead guns, New carriages on center line and edge line, (2) New SS filters on rear of truck, (2) Panasonic video cameras w/monitor, David Clark intercom system w/(3) headsets, arrow board, (9) LED beacons, Motorola SM50 narrow band radio, 179,597 miles, Unit #203

1996 Ford CF 8000 tandem axle static mix epoxy striper, Cummins 8.3-250 diesel, Allison 3050 automatic, spring susp., P185 Ingersoll Rand air compressor, (3) 200 gallon material tanks, (2) 4,000 lb. bead tanks, 25 gallon SS flush tank, 4 cyl. Kubota w/90 Series hyd. motor, (3) Graco Hydrocat proportioning pumps w/Viscount II hyd. motors, (3) SS heat exchangers, (3) 2″ Graco feed pumps, Axeman Anderson furnace w/Beckett oil burner, upgraded Epic M7 data logging system, computer w/Epic M7 program, (3) Graco airless paint guns, (6) Epic bead guns, David Clark intercom system w/(3) headsets, (2) Panasonic video cameras w/monitor, arrow board, beacons, Motorola SM50 narrow band radio, 11R22.5 tires on steel rims, 164,987 miles, Unit #207

1990 GMC Epoxy Longline single axle epoxy striper, 5.8L diesel, IR P185 air compressor, 4 cyl. Kubota diesel, 90 Series hyd. pump, (3) 500 gal. material tanks, 2,000 lb. bead tank, 25 gal. SS flush tank, Axeman Anderson furnace w/Beckett oil burner, (2) Graco Hydracat proportioning pumps w/Viscount II hyd. pumps, (3) heat exchangers, (3) 2″ Weldon feed pumps, David Clark intercom system, arrow board, beacons and Motorola M120 narrow band radio, 141,973 miles, Unit #206, truck runs, striper needs work

1989 Ford Cargo CF8000 single axle paint striper, 7.8L Detroit diesel, Eaton 5106, P185 Ingersoll Rand air compressor, (2) 275 gal. pressurized paint tanks, (1) 3,000 lb. bead tank, 30 gal. flush tank, MB skip timer system, (3) Binks 21 paint guns, (3) Binks 30 paint guns, (2) Panasonic video cameras w/monitor, David Clark intercom system w/(3) headsets, arrow board, beacons, Motorola M120 narrow band radio, approx. 173,456 miles, Unit #201

1996 Ford CF 8000 single axle paint striper, diesel, Allison MD 3050 automatic, Axeman Anderson furnace w/Beckett oil burner, (2) SS heat exchangers, (1) 3,500 gal. bead tank, (2) 330 gal. paint tanks, MB skip timer, David Clark intercom system, (2) 2″ Versa-Matic suction pumps, 30 gal. flush tank, arrow board, beacon, Motorola SM50 narrow band radio, Unit #202, truck not running, parts only

1987 Ford E350 van chassis, 6.9L diesel, automatic, LeRoi Dresser 125 cfm air compressor, MB boiler w/Wayne oil burner, (2) heat exchangers, (2) 40 gal. paint tanks, 1″ air diaphragm pump, 500 lb. bead tank, MP skip timer, (3) Binks 21 paint guns, (3) Binks 30 bead guns, 10 gal. flush tank, pointer bar w/wheel and beacons, 1,544 hrs., 215/85R16 tires, 35,297 miles, Unit #200, truck and air compressor run, for parts

 

PAINT STRIPING MACHINES

Graco Linelazer IV 250 SPS stand-on self-propelled line striping system, 2-gun pressurized bead system w/(2) 120 lb. clear poly tanks, Smart control digital display shows psi, mph, mils-instant average, lineal foot, gallons and mils-total, operates in (3) modes: striping, parking lot and road, Unit #707, S/NBA105

Graco Linelazer GM3500 airless parking lot striper, Honda engine, Unit #705, S/N1

Graco Linelazer GM3500 airless parking lot striper, Honda GX160 engine, Unit #706, S/N2

Titan Speeflo Powerliner 2850 airless parking lot striper, Subaru EX15 motor, 4.5 hp., Unit #708, S/N2

