Online Manure Pumping & Handling. Steffes Group Litchfield Office 320.693.9371

MANURE PUMPING & HANDLING ONLINE AUCTION

 

OPENS: MONDAY, AUGUST 12

CLOSES: TUESDAY, AUGUST 20

 

MANURE BOAT

PCE 4010 WIC manure boat, auto steer, Krohne flow meter, light spd., John Deere 9.0L w/924 hrs., Cornell 10NNT White Iron pump w/complete rebuild at 900 hrs., includes trailer, new floats

 

MFWD TRACTORS

2008 Case-IH 305 Magnum MFWD, powershift, left hand reverser, 4 hyd., 3 pt., quick hitch, all PTO sizes, front fenders, full set of front weights, 1 set of rear inside weights, 480/70R34 front tires w/duals, 520/85R46 rear tires w/duals, 9,210 hrs., S/NZ7RZ07060

2008 Case-IH 305 Magnum MFWD, powershift, left hand reverser, 4 hyd., 3 pt., quick hitch, 1000 PTO, front fenders, full set of front weights, 1 set of rear inside weights, 480/70R34 front tires w/duals, 520/85R46 rear tires w/duals, 9,423 hrs., S/NZ7RZ03255

 

SPREADERS

2012 Tebbe HS180 litter/lime spreader, John Deere rate controller, Griffith Elder scale & display, LED rear light package, rear axle steer w/brakes & suspension, tractor ball hitch, 800/45R26.5 tires, completely rebuilt prior to Fall 2017, $1,000 in new parts, S/N25320

Meyers 540 Equalizer tandem axle manure spreader, 540 PTO, twin vertical beater, double auger, 16.5L-16.1 tires

 

MANURE TANKS

2014 Houle 9500 quad axle manure tank, 1000 RPM, constant velocity PTO shaft, Krohne flow meter w/readout (new Fall of 2018), hyd. dump basket, Houle toolbar w/covering blades, front axle lift, 725/65R26 tires, new hitch fall in 2018, toolbar needs some work before going to the field

2008 Houle 7300 tri-axle manure tank, 7,300 gal., under carriage rebuilt summer of 2018, new kingpins, king pin holders & hub knuckles, new wheel bearings, axles & (2) lift cylinders, used spring of 2019

Jamesway 7200 TD-6000 tri-axle liquid manure tanker, large 1000 PTO, front & rear steerable, 5-post applicator double disc covering wheels, 3″ twists, spring cushion C-shanks, surface applicator option, 28L-26 diamond tread tires, S/N529

1980 Trailers Unlimited manure transportation system, 9,500 gal., aluminum, 3,000 gpm pump, 8″-10″ boom, hyd. dump bone catcher, in-tank agitation, anti-spill trough, all control is operated from the ground

Fruehauf manure transportation system, 6,500 gal., 3,000 gpm rear mounted pump, 8″-10″ boom, hyd. bone catcher, anti-spill through, all controls operated from ground, new baffles, new never used

 

COMPRESSOR

1997 Ingersoll Rand 1200 air compressor, 1200 CFM, M11-C335 Cummins, 10.8L, 125 psi max pressure, (3) air filters, (2) 8D-MHD 1400CCA Interstate batteries, on 4-wheel trailer (20 mph max), hrs. meter does not work, 3,500+ hrs., starts & runs, serviced after last use

1979 IR 110 portable air compressor, 671 Detroit diesel engine

 

AGITATORS

Houle agitator, 42′, 540 RPM, LT265/75R16 tires, has not seen much use

Farmstar agitator, 24′, 18″ prop, 3 pt., 540 PTO

2009 Houle lagoon pump, 56′, 1000 PTO, w/wall walkers, well maintained

2008 Houle lagoon pump, 52′, gear box rebuilt 2 yrs. Ago, no clamps or fittings includes

2004 Houle lagoon agi-pump, 42′, 1000 PRM, outriggers, radio remote control

2003 Houle lagoon agi-pump, 42′, 1000 RPM, outriggers, S/N1008-015-42

 

