ABSOLUTE RETIREMENT
CONCRETE CONSTRUCTION AUCTION
?
LOCATION:? 17749 Hwy. 13, Wahpeton, ND. From Wahpeton, ND, 3 miles west on Hwy. 13; or from I-29 Exit 23, 7 miles east on Hwy. 13.
AUCTIONEER?S NOTE:? After 18 years in business, Doug and Cate have decided to retire and offer this excellent, late model line of trucks, and equipment.? Most pieces have been purchased new with complete service records, and stored inside when not in use.? Auctioneers may run two rings.? For preview or inspection, please contact Doug Bladow, 701.640.0437.? Major equipment begins selling at 11:00 AM.? Live online bidding available on major equipment. Loading will be available for two weeks after the auction.
Pre-Registration will be available at the auction site Tuesday, February 10 from 9:00AM – 4:00PM at the auction trailer
GRAVEL TRUCKS
2015 Peterbilt 365, MX13 Paccar, 455 hp., Allison automatic, engine brake, Chalmers susp., quad locking axles, (3) air up/down steerable pushers, 18′ Oxbody gravel body with Maxle Super Dump axle, 4:30 ratio, 425/65R22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 6,534 miles
2015 Peterbilt 365, MX13 Paccar, 455 hp., Allison automatic, engine brake, Chalmers susp., quad locking axles, (3) air up/down steerable pushers, 18′ Oxbody gravel body with Maxle Super Dump axle, 4:30 ratio, 425/65R22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 8,636 miles
2007 Kenworth T800 tandem axle Super Dump, C13 Cat, 470 hp., Allison automatic, engine brake, Chalmers susp., triple steerable pusher axles, 18′ Strong Industries gravel box, 250″ WB, 4:30 ratio, 425/65R22.5 front tires, 215/75R17.5 pusher tires, 11-22.5 rear tires, aluminum rims, 311,100 miles
2006 Peterbilt 379 tandem axle, C13 Cat, 430 hp., 8LL trans., quad locking axles w/air up/down steerable pusher axle, engine brake, Air Trac air ride, 16′ Bibeau gravel box, full locker, 240″ WB, 3:90 ratio, 385/65R22.5 front tires, 255/70R22.5 pusher tires, 295/75R22.5 rear tires, aluminum rims, 50,916 miles, single owner
1998 Peterbilt 378, 3406 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, 16′ gravel box, pintle hitch, rear hyd., 3:55 ratio, 11-24.5 tires, front aluminum and rear steel rims, 850,500 miles, recent engine OH, used to pull pup trailer
SLEEPER SEMI TRACTOR
2007 Peterbilt 386, tandem axle, 70″ sleeper, double bunk, C15 Cat, 475 hp., 18 spd., engine brake, Peterbilt flex air ride, air slide 5th, cruise, dual aluminum tanks, diff lock, 3:36 ratio, 11R22.5 tires, aluminum wheels, 602,340 miles
NON-SLEEPER SEMI TRACTORS
2007 Kenworth W900 tandem axle, factory day cab, C13 Cat, 470 hp., 13 spd., engine brake, AG380 air ride, SS air cleaner, dual exhaust, dual aluminum fuel tanks, 1-line wet kit, 220″ WB, 11-22.5 tires on aluminum rims, 200,740 miles, single owner
2005 Peterbilt 385 tandem axle, day cab, C13 Cat, 410 hp., 10 spd., engine brake, Air Trac air ride, air slide 5th, dual exhaust, dual aluminum tanks, full locker, 3:70 ratio, 285/75R24.5 tires, aluminum rims, 370,894 miles
2005 Peterbilt 379 tandem axle, ext. hood, day cab, C15 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, air slide 5th, dual exhaust, air up/down steerable pusher, diff lock, 222″ WB, 3:55 ratio, 11-22.5 front tires on aluminum, 255/70R22.5 pusher axles tires on aluminum, 11-22.5 rear tires w/aluminum outside rims, 602,710 miles
2005 Peterbilt 379 tandem axle, day cab, C13 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, dual exhaust, dual air cleaners, dual fuel tanks, 2-line wet kit, air up/down steerable pusher axle, 260″ WB, 3:42 ratio, 11-22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 530,410 miles
2005 Peterbilt 379 tandem axle, day cab, C13 Cat, 430 hp., 13 spd., engine brake, low air leaf air ride, air slide 5th, air up/down steerable pusher axle, diff lock, dual exhaust, 244″ WB, 3:70 ratio, 11-22.5 tires on aluminum rims, 370,595 miles