Titan Speeflo Powerliner 2850 airless parking lot striper, Subaru EX15 motor, 4.5 hp., Unit #709, S/N3

Kelly Creswell Model C parking lot striper, 6 gal. tank, 1 gal. secondary tank, 1 paint gun, Troy-Bilt 6 hp. OHV motor, Unit #700, S/N3976

Kelly Creswell HD CT parking lot striper, 6 gal. tank, (1) paint gun, (1) bead tank, Honda 5.5 GT160 engine, Unit #701, S/N6982

Kelly Creswell Model C parking lot striper, 6 gal. main tank, 1 gal. secondary tank, no paint gun, Subaru 6 hp. EX17 engine, Unit #702, S/N1

Kelly Creswell Model C parking lot striper, 6 gal. main tank, 1 gal. secondary tank, (1) paint gun, Subaru 6 hp. EX17 engine, Unit #703, S/N2

Kelly Creswell Model C parking lot striper, has frame, (2) tanks, no engine or air compressor, Unit #704, S/N3

 

GROOVING EQUIPMENT

2011 Kenworth T800 tandem axle MRL line removal/grooving truck, extended day cab, C15 Cat, 550 hp., Eaton 18 spd., AG 400 air susp., 3-610-ADG WO 3240/10302, hydrostatic hyd. drive system, No. 66PCVAC-39-6-PTFE-5K U.S air filtration pulse jet cartridge dust collector, Boss Series 35 air compressor, skip line timing system, David Clark intercom system, Panasonic video camera, (4) 18″ cutting heads, Wanco 25 LED, arrow board, Motorola narrow band radio, 20,000 lb. front axle, 46,000 lb. rear axles, 3:58 rear ratio, 315/80R22.5 front tires, 11R22.5 rear tires on aluminum rims, 76,697 miles, Unit #211

CT-2000 Stripe Eater RJ350 grinder, enclosed cab, John Deere diesel, hydro, 1,135 hrs., Unit #526, S/N89181

CT-2000 Stripe Eater RJ350 grinder, open cab, John Deere diesel, hydro, 3,442 hrs., Unit #527, S/N90080

CT-2000 Stripe Eater grinder, enclosed cab, John Deere diesel, hydro, laser, 817 hrs., Unit #528, S/N405640

CT-2000 Stripe Eater RJ300 grinder, open cab, John Deere diesel, hydro, unknown hrs., Unit #529, S/N86444

CT-2000 vacuum, hyd. drive, on trailer, Unit GV#1

CT-2000 vacuum, hyd. drive, on trailer, Unit GV#8

CT-2000 vacuum, hyd. drive, on trailer, Unit GV#14

CT-2000 vacuum, hyd. drive, on trailer, New, Unit GV#30

 

BOILER TRUCK

2009 International ProStar tandem axle, Cummins ISX, 450 hp., air susp., Eaton 13 spd., heated 16′ van body, Axeman Anderson furnace w/Beckett burner, boiler unit w/floor heat and circulating blower, PTO w/45 gpm pump, (3) Eaton Chlyn S Series 9.7 hyd. motors, 40 gal. hyd. reservoir, (3) Graco Dien 2-epoxy load pumps w/hoses, Generac diesel generator, 12,000 lb. front axles, 40,000 lb. rear axles, 4:33 rear ratio, 11R22.5 tires on steel rims, 599,083 miles, Unit #307

 

CONE TRUCKS

2007 Freightliner M2 single axle flatbed, Cat C7, Allison automatic, spring susp., cone cage, crash pad, special design for setting and picking cones, Trinity 350 TMA, arrow board, beacons, Motorola CM200 narrow band radio, 11R22.5 tires on steel rims, 214,714 miles, Unit #406

1995 Freightliner FL60 single axle flatbed, 5.9L Cummins, Allison automatic, spring susp., cone cage, crash pad, special design for setting and picking cones, Trinity 350 TMA, arrow board, beacons, Motorola M1225 narrow band radio, 11R22.5 tires on steel rims, 241,691 miles, Unit #401

 

