Preview is by appointment. Removal is two weeks from auction date, by appointment. For loadout contact Darrell Popham. For information contact the Popham Brothers Duane 605.880.1006 or Darrell 605.520.2879, or from Steffes Group, Kyle Waller 605.799.6261 or Ben Hochgraber 701.425.3391.

TIMED ONLINE AUCTION

 

Location: 44586 166th St., Florence, SD 57235

 

OPENS: THURSDAY, OCTOBER 22

CLOSES: THURSDAY, OCTOBER 29

 

PREVIEW:  By Appointment

LOADOUT: By Appointment

 

MFWD TRACTORS & LOADERS

2005 Case-IH MXM 130, MFWD, CAH, 18 spd. partial powershift, LH reverser, 2 hyd., 3 pt., 540/1000 PTO, diff lock, foot throttle, joystick control, 3 pt. fender controls, block heater, Great Bend 760 loader, manual quick connect, 96″ bucket w/4-bar grapple, 14.9-30 front tires, 18.4-42 rear tires, shows 157 hrs., loader S/N00106, S/NACM2049

Belarus 1025, MFWD, CAH, turbo diesel, 18 spd., 2 hyd., 3 pt., 540 PTO, diff lock, joystick loader control, 3rd spool for grapple, Woods DuAl 215 loader, 84″ bucket w/4-bar grapple, 48″ forks, 3-prong bale spear, manual quick connect, front aux. hyd., inside rear weights, 13.6-20 front tires, 16.9-38 rear tires, updated HD Belarus front axle, shows 2,808 hrs., loader S/N747104, S/N422962

Belarus 825, MFWD, CAH, 4 cyl. diesel, 18 spd., diff lock, 2 hyd., 3 pt., 540 PTO, joystick loader control, 3rd spool for grapple, inside rear weights, 11.2-20 front tires, 15.5-38 rear tires, has loader mounts, but no loader, updated HD Belarus front axle, shows 3,250 hrs., S/N344914

 

2WD & COLLECTIBLE TRACTORS

1983 Case 2290, CAH, partial powershift, 3 hyd., 3 pt., top link, 540/1000 PTO, diff lock, rock box w/bottom dump, block heater, 11:00-16 front tires, 18.4-42 rear duals on 10-bolt hubs, 7,436 hrs., S/N9926211

1965 Minneapolis Moline Super U302, open station, Schwartz wide front, 4 cyl. gas, 5 spd. w/2 spd. Hi/Low, 1 hyd., 3 pt., 540 PTO, aftermarket block heater, fenders, 11L-15L front tires, 15.5-38 rear tires, shows 4,935 hrs., S/N27601759

1946 Farmall A, 4 cyl. gas, belt pulley, 540 PTO, 5.00-15 front tires, rear wheel weights, 9.5-24 rear tires, engine loose, does not run, S/N161551

 

HARVEST EQUIPMENT

1979 John Deere 7721 pull-type combine, chopper, 23.1-26 tires, 1000 PTO, for parts only, S/N363069H

1998 John Deere 922 flex head, 22′, finger reel, manual fore/aft, poly skids, single drive, poly dividers, Crary air reel, multi-point hookup, stubble lights, w/shop-built header transport, S/NH00922F675932

John Deere 643 corn head, 6×30″, steel snouts

1977 John Deere hyd. pickup head, 5-belt, S/N273580H

 

DRILL

Melroe 204 drill, (2) 8’s, 6″ spacing, double disc openers, 2″ steel packers, grass seed boxes, shop-built hitch, missing 1 hyd. lift cylinder, S/N2101-4197 & S/N2101-4809

 

TILLAGE & ROW CROP EQUIPMENT

Oliver tandem disc, 26′, 18″ front blades, 19″ rear blades, 9″ spacing, hyd. lift, 11L-15SL tires, manual hitch leveling