2001 Peterbilt 378 tandem axle, day cab, C12 Cat, 410 hp., 13 spd., low air leaf air ride, air up/down steerable pusher axle, dual exhaust, dual fuel tanks, aluminum headache rack, 2-line wet kit, 244″ WB, 3:55 ratio, 11-22.5 front & rear tires, 255/70R22.5 pusher tires, aluminum wheels, 718,886 miles
2001 Peterbilt 357 tandem axle, day cab, C12 Cat, 430 hp., 13 spd., engine brake, air ride, air slide 5th, 2-line wet kit, air up/down steerable pusher axle, 224″ WB, 4:11 ratio, 285/75R24.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 519,660 miles, complete New engine
1998 Peterbilt 379 tandem axle, day cab, 3406B Cat, 435 hp., 13 spd., engine brake, air ride, air slide 5th, dual exhaust, 2-line wet kit, 220″ WB, 3:55 ratio, 11-22.5 tires, outside aluminum rims, 938,600 miles, complete engine OH recently
CONCRETE MIXER TRUCKS
2010 Peterbilt 365, ISM Cummins, 350 hp., 8LL spd., Chalmers susp., quad locking axles w/air up/down steerable pusher axle, full locker, Con-Tech Bridgemaster 11 yd. mixer, 4:78 ratio, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 69,660 miles, single owner
2006 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/air up/down steerable, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel, 142,700 miles, single owner
2005 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/air up/down steerable pusher axle, full locker, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 115,390 miles, single owner
2005 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/steerable pusher axle, full locker, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel, 137,300 miles, single owner
1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, diff lock, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 151,500 miles
1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, diff lock, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 173,000 miles
1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down steerable pusher axle, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 157,800 miles
1995 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, 5:29 ratio, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tire on aluminum rims, 11-22.5 rear tires on steel rims, 166,000 miles, New drum, gear box & hyd. pump
PUMPER & CONVEYOR TRUCKS
2001 Mack tandem axle pumper truck, E7 Mack, 9 spd., air up/down steerable 3rd pusher axle, spring ride, 32M Zboom, custom-made insulated pipe wraps, 220″ WB, 425/65R22.5 front tires, 385/65R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 1,317 pump hrs., 4,105 engine hrs., 112,140 miles, new pipe in 2008, single owner
Approx. 400′ asst. size extra pipe, hose, & clamps for Mack pumper truck
2007 Sterling Condor tandem axle cabover, C13 Cat, 430 hp., Allison automatic, Haulmax susp., Putzmeister TB80 conveyor, feeder belt replaced 56 hrs. ago, 856 total belt hrs., 258″ WB, outriggers, self-contained washer, 425/65R22.5 front tires, 11-22.5 rear tires, aluminum wheels, 30,200 miles, single owner
2007 Sterling Condor tandem axle cabover, C13 Cat, 430 hp., Allison automatic, Haulmax susp., air up/down steerable pusher axle, Putzmeister TB110 conveyor, 1,904 belt hrs., outriggers, self-contained washer, 298″ WB, 425/65R22.5 front tires, 275/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 45,000 miles
2000 Ford F750 single axle, 3126 Cat, 6 spd., spring ride, Putzmeister TB50 conveyor, 1,140 belt hrs., concrete hopper, self-contained washer, 264″ WB, 11-22.5 tires, outside aluminum rims, 87,900 miles, single owner
BELLY & SIDE DUMP, & PUP TRAILERS
2011 R-Way quad axle belly dump, 51′, tarp, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner 1E9BF51H8BS448339
2009 R-Way quad axle belly dump, 51′, tarp, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner
2009 R-Way quad axle belly dump, 51′, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner
2007 Sidump’r SDR325 tri-axle trailer, 36′, air ride, 11R22.5 tires on steel rims, single owner
2005 Sidump’r SDR325 tri-axle trailer, 36′, air ride, air load scale, 11R22.5 tires on steel rims, single owner, New main cyl.