HAUL TRUCKS

2006 Freightliner M2 tandem axle, Cat C7, Eaton 9 spd., air susp., 24′ flatbed, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola SM50 narrow band radio, 11R22.5 tires on steel rims, 185,578 miles, Unit #306

2005 Freightliner M2 single axle, Business Class, Cat C7, Allison 2100 automatic, 16′ flatbed, arrow board, beacons, Motorola CM20 narrow band radio, 110,759 miles, Unit #404

2001 Freightliner FL80 tandem axle, Cat 3126, Eaton 9 spd., air susp., 24′ flatbed, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola SM50 narrowband radio, 11R22.5 on steel, 44,506 miles, Unit #303

2001 Freightliner FL80 tandem axle, Cat 3126, Eaton 9 spd., air susp., 24′ flatbed, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola CM200 narrow band radio, 11R22.5 tires on steel rims, 220,836 miles, Unit #304

2001 Freightliner FL60 single axle, Business Class, Cat C7, Allison 2400 automatic, 16′ flatbed and hoist, tilt bed, arrow board, beacons, Motorola SM50 narrow band radio, 70,160 miles, Unit #402

2000 Freightliner FL80 tandem axle, Cat 3126, Eaton 9 spd., air susp., 24′ flatbed, scissor lift, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola CM200 narrow band radio, 11R22.5 tires on steel rims, 78,288 miles, Unit #302

1997 Freightliner FL80 tandem axle, 8.3L Cummins, Eaton 9 spd., air susp., 24′ flatbed w/scissor lift, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola CM200 narrow band radio, 11R22.5 tires on steel, 127,119 miles, Unit #301

1986 International 1754 single axle, IHC 9.0L diesel, 5 spd. manual, 16′ flatbed, No air compressor, 125,360 miles, Unit #209

1985 GMC 6000 single axle, Detroit 8.2L diesel, 5 spd. manual, 16′ flatbed, crash pad, Trinity 350 TMA, arrow board, beacons, Motorola M120 narrow band radio, 218,291 miles, Unit #400

 

SEMI TRACTORS

2002 Kenworth T800, 72″ Aerocab sleeper, 12.7L 60 Series Detroit, Eaton Super 10 spd., engine brake, air slide 5th, cruise, diff lock, Motorola SM50 narrow band radio, aluminum headache rack, 3:70 rear ratio, 11R22.5 tires on aluminum rims, 650,950 miles, Unit #300

1997 Volvo WG64T tandem axle, day cab, 11.1L Detroit Series 60, Eaton 9 spd., air susp., air slide 5th, diff lock, cruise, 152″ WB, HD rear hitch, wet kit, aluminum headache rack, 11R22.5 tires on steel, last recorded mileage was 82,571 miles, Unit #97-01

 

SEMI TRAILERS

1997 Astec step deck trailer, 53’x102″, spread axle, air susp., wood deck, (2) tool boxes between axles, 255/70R22.5 tires on steel rims, Unit #602

1987 Fruehauf steel flatbed trailer, 42’x96″, tandem axle slider, spring susp., wood deck, steel bulkhead, side tool box, 11R24.5 tires on steel rims, Unit #601

1976 Schwartz tandem axle implement trailer, 52’x96″, spring susp., 10′ top deck, 23′ main deck, 9′ hyd. beavertail, flip out outriggers, wood deck, winch, (10) D-rings,  8.25R15 tires, Unit #603

 

BUMPER HITCH TRAILERS

2015 ABU tandem axle trailer, 20’x7′, wood deck, 16′ manual tilting bed, 2-5/16″ ball, rubber mounted lights, hand crank winch, large utility box, 8-bolt wheels, ST225/75R15 tires, spare tire, Unit #612, used to haul groover

2003 Terra Load Lift tandem axle trailer, 16’x76″, wood deck, hyd. 12v hyd. pump and battery, bed raises and lowers, 2-5/16″ ball, rubber mounted lights, frame-mounted winch, missing controller, 6-bolt hubs, ST225/75R15 tires, Unit #606, used to haul groover