Ford 241 tandem disc, 20′, manual adj. angle front & rear, 17″ front blades, 19″ rear blades, 9″ spacing, manual hitch leveling, hyd. lift, manual fold wings, 9.5L-15 tandems, S/NWN12316

Sunflower 121115 tandem disc, 15′, 20″ front blades, 21″ rear blades, 9″ spacing, hyd. lift, manual hitch leveling, 9.5-15SL tandems, S/N1290303

John Deere tandem disc, 14′, front 16″ blades, 9″ spacing, rear 17″ blades, rear hitch, hyd. lift, hitch leveling has been fixed since pictured

IHC 45 vibrashank cultivator, 16′, 6″ spacing, hyd. lift, 5-bar spike tooth harrow, less cylinder, 8″ sweeps, 14″ tires, S/N45C1417

IHC 45 vibrashank cultivator, 16′, 6″ spacing, hyd. lift, 8″ sweeps, 14″ tires, S/N45C1411

IHC chisel plow, 14′, 2″ pts., hyd. lift-less cylinder, 8″ spacing, 2-bar harrow, 14″ tires, S/NBC1111

IHC 55 chisel plow, 13′, 12″ spacing, 2″ pts., hyd. lift, 7.00-14 tires

Lilliston/Lehman rolling cultivator, 4×30″, 3 pt., 18″ coulters, S/N64-9057

Cultivator, 4×30″, 3 pt., gauge wheels

John Deere plow, 4-bottom, semi-mount, 5.5-15 tires

 

SEMI TRACTOR & TRUCKS

2003 IHC 9200, ISX 400 Cummins, Eaton Fuller 10 spd., engine brake, air susp., air slide 5th, cruise, power divider, 12,000 lb. front, 40,000 lb. rear, 171″ WB, 11R22.5 tires, alum front/steel rears, 25,177 hrs., 715,306 miles

1974 Chevrolet C65 tag tandem, V8 gas, 5&2 spd., PTO, spring susp., 20’x96″x60″ box, 9,000 lb. front, 16,160 lb. rear, 10:00-20 front tires, 9:00 20 rear tires, shows 818 miles

1985 Chevrolet C70 single axle, V8 gas, 5&2 spd., PTO, spring ride, 16’x96″x50″ box, 2-post hoist, 3 pc. end gate, 9,000 lb. front, 18,960 lb. rear, 9:00-20 tires, 185,928 miles, sells w/silage box

1970 Chevrolet C50 single axle, V8 gas, 4&2 spd., Muncie PTO, spring ride, Plains 16’x94″x42″ box, wood floor & sides, 2-post hoist, 3 pc. end gate, rear hitch, 190″ WB, 9:00-20 tires, 91,068 miles, sells w/silage box

 

PICKUPS

1995 Chevrolet 3500 Silverado, reg. cab, 7.4L V8 gas, automatic, 4WD, gooseneck ball hitch, 265/75R16 tires, 173,504 miles

1994 Chevrolet 1500 Silverado, ext. cab, 5.7L gas, automatic, 4WD, tonneau cover, 265/75R16 tires, 205,197 miles

1991 Chevrolet 1500 Silverado, ext. cab, 5.7L gas, automatic, 4WD, toolbox, 265/75R16 tires, 186,248 miles

 

HOPPER BOTTOM & OTHER TRAILERS

2012 Merritt tandem axle hopper bottom, 42’x96″x68″, air ride susp., roll tarp, air dump, LH sight glass, plumbed for pup, ABS, 11R24.5 tires on aluminum wheels

1995 Featherlite 8110 tandem axle all aluminum gooseneck stock trailer, 24’x7′, torsion axles, mid-gate w/slide, end gate w/slide, curbside door, 235/85R16 tires, steel rims

1978 Trailers Inc. tandem axle 5th wheel trailer, 17’x6′, wood floor, mid-gate, spring susp., 7.00-15 tires

1976 Trailers Inc. gooseneck tandem axle flatbed trailer, 25’x96″, steel bed, spring susp., 12-16.5 LT tires, all New lights & wiring

 