2003 Midland SK2100 tandem axle pup trailer, 14′ gravel dump box, 19-1/2′ pole, spring ride, 11-24.5 tires on steel, single owner
DROP DECK & RGN TRAILERS
2011 Jet drop deck, 53′, 5′ beavertail, flip ramps, spread axle, air ride, dump valve, 5′ aluminum box, sliding winches, 255/70R22.5 tires on steel rims, single owner
2007 Jet drop deck, spread axle, 53′, 5′ beavertail, flip ramps, air ride, dump valve, sliding winches, 5′ aluminum box, 255/70R22.5 tires on steel rims, single owner
2008 Terex Load King RGN tri-axle trailer, non-ground bearing, 55 ton, air ride, 26′ well, hyd. detach, 102″ swing out, air up/down (3) axles, plumbed for stinger, no pony motor, custom-built fenders, 255/70R22.5 tires on steel rims, single owner
WHEEL LOADER
2005 Caterpillar 950G II wheel loader, heat, A/C, ride control, engine block heater, 4.5 yd. bucket, VEI scale, 23.5-25 tires, 4,585 hrs., S/N0950GJAYL02067
Large hopper for Putzmeister telebelt, custom-built for wheel loader w/vibrator
DOZER
2007 Caterpillar D6K LGP dozer, 6-way 11′ blade, AccuGrade ready, 30″ pads, 3,613 hrs., S/NCAT00D6KEDHA00309
ARTICULATING DUMP TRUCK
2002 Caterpillar 730 articulating dump truck, C11 Cat, 300 hp., heat, A/C, engine block heater, Michelin 750/65R25 tires at 90%, 5,582 hrs.
EXCAVATOR & ATTACHMENTS
2008 Caterpillar 320DL excavator, 2 spd. travel, engine block heater, aux. hyd. on boom, hyd. quick coupler, 48″ heavy duty bucket w/teeth, 1,686 hrs., single owner, S/NCAT032DDJPHX01186
2010 Solesbee hyd. thumb for 320 excavator, single owner
Smooth cutting bucket, 72″, for 320DL excavator, single owner
MINI EXCAVATORS & ATTACHMENTS
2011 Caterpillar 305.5D CR mini excavator, enclosed cab, heat, A/C, aux. hyd., 24″ bucket, long stick, 2 spd. travel, mechanical coupler, 338 hrs., single owner
Bucket, 36″, for Caterpillar 305.5D CR
2005 Caterpillar 305CR mini excavator, open station, aux. hyd., 24″ bucket, 2 spd. travel, mechanical quick coupler, 1,651 hrs., complete New engine w/115 hrs., S/NCAT00305V0GT01673
2009 Caterpillar H550 hammer concrete breaker, custom-built metal rack, fits 2005 Caterpillar 305 mini excavator, single owner
BOOM LIFT
2011 JLG 450AJ Series II boom lift, diesel, 45′, 4WD, cold start, generator, 33-15.5-16 tires, 726 hrs., S/N300146904
TRACTOR LOADER BACKHOE
2003 Caterpillar 420D tractor loader backhoe, 4WD, cab, heat, extend-a-hoe, 1.4 yd. bucket, 30″ bucket, 19.5-24 tires, 340/80R18 tires, 1,812 hrs., S/NCAT0420DPFDP09997
TRACK SKID STEER LOADERS & ATTACHMENTS
2013 JD CT323D track skid steer loader, cab, heat, engine block heater, foot controls, 2 spd. travel, quick tach, 84″ bucket, 389 hrs., single owner, S/N1T0323DBHDG240934
2013 JD CT323D track skid steer loader, cab, heat, engine block heater, foot controls, 2 spd. travel, quick tach, 84″ bucket, 338 hrs., single owner, S/N1T0323DBCDG240967
(2) Small hoppers for Putzmeister telebelt, custom-built for skid steer loaders
2000 Worksite Pro HB50 hyd. concrete breaker, skid steer loader mount, single owner
McMillen posthole auger, skid steer loader mount, flat-face hyd. couplers w/15? bit
24″ bit for hyd. posthole auger
Virnig rock grapple, 84″, 6″ space, 2 hyd. cyl. on grapple, skid steer loader mount, single owner
Skid steer loader snow bucket, 6′
(2) Sets pallet forks w/backrest, for skid steer loaders
Pallet forks, for skid steer loader
(3) Quick tach hitch movers, for skid steer loaders
?