2012 tandem axle trailer, 22’x7′, wood deck, (4) frame-mounted tie downs, slide in ramps, 2-5/16″ ball, rubber mounted lights, 8-bolt hubs, ST235/80R16 tires, Unit #609, used for traffic control

1995 Towmaster tandem axle utility trailer, 16’x76″, flip down ramps, (6) side-mounted tie downs, steel deck, 2-5/16″ ball, rubber mounted lights, 6-bolt hubs, ST225/75R15 tires, Unit #604

1987 Shop-built tandem axle trailer, 15’x74″, steel deck, flip down ramps, 2-5/16″ ball, rubber mounted lights, (4) frame mounted tie downs, 6-bolt hubs, ST225/75R15 tires, spare tire, Unit #617, used to haul broom & forklift

1982 Shop-built tandem axle trailer, 16’x6′, steel deck, hyd. raise and lower, 12v hyd. pump, 2″ ball, (4) floor mounted tie downs, rubber mounted lights, 5-bolt hubs, ST175/80R13 tires, Unit #616

1980 Shop-built tandem axle trailer, 15’x76″, steel deck, flip down ramps, 2-5/16″ ball, rubber mounted lights, (4) frame mounted tie downs, 6-bolt hubs, ST225/75R15 tires, spare tire, Unit #613, used to haul groover & forklift

1972 Shop-built tandem axle trailer, 15’x76″, steel deck, flip down ramps, 2-5/16″ ball, rubber mounted lights, (4) frame mounted tie downs, 6-bolt hubs, ST225/75R15 tires, spare tire, Unit #614, used to haul broom & forklift

1982 Shop-built single axle trailer, 72″x35″ between fenders, expanded metal deck, 2″ ball, no lights, 5-bolt hubs, ST215/75D14 tires, Unit #619

 

PICKUPS

2008 Chevrolet 2500HD, Silverado Classic, 3/4 ton, LS, crew cab, long box, 6.0L V8 gas, automatic, 2WD, Jamar Rac plus 1 DMI, beacon, Motorola narrow band radio, approx. 208,129 miles, Unit #111

2008 Chevrolet 3500HD, Silverado Classic, 1 ton, LS, crew cab, long box, 6.0L V8 gas, automatic, 2WD, Jamar Rac plus 1 DMI, beacon, Motorola narrow band radio, approx. 191,737 miles, Unit #112

2008 Chevrolet 2500HD, Silverado Classic, 3/4 ton, LS, crew cab, long box, 6.0L V8 gas, automatic, 2WD, Jamar Rac plus 1 DMI, beacon, Motorola narrow band radio, approx. 243,517 miles, Unit #114

2007 Chevrolet 2500HD, Silverado Classic, 3/4 ton, LS, crew cab, 4-door, long box, 6.0L V8 gas, automatic, 2WD, beacon, Motorola narrow band radio, approx. 145,068 miles, Unit #108

2007 Chevrolet 2500HD, Silverado Classic, 3/4 ton, LS, crew cab, long box, 6.0L V8 gas, automatic, 2WD, Jamar Rac plus 1 DMI, beacon, Motorola narrow band radio, approx. 243,827 miles, Unit #109

2007 Chevrolet 2500HD, Silverado Classic, 3/4 ton, LS, crew cab, long box, 6.0L V8 gas, automatic, 2WD, Jamar Rac plus 1 DMI, beacon, Motorola narrow band radio, approx. 177,309 miles, Unit #110

2007 Chevrolet 2500HD, 3/4 ton, crew cab, 6′ bed, 6.0L gas, auto, 4WD, trailer brake controller, nerf bars, Rhino lining bed liner, LT265/75R16 tires, 251,931 miles, Unit #07-12

2006 Chevrolet 3/4 ton, crew cab, 6′ bed, 6.0L gas, auto, 4WD, trailer brake controller, plastic bed liner, 275/65R20 on MKW custom rims, 151,147 miles, Unit #06-03

2002 Chevrolet 2500HD, 3/4 ton, crew cab, 6′ bed, 6.0L gas, auto, 4WD, trailer brake controller, back up camera, B&W turn over gooseneck ball hitch, LT265/75R16 tires, 189,858 miles. Unit #02-01