TOOLBAR

PCE VTI toolbar, 35′, vertical tillage injection, 3 pt. w/9-1/2′ wings, 14 port manifold, 8″ plumbing to the manifold, 3″ to the row units, row units on 30″ centers, new bearings, & paint, coulters in excellent condition, S/NAPP148

Shop-Built toolbar, 30′, 11 shank on 24″ centers, 3 pt., hyd. distributor w/15 ports, Krohne flow meter, sweep inject, 6″ pipe, Wil-Rich shanks, 3-wing chopper, Pig launcher

Hydro toolbar sweep inject, 24′, 13 shank on 24″ spacing, hyd. wing fold, 3 pt., swing pipe, Krohne flow meter w/readout, pig launcher, 4-1/2″ plumbing to distributor, Bazooka Farmstar FCTB8F24-HD manure tank toolbar, 12-1/2′, (8) unit VTI toolbar, 24″ spacing, folding wings

1999 Hydro toolbar sweep inject, 13 shank on 24” spacing, hyd. wing fold, 3 pt., hinged swing pipe, Krohne flow meter w/readout, pig launcher, 4-1/2′ plumbing to distributer

 

DRIBBLE BAR & FOLDING BAR

LMS dribble bar, 40′, 3 pt., 15 port manifold, 8″ plumbing to the manifold, 3″ off manifold, 12″ spacing on drop hoses, 24″ drop hoses, needs new hoses off manifold

2011 DSI folding bar, 8 row, 6″ feed hose, double frame, gauge wheels, 8″ sweeps, waved coulters, 1-1/4″ linkage w/cylinders, complete

 

INJECTORS

(5) Balzer unit double disc injector, 6″x6″ bar, leaf spring style, down pressure springs

Nuhn chisel point injector, 5 row, 4″x6″ bar, S-tine shanks, opening coulters, mounting brackets, manifold, gauge wheels, extra row units on pallet

Nuhn tapered disc injector, 5 row, 1-1/2″ T-bar bolts, 6″ feed, 3 leaf springs

Nuhn tapered disc injector, 5 row, 1-1/2″ T-bar bolts, 6″ hose, complete

Houle double disc injector, 4 row

(5) Balzer unit disc injector, 4″x4″ bar

(6) Unit sweep injector, 4″x4″ bar, Balzer manifold, dual gauge wheels

Houle double disc injector, 3 unit

Cadman pull-type applicator, 32′, 24″ spacing, 8″ sweeps, 6″ swing pipe, (16) Dietric row units, vogelsang manifold

2016 VTI liquid manure applicator, 45’x30″ spacing, 3 pt., 3 section, (15) knife, VTI row units w/hyd. depth control, wavy coulters measure 23″ to 25″, floating 2 blade wavy disc coulters

 

LOAD STAND

Load stand, 35′ long, 8″

Balzer loadout pipe, on transport

Drive over (pig through), road crossing

 

PUMPS

Booster pump w/John Deere 8.1L engine, manual throttle, Cornell 17″ white iron pump (4,517mp hybrid), 8″ inlet & outlet, hyd., will run a Pit Pal, 350 gal. fuel tank, includes trailer, 6,500-7,000 hrs. (hr. meter doesn’t work), late 90′ model, pump rebuilt in 2016, no clamps, hoses or adapters

Booster pump, John Deere 6.8L industrial engine, 3 pt., Cornell 4414T-F18DBK pump (4″ in & out), air compressor, fuel tank, radio controlled engine rev, idle down & shut off, pig launcher, showing 4,074 hrs., new engine at 2,496 hrs.

2013 Nuhn pump, 9′, 8″ pipe, manual hyd. controls for stir spout, main gear box at bottom of pump is oiled off the oil reservoir at the top, maintained regularly

Cornell 4NHTB-EM18DBK manure pump, 8″ inlet/outlet, s/n: 190699 17.50, w/ John Deere 6090HF485 diesel engine, 224-298KW @ 2200 RPM, s/n: RG6090L038584,  on 2011 PJ tandem axle bumper pull flatbed, 7,000 lb axles, 16+2′ x 84″, 2 ramps, pintel hitch, (2) DeeZee 48″x24″x24″ diesel tanks (Computer System Not Included)