PACKERS
1998 Caterpillar CS433C smooth drum roller packer, 66″ drum, vibrator control, 14.9-24 tires, 1,975 hrs., S/N5HK65166
1996 Caterpillar CP433C sheep foot roller packer, EROPS, vibrator control, leveling blade, 66″ drum, 14.9-24 tires, 2,614 hrs., S/N5HK31094
2012 Hamm HD12VV smooth roller packer, double smooth 48″ drum, center lift point, 92 hrs., single owner, S/NH2002602
2012 Hamm HD12VV smooth roller packer, double smooth 48″ drum, center lift point, 121 hrs., single owner, S/NH2002597
2012 Hamm HD12VV smooth roller packer, double smooth 48″ drum, center lift point, 144 hrs., single owner, S/NH2002128
ROBOTIC WHEEL POLISHER
2013 VIS robotic wheel polisher, 480v, 3 phase, 293 hrs.
OTHER TRUCKS
2007 Peterbilt 335 single axle, C7 Cat, 330 hp., 10 spd., engine brake, spring ride, diff lock, 14′ Curry Supply mechanics service body, Autocrane Titan Model 10006H crane, hyd. outriggers, 275 gal. fuel tank w/high output pump & hose reel, Bobcat welder/generator w/95 hrs., hyd. drive air compressor, complete set mechanics tools, 4:78 ratio, 11-22.5 tires, aluminum outside rims, 6,395 miles, single owner
2000 Peterbilt 357, C12 Cat, 395 hp., 8LL trans., engine brake, quad locking axles w/air up/down pusher axle, 22′ flatbed, IMT 52′ knuckle boom crane, max. 10,000 lb. lift, pintle hitch, (2) toolboxes, 4:11 ratio, 385/65R22.5 front tires on aluminum rims, 11-22.5 rear tires on steel rims, 40,450 miles, single owner
1998 Peterbilt 357 tandem axle water truck, M11 Cummins, 330 hp., 8LL trans., Chalmers susp., 232″ WB, 4,000 gal. water tank, front, side, & rear sprayers, hose reel on back, 5:38 ratio, 11-22.5 tires on steel, 425/65R22.5 tires on aluminum, 131,000 miles
1990 Peterbilt 379 single axle, 3176 Cat, 325 hp., 13 spd., air ride, SS air cleaners, dual aluminum fuel tanks, 4,000 gal. SS tank w/hyd. lift hoist, HydroVac water vac system, 222″ WB, 3:36 ratio, 11-22.5 tires, aluminum wheels, 460,000 miles
2009 IHC 4300 single axle, DT466, 250 hp., Allison automatic, air ride, 30′ van body, translucent roof, hyd. lift gate, warehouse racking, roll-up door, 275″ WB, 11R22.5 tires, outside aluminum rims, 292,650 miles, doesn’t require CDL
1998 IHC 8100, M11 Cummins, 280 hp., 9 spd., spring ride, 24′ van body, roll-up door, 256″ WB, 11-22.5 tires, steel rims, 515,732 miles
2011 Ford F450 crew cab dually, 6.7 liter Powerstroke diesel, automatic, 2WD, 9′ flatbed w/lumber rack and toolboxes, electric trailer brakes, 225/70R19.5 tires, 51,500 miles, single owner
1991 IHC 4900 single axle, DT466 diesel, 7 spd., 14′ Frontier contractor body, fold-down sides, spring ride, pintle hitch, rear air, 190″ WB, 11-22.5 tires on steel rims, shows 253,000 miles
PICKUPS
2008 GMC Sierra, 1/2 ton, reg. cab, 5.3 liter, automatic, 4WD, 8′ box, Rhino lining, 75,000 miles, single owner
2008 GMC Sierra, 1/2 ton, reg. cab, 5.3 liter, automatic, 8′ box, Rhino lining, 102,000 miles, single owner
2007 GMC 1 ton dually, crew cab, Duramax 6.6 liter, automatic, 2WD, flatbed w/lumber rack & toolboxes, 87,900 miles
2000 Chevrolet, 1/2 ton, 5.3 liter gas, automatic, 4WD, 154,880 miles
OTHER TRAILERS