2000 GMC 2500, 3/4 ton, reg. cab, 8′ bed, 6.0L gas, auto, 4WD, trailer brake controller, LT245/75R16 tires, 215,758 miles, Unit #00-01

2000 Chevrolet C/K 3500, 3/4 ton, LS, crew cab, long box, 5.7L gas, automatic, 2WD, Tommy lift, Motorola narrow band radio, approx. 207,301 miles, Unit #105, rear pinion bearing repaired

1999 Chevrolet C/K 2500, 3/4 ton, LS, reg. cab, 5.7L gas, automatic, 2WD, Motorola narrow band radio, approx. 237,566 miles, Unit #102

 

SWEEPERS

2001 Broce Broom RJ-300 sweeper, enclosed cab, 3,726 hrs., Unit #552, S/N88129

2001 Johnston 605 street sweeper, 5.9L diesel engine, dual side driver cab orientation, air brakes, Sterling SC 7000 cabover chassis, 32,000 GCWR, 5 Cy box, 6,813 hrs., 14,706 miles, Unit #551, sweeper needs work

MB sweeper, 36″, hyd. lift, truck mounted, New, S/NMB00706

(3) Boxes MB sweeper broom bristles, (1) box is open

 

FORKLIFTS & SCISSOR LIFT

2004 Toyota M 7FGU25 forklift, gas or LP, 4,750 lb., 189″ lift, side shift, pneumatic tires, 5,187 hrs., Unit #581, S/N62161

1999 Toyota M 42-6FGU25 forklift, gas or LP, 4,080 lb., 189″ lift, side shift, pneumatic tires, 5,982 hrs., Unit #577, S/N61728

Clark 237KOF forklift, gas, ROPS, 42″ forks, shows 6,379 hrs., needs carb work, not running, S/NGP12706437237

Scissor lift, 48″x102″, 1,500 lb. cap. 

 

BOBCAT VERSAHANDLER AND SKID STEER LOADER ATTACHMENTS

Bobcat pallet forks, 48″, 72″ carriage, fits Versahandler, S/N29900617

Bobcat truss jib, 12′, fits Versahandler

Erskine 2118 snowblower, 60″, hyd. spout, universal skid steer loader mounts, S/N11893

Progressive Innovations Probagger sandbag filler, 6′, (12) filling chutes, universal skid steer loader mounts

Remlinger screening bucket, 68″, hyd. drive, universal skid steer loader mounts, S/N10058

Bobcat buckets, pin attach, fit Bobcat loader: (3) 68”, (1) 54”

Bobcat concrete mixer, 7-pin connector, machine mounted controls, universal skid steer loader mounts, S/NA01600162

(2) Bobcat 3RC72SB mowers, 3 pt., 72″, 540 PTO, solid rear tail wheel, safety chains, S/NAL1N00207, S/NAL1N00250

Bobcat Brushcat mower, 72″, single motor style, universal skid steer loader mounts, S/NA00802716

2013 Bobcat Brushcat mower, 72″, hyd. drive, universal skid steer loader mount, S/NA00802716

(2) Bobcat angle brooms, 68″, universal skid steer loader mounts, S/N231312282, S/N231311462

Bobcat finish mower, 72″, universal skid steer loader mounts, S/N230400482

Bobcat high volume bucket, 96″, 3/1/4 cubic yard, bolt-on cutting edge, S/N17900314

Virnig combo bucket, 68″, universal skid steer loader mounts, S/N12970

Erskine ejector bucket, 66″, universal skid steer loader mount, S/N12970

Haugen HBA 3 pt. hitch receiver, Cat 2 & 3, S/NH0003514

EZ-Spot-UR multi-purpose mover, barrel, sheet & trailer mover, hyd. cylinder, universal skid steer loader mount

Bobcat attachment for moving auger bits, universal skid steer loader mount

Bobcat sand/salt spreader, 12v spinner, fits in Toolcat bed

(3) Bobcat breaker mounts, for skid steer loader

Bobcat ride-behind platform for MT55, New

Bobcat float kit for V-blade, Part #7102603

(2) Bobcat V-blade adjustable frames, Part #6682000

Steel over the tire tracks, fits Bobcat S750, S/NMES5372

Steel over the tire tracks, fits Bobcat S750 or S770

 