Balzer buckhead horizontal transfer pump, 18.5×8.5-8, 1000 PTO, S/N870-1013, New

Balzer buckhead horizontal transfer pump, 18.5×8.5-8, 1000 PTO, 871-1013, New

Houle vertical pit pump, 9’x9″, S/N753-B9

2009 Houle vertical pit pump, 8.5’x6″, S/NCAH4-0904-517

Houle vertical pit pump, 8’x8″, twin nozzle, on transport cart

Balzer V-6 vertical pit pump, 6″, S/N420-110

Doda pump, 12′, 1000 PTO, (2) nozzle ports, PTO shaft & nozzles not includes

(4) Pioneer pump, 10″x8″

Cornell 4414T-F18DBK pump, 4″ in & out

Balzer pit pump

Dota pull-type pump, 540 PTO, hand primer & 12v primer

Houle manure tank pump, S/NCAF1-1000990

 

HOSE CARTS

2014 PCE HC16 hose cart, hyd. drive w/dual Orbit motors, holds 12 length of 7″ hose, (hose & fittings no included)

PCE TTR20 tandem axle hose cart, hyd. drive w/dual Orbit motors, hyd. turn table, heavy duty axles, 700/50R22.5 tires, holds 16 lengths of 8″ hose

Cadman 5500 hose reel, walking tandems, 5.1 drag hose (hose not included)

Cadman 6000 hose caddy, hyd. drive, hold (8) 6″ hoses

Hydro hose cart, hyd. drive, 425/65R22.5 tires, holds 10 lengths of 6″ hose

Hydro hose cart, hyd. drive, 425/65R22.5 tires, holds 10 length of 6″ hose, (hose & fitting not included)

Shop-Built tandem axle hose cart, hyd. drive, holds 1 mile 6″ hose, 425/65R22.5 tires, modeled after Hydro

2017 Hydro hose humper, moves up to 10″ hose

 

HOSES

(3) Ora-Flex mainline hoses, 660′ each, 8″, (1) hose has mender & skid marks & (1) hose has mender, owner states in good working order, last used in June

(4) Key Hose lengths 7″, Red Key mainline hose, includes 658′ no splices, 657′ no splices, 576′ no splices, 680′ 1 splice

(4) Key Hose lengths 7″ Red Key mainline hose, includes 659′ 1 splice, 659′ 2 splices, 601′ 1 splice, 570′ 3 splices

(4) Oroflex lengths 7″ Black Oroflex mainline hose, includes 663′ no splice, 657′ no splice, 645′ no splice, 620′ no splice

(4) Oroflex lengths 7″ Black Oroflex mainline hose, includes 655′ no splice, 654′ no splice, 645′ no splice, 640′ no splice

(4) Oroflex lengths 7″ Black Oroflex mainline hose, includes 655′ 2 splices, 653′ 2 splices, 620′ 1 splice, 601′ 2 splices

(4) Oroflex lengths 7″ Black Oroflex mainline hose, includes 650′ 1 splice, 644′ 1 splice, 640′ 1 splice, 604′ 1 splice

(5) Length 6″ mainline to include 555′ no splices, 551′ no splices, 495′ no splices, 451′ no splices & 204′ no splices

(5) Length 6″ mainline to include 579′ 1 splice, 565′ 1 splice, 524′ 1 splice, 400′ 1 splice, 191′ no splice

 

PARTS

(15) VTI hydra flex contour king swivels, 10″ vertical travel, 30 degree swivel left & right, 24″ spacing or 30″ spacing available, off a 6×6 bar, each swivel has 2 rows (total of 30 rows), each row has a double disc closing system behind each row

(6) Dietrich injector shanks, Series 70 shanks, auto reset, never used

(6) Dietrich injector shanks, Series 50 shanks, auto reset, used

Pumps & PTOs

Krone 0101D flow meter, w/IFC head unit

Pallet of Nuhn 5 unit manifold

Pallet of Nuhn linkage w/cylinders

Pallet for anti-foam funnel, 30″x30″ inlet

 

 

 

Steffes Group Litchfield Office

320.693.9371

Photo Gallery