1993 Fruehauf dry van, 53′, air ride, tandem slider, lights, converted into insulated job trailer w/warehouse racking, 250 gal. LP tank, Reznor 50,000 BTU heater, 11-22.5 tires on steel
Enclosed dry van, 40′, storage only
2008 ABU tandem axle bumper hitch tilt bed trailer, electric brakes, toolbox, single owner
2006 ABU tandem axle deckover pintle hitch trailer, 20′, dovetail ramp, electric brakes, toolbox, single owner
2001 ABU tandem axle deckover pintle hitch trailer, 20′, dovetail flip-up ramps, pop-up rear deck, electric brakes, toolbox, single owner
2011 Jensen tandem axle bumper hitch enclosed trailer, 18′, 4′ side door, fold-down ramp door, electric brakes, single owner
1998 Fechtner heavy duty tandem axle bumper hitch trailer, 16′, Knaack toolbox, single owner
1998 Jensen tandem axle bumper hitch enclosed trailer, 24′, electric brakes, rear swing doors, 4′ side door, racking inside, single owner
2006 United enclosed V-nose tandem axle trailer, 12′, with Maxforce 3330 basement waterproof spray system, 3/8″x150′ psi heavy duty hose, 31 hrs., single owner
CONCRETE GRINDING & POLISHING EQUIPMENT
(2) 2013 Barracuda XJ6 concrete grinders, 230v, 3 phase, single owner, S/N758, S/N757
(2) 2013 IPC Eagle pulsating vacs, 4-wheel carts, gauges, 15′ hoses, 220v, 1 phase, single owner, S/N25054, S/N25055
2013 XPS PB-1050 turbo vac, 16 gal. tank, 140 cfm, single owner, S/N10503760
2014 Genie edging grinder, DeWalt grinder, single owner
2013 Machine Mach I Genie grinder polisher, 220v, 1 phase, single owner, S/NXPSCG500-E001
2013 Pioneer Eclipse Cleanstar 20 scrubber, battery w/charger, single owner, S/N130100191
2013 Pioneer Eclipse burnisher, 28″, LP power, single owner, S/N76204
Inventory of polishing diamonds, resins & burnishing pads
(3) Spools 150′ wire, 3 phase w/couplers & cart
150′ cord, 220v, 1 phase
300′ ext. cord, 12-3 w/spool
Junction box, 220v, 3 phase, single owner
(2) Crusader high volume air fans, single owner
DeWalt grinder, 7″, single owner
Metobo handheld grinder, 7′ w/dust hood, single owner
TRACTOR
2014 JD 4720, open station, eHydro, 1 hyd., aux. rear hyd., 3 pt., 540 PTO, front weight pkg., 27-10.5-15 front turf tires, 44-18:00-20 rear turf tires, 65 hrs., single owner, S/N1LV4720HKDH916496
LASER EQUIPMENT
Trimble GL622 laser transmitter, tripod, grade stick
(2) Trimble GL522 laser transmitters, tripods, grade sticks
Trimble Leica Rugby 320SG laser transmitter, tripod, grade stick
OTHER EQUIPMENT
2010 Level Best LB-D8 grading box, 8′, Cat I or II, receivers, control box, complete, single owner, S/N1750
Hammond box blade, 7′, hyd. lift
2002 ProTech snow pusher, 16′
2013 Polaris Ranger Crew 800 EFI, manual dump box, receiver hitch, Pro Comp 26/9:00R14 tires on aluminum rims, 786 miles
CNH quick hitch, Category II, 3 pt.
JD “I” Match quick hitch, Category I, 3 pt.
Work platform, 12′, for forklift
Wacker PT2 pump, 2″, Honda 5.5 hp. motor, suction & discharge hose
Dewalt DG4300 gas power generator, wheels & handles, Honda 8 hp. motor
Honda EM3500S gas generator, Honda motor, wheels & handles
(2) 110 gal. fuel service tanks, Gasboy 12v pumps
Poly tanks, 130 gal. & 500 gal.