GRINDERS & SAW

Bartel SP8G grinder, Subaru EX13 engine, Unit #726, S/N1606

Bartel SP10 scarifier, 10″ cutting path, Honda GX270 engine, Unit #727, S/N2531

Von Arc VA25S scarifier, 10″ cutting path, Honda GX270 engine, 9 hp., Unit #728, S/N644114

Edco CPM8-9H walk-behind scarifier, Honda GX240, 8 hp., Unit #711, S/N11140

Von Arc VA25S grinder, Unit # 729, S/N2

KutRite KR-8 scarifier, 8″ cutting path, Honda GX160 engine, Unit #731, S/N1

Target concrete saw, Wisconsin 4 cyl. engine, set up for grooving or line removal, 1,034 hrs., Unit #889, S/NCCPSX6505QM06-82-3

 

BLOWERS

Little Wonder LW-9100 HD walk-behind blower, Robin EX27 engine, 9 hp., Unit #751, S/N90100002275

Little Wonder LW-9100 HD walk-behind blower, 10 hp., Briggs & Stratton 13.5, Unit #752, S/N1020603600

Little Wonder LW-9100 HD walk-behind blower, 9 hp., Briggs & Stratton 1450 Intek Series, 10 hp., Unit #753, S/N1020603601

Little Wonder LW-9100 HD walk-behind blower, 9 hp., Unit #754, S/N1020603602

Little Wonder LW-9100 HD walk-behind blower, Honda GX390 engine, 13 hp., Unit #757, S/N91310002178

 

AIR COMPRESSORS

Ingersoll Rand P185WJDU/2003/A air compressor, 185 CFM, 100 PSI, 6,662 hrs., Unit #774, S/N334431UAN229

Ingersoll Rand P185WJDU/1995 air compressor, 185 CFM, 100 PSI, 2,723 hrs., Unit #775, S/N254832UCF296

Vanair Viper air compressor, 80 CFM, 100 PSI, 8 hrs. (not original), Unit #771, S/N30-66332

Vanair Viper air compressor, 80 CFM, 100 PSI, 211 hrs., Unit #772, S/N30-70704

Vanair Viper air compressor, 80 CFM, 100 PSI, 327 hrs., Unit #773, S/N30-68153

Vanair ADBD air compressor, 30 CFM, 100 PSI, Kubota 14 hp. diesel, Unit #777

Kubota air compressor, off of small groover, Unit #776

 

SANDBLASTERS

Clemco 1042 sandblaster, Unit #781, S/N5538

Ace Enterprise Sand All 300A sandblast pot, w/remote on/off air control, Unit #783, S/N785

Clemac 2452 sandblast pot, 600 cap. w/remote on/off air control, Unit #782, S/N2650

 

RETROREFLECTOMETERS

(2) ART Mirolux 30 retroreflectometers, for measuring retroreflection of pavement markings, Unit #851 & #852, S/N1557, S/N1499

 

SPRAY APPLICATORS & CARTS

(3) Century Tool Inc. PS-14 primer spray applicators, Unit #804, #805, #806

Century Tool Inc. PS-14 primer spray applicator, for parts, missing pump and nozzle, Unit #807

Century Tool Inc. motorized tape cart (new), Honda GX160 engine

(2) Century Tool Inc. RTC-2 roller tamper carts, Unit #810, #808

 

OTHER EQUIPMENT

WRT PT15 pull-type pneumatic tire packer, 8-1/2′, S/N115396

Bobcat excavator buckets, (2) 24″ & (1) 36”, frost teeth, fits mini excavator

Bobcat Breaker mounting bracket for excavator

Steel flatbed, 22’x96″, bulk head, LED lights 

Steel flatbed, 17-1/2’x96″, customized for cone truck w/pedestals for cone person, 4′ front bed, 13-1/2′ rear bed, side platforms for both sides 

Asst. fuel service tanks, 50-110 gallons, 12v & hand pumps

 