GEN SET, LIGHT PLANT, & GROUND HEATERS
2006 Caterpillar XQ80-2 gen set, 3054C engine, 100 kva/80 kw, 4,681 hrs., on Migs tandem axle trailer, S/N00C44CXYC00563
2005 Baldor Pow’R Lite light plant, Lombardini diesel motor, 6 kw, (4) 1000 watt lights, on trailer, 782 hrs., single owner
(2) Thawzall ground heater trailers, diesel, EM200 boiler, (5) 500′ zones, hose w/power reel
SCREEDS
Somero S-15M concrete laser screed, Kubota diesel, (4) spare smooth tires on rims, 65 hrs., single owner
Morrison screed, 42-1/2′ w/hyd. winch on each end, Honda GX160 motor
Morrison screed, 40′ w/hyd. winch on each end, Honda GX160 motor
MBW power screed head
Black Beauty screed power heads w/(4) aluminum screeds
(3) 2? screed pipes, 15?, 18?, 21?
COMPACTORS & PACKERS
MBW walk-behind plate compactor, Honda gas motor
MBW plate compactor, Honda GX160 motor
Multi-Quip MVC-88VHG plate compactor, Honda GX160 motor
Multi-Quip Mikasa plate compactor, Honda GX160 motor
Wacker BS600 jumping jack packer, 2 stroke
Wacker BS600 jumping jack packer, 4 stroke
MBW jumping jack packer, Honda 4 stroke motor
(4) Neuson Wacker BS60-2I jumping jack packers, 2-stroke motors
TROWELS
2010 Wacker Neuson CRT36-26A ride-on overlapping power trowel, double 36″, Honda GX690 engine, 95 hrs., S/N5951857
2007 Wacker CRT36-24A-E ride-on overlapping power trowel, double 36″, Honda 24 hp., 119 hrs., S/N5737310
2001 Wacker CRT48-25K-H ride-on overlapping power trowel, double 48″, Kohler 25 hp. motor, 1,775 hrs., S/N5264988
Bartell B436 walk-behind power trowel, 36″, Honda 5.5 hp.
Bartell B424 walk-behind power edging trowel, Honda GX120 motor
(2) Bartell walk-behind power trowels, 36″, Honda 5.5 hp. motor
MBW walk-behind power trowel, 46″, Honda 8 hp. motor
Multi-Quip J36H55 walk-behind power trowel, 36″, Honda GX160 motor
Multi-Quip walk-behind power trowel, Honda GX160 motor
Multi-Quip walk-behind power trowel, 46″, Honda GX270 motor
Terex walk-behind power trowel, Honda 5.5 hp. motor
OTHER CONCRETE EQUIPMENT
MK MK9000 Series concrete saw, New Honda GX390 motor
Diamond Products CC1300 core cut saw with Honda GX390 motor
(2) Husqvarna K760 cut off saw, gas
(2) Husqvarna K750 cut off saw, gas
Husqvarna 150 Prowler Soff Cut saw, Robin 4.5 hp. motor
Jet pneumatic jack hammer, 90 lb., (2) pts.
(2) Little Giant pull wagon, 3’x6′, pneumatic tires
(2) Little Giant pull wagon, 30″x4′, pneumatic tires
(2) Work Pro 150 power buggies, Honda 8 hp.
Benner Nawman Diamond DBD-25H portable rebar bender
Chicago Pneumatic pneumatic jack hammer, 90 lb., (2) pts.
(2) Allen concrete curing sprayers, Honda 5 hp. motors, 100′ hoses, on custom stands
Rebar cutter & bender
(2) Concrete sprayers, w/hoses & reels, used for form oil
(2) Pex tubing uncoilers
(4) Rehau tubing staplers w/New boxes of staples
(2) 48? poly roll applicators w/(7) rolls New poly
Gas & electric concrete vibrators
Misc. concrete tools including: floats; handles; brushes; knee pads; wire tie guns; misc. hand tools; trowels; edgers; Max cordless rebar tie guns; Hilti hammer drills; cordless drills; stake pullers; rebar benders & cutters; levels; tape measures; chalk lines; rebar chairs; handheld pneumatic hammers; etc.
FORMS & RELATED EQUIPMENT
Complete 2′ bin form kit, (23) 10’x2′ forms, (40) 30″ stakes, (82) 3′ stakes, cables, & come-alongs w/custom rack
(18) Bin forms, 10?x16? w/custom rack
(20) Ellis scaffold brackets for concrete wall forms
(8) Racks Ellis 4? hinged wall corners
(12) Racks Ellis 2?x4? wall forms
(3) Racks Misc. Ellis filler panels
(2) Racks Ellis 2?x5? wall panels
Rack Ellis misc. wall panels
(2) Racks aluminum misc. filler wall panels
(8) Racks of aluminum wall forms, 36?x8?
Aluminum wall forms including: 8?, 10?, 12? & 16?
(4) Sets 8? pre-formed corners
(4) Sets 8? hinged corners
(6) Ellis inside corners, 6?x4?
Ellis wall forms, 8?
Asst. Ellis wall forms
Misc. Ellis support pieces
Box forms to include: 16?x2?, 16?x18?, & other misc. 18?
Asst. metal forms, 10?x6?, 10?x12?
Flat metal form stakes, 2?
(250) Turnbuckles for concrete forms
Misc. round metal stakes for forms
Asst. pins & wedges for aluminum wall forms
(40) Wall support turnbuckles
(57) Insulated concrete blankets, 12?x25?
Large amount wood stakes: 1?x3?x3?; 1?x3?x2?; 2?x4?x2?, New and used
Asst. rebar, 20? & 40?, #8, #6, & #4
Large asst. 16? lumber for forms including: 2×4; 2×6; 2×8; 2×10, new and used
Asst. CDX & laminated plywood sheets & other misc. plywood
SHOP EQUIPMENT
2005 Atlas Copco XAS97 air compressor, 185 cfm, JD diesel, dual line hookup, 346 actual hrs., S/N23115
Brute sandblaster
Craftsman air compressor, 25 gal., 5 hp., 110v
DeWalt Emglo air compressor, 15 gal., 1.8 hp., 110v, on wheels
Quincy air compressor, Honda GX390 electric start motor, hose reel, on skid with fork pockets
Allied Mfg. pressure washer, fuel oil fired, electric pump, hose reel less hose
(2) DeWalt DWS780 miter saws, 12″, w/Model DWX7232 stand
DeWalt DW744 table saw, on stand
Industrial Air electric air compressor, 110v, single owner
Jet pallet jack
Jet shop hoist
(3) Jet chain hoists
Safety Speed Mfg. vertical panel saw, Milwaukee power saw
(3) Master BLP375AT LP heaters, one does not work
Sureflame 51505 heater, 1,000,000 BTU, natural gas or LP, 110v fan, on wheels
Clemco 2020 abrasive blast equipment, 4 cyl. cap., on cart
Clemco Cap 1 ambient air pump, 3/4 hp., 1 phase, w/hose & hood
(2) Crane straps, 40?x8? w/clevices
Asst. heavy duty air compressor hoses
Asst. tools including: shovels, rakes, scrapers, sledge hammers, saw horses, etc.
(2) cord reels, 300? & 400? of 110v, 12/3 cord
Asst. chains, binders, straps
INVENTORY & MISC. ITEMS
250 gal. tote of form release oil HQ
Tuff-N-Dri 330 gal. tote waterproofing compound
Densifier, 45 gal., for concrete polishing
Misc. drain tile
Asst. float pads, for ride-on power trowels
Floor drain grates, 47?x17.5?
Asst. 1-1/2? square x14.5? tubing pieces for floor grating
(26) Boxes of Max tie wire for rebar tie guns
(7) Steel pipe door protectors, 6?
Misc. lengths Pex floor heating tubing
Cut-off blades for metal or concrete
Reinforced poly rolls, (4) 40?x100? & misc. sizes
Barn fan, 38″, 110v, on wheels
Barn fan, 42″, 110v, on wheels
Asst. (38) business band radios, programmable, (1) handheld, (2) base stations
Asst. truck parts, steps, tanks, etc.
Misc. truck tires, 22.5 & Super Singles
(4) Michelin 23.5R25 tires
PRIME CONCRETE INC.
Doug and Cate Bladow, 701.640.0437
or Brad Olstad & Tadd Skaurud of Steffes Group, 701.238.0240, 701.729.3644
TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items.? Statements made auction day take precedence over all advertising.? $35 documentation fee applies to all titled vehicles. Titles will be mailed.? Canadian buyers need a bank letter of credit to facilitate border transfer.
??????????