SHOP EQUIPMENT

(2) Budgit shop crane hoists, 2 ton, 1 hp., 230v, 1 phase

Airco 3DDRS224-C stick welder, 300 amp w/leads, 240v, 3 phase, S/NHD707310

Miller AEAD-200 LE portable gas welder/generator, Onan gas engine, S/NJE819067

Reddy Heater kerosene heater, 60,000 BTU, 110v

Toolboxes

Ladder, 6′, New 

 

TIRES

(3) P195/70R14 tires 

ST175/80R13 tire 

(2) Bobcat 10-16.5 tires, used

(4) Galaxy 10-16.5 tires on Bobcat 5-hole rims, New

(2) Bobcat 12-16.5 tires, used

(4) Carlisle 27×10.50-15 tires, fits Toolcat

(4) Bobcat 12×16.5 tires, used 

(4) Bobcat 10-16.5 tires, used

(2) Bobcat 12.4-24 & (2) 7-16 R1 tires & rims, fits Bobcat 235 or 225 tractor, New

(4) Bobcat 12-16.5 tires, used

(2) Bobcat 14.9-24 & (2) 10-16.5 tires & rims, fits Bobcat 400 series tractors, New

(4) Bobcat 10-16.5 tires on 8-hole rims, used

(4) Samson 14.17.5 tires on 8-hole rims, used 

(4) Titan 27×10.50-15 tires on 6-hole rims, fits Toolcat, used

(4) Solid flex tires on 8-hole rims for midsize Bobcat, used

(2) Kenda 25×10.00-12 & (2) 25×11.00-12, fits UTV, no rims, New

(4) Kenda 25×11.00-12 tires, fits UTV, no rims, New

(4) Bobcat 5.70-12 tires on 5-hole rims, fits S70 Bobcat, New

Carlisle 25×8.50-12 NHS tire

(4) Indus 7.50-16 trailer tires on 8-hole rims

(2) Carlisle LT235/85 R16 trailer tires on 8-hole rims

(1) Crosswind ST235/80 R16 trailer tire on aluminum 8-hole rim

(4) Bobcat 12-16.5 tires on rims, used

(4) Carlisle 25×8.50-14 tires on rims, fits 200 Series tractor, New

 

PARTS & SUPPLIES

Asst. aluminum sheets

(2) Arrow boards, aluminum, New 

DOT DH-1000 sign, S/N513674

Traffic control signs

Barrel tipper

(36) Barrier barrels

(2) Bead tanks pressurized, New 

Bead tote traps, 4’x4’x4′ 

Asst. traffic cones

Attenuator, truck-mounted, for parts only

Asst. gravel box cylinder, tank, hinge and pumps for gravel boxes

(4) Solid tires for CT 2000 12″ grinder head

12″ grinder head and box, for CT 2000

Large material tank for CT 2000 vacuum, New

(3) Hot tape torches, New

Hyd. motors from #211 groover truck

Paint mixing unit, shop-built, needs engine

Approx. (6) paint pumps, need rebuilding 

Paint tank for black paint, used for airports

Air up/down tag axle, dual 11R22.5 tires, 90% on (4) aluminum rims, 34″ frame spacing

(4) Tommy gates

Transmission jack

Attenuator, truck mounted, missing side panels 

Water pumps

Boyd’s Welding 16 gal. aluminum fuel tank, 24″x12″x14″, New

 

MISC. ITEMS

Exterior lights for building

Locks for building

Office desk

White office job board

 

SWANSTON EQUIPMENT CO.

Bill O’Leary, 702.281.0004 or Paul Strand, 701.371.7819

or from the Steffes Group contact

Tadd Skaurud at 701.237.9173 or 701.729.3644 

Brad Olstad, 701.237.9173 or 701.238.0240

 

Hotel Services

Holiday Inn Fargo

3803 13th Ave S

Fargo, ND 58103

Check In:  3PM  /  Check Out:  11AM

“Swanston Equipment” Group Booking Rate for April 24th & 25th

Click Here for Swanston Equipment Preferred Room Rate

 

 

Photo Gallery