SPRAYER, SPRAYER FRAME & CHEMICAL EQUIPMENT

Ag Chem 1000 pull-type sprayer, 60′ boom, 1,000 gal. poly tank, hyd. pump, 3-section boom control, 20″ spacing, single nozzle, rinse tank, breakaway ends, hyd. boom lift & fold, Raven SCS440 control, 13.6-38 tires, S/NP98077

Kuker pull-type sprayer frame, 40′, adj. axle spacing, 20″ spacing, single nozzle, 540 PTO pump, T-valve controller, 15″ tires, No Tank

Gandy M904 electric inoculant box, 4-spout, S/N42548

330 gal. tote, 15 gal. mix cone, 2″ hose, asst. of sprayer parts

 

HAY EQUIPMENT

1993 Vermeer 605K baler, kickers, twine tie, manual lift pickup, rubber gathering wheels, 540 CV PTO, 31×13.50-15 tires, comes w/New extra roller, S/N1VPB141P7P1000803

1980 Hesston 6450 self-propelled swather, 6 cyl. gas, hydrostatic, 18′ head, finger reel, run flat gauge wheels, manual fore/aft, double knife drive, 13.50-16.1 front tires, 5.90-15 rear tires, shows 1,147 hrs., S/N645T2109

New Holland 116 hyd. swing mower conditioner, 16′ head, rubber rollers, double knife drive, 540 PTO, S/N575578

IHC 1100 pull-type sickle mower, 9′, 540 PTO, hyd. lift

Asst. rakes including New Holland Rolabar

Husky T8 hay rack, 20’x8′, on 8-ton running gear, 6-bolt hubs, broken stringer

Hay rack, 14’x8′ on 4-wheel running gear, 6-bolt hubs

MDS Mfg. QC double prong bale spear for loader, S/NT3013

(2) Bale movers, 3 pt., 55″

Bale unroller, 3 pt. less hyd. cylinder

 

FORAGE PROCESSING & FEEDING EQUIPMENT

John Deere 3970 pull-type forage harvester, 1000 PTO, 3×30″ corn head, 12″ & 5″ axle extension, hyd. rotate, hyd. chute, Gandy Box 09M902 electric drive w/(2) spouts, manual swing tongue, sharpener, 3×30″ corn head, (2) John Deere E038P pickup heads, 5-1/2′, corn head S/NE000RCX962367, pickup heads S/N404567E, S/N035327E, S/NE03970X961574

Fair Mfg. 7825 bale processor, RH discharge, rear bale lift, hyd. adj. slug bars, hyd. oscillating table, RH cleanout door, 1000 CV PTO, 16.5L-16.1SL tires, S/NBP78255614

Knight 3300 Reel Auggie mixer, single axle, LH 3-auger discharge, Digi-Star EZ320 scale, 540 PTO, 9.00-20 tires

New Holland 352 grinder/mixer, (4) 16″ screens, cable lift augers, manual swing, 540 PTO, 9.5L-14 tires, S/N280397

2012 Lucknow 2420 vertical feed wagon, Digi-Star EZ 2400v scale, LH discharge, single vertical beater, hyd. chain drive discharge, 540 PTO, 19.0/45-17 tires, (2) bale adj. for grinding, S/N12-0091

 

FORAGE & GRAVITY WAGONS

John Deere 125 forage wagon, John Deere W1075 running gear, triple beater, LH delivery, 20″ chain, front & rear unload, 540 PTO, adj. tongue, S/N006872W

Lorenz Mfg. forage wagon, Lindsey 4-wheel running gear w/6-bolt hubs, adj. hitch, twin beater, LH delivery, 20″ chain discharge, 540 PTO, S/N500126

Richardton 1200 hyd. side dump wagon, 4-wheel running gear, manual adj. hitch, 11.00-20 tires, S/N2098

Parker 2000 gravity wagon, LH discharge, adj. tongue, front ladder, rear hitch, 4-wheel running gear, 11L-15SL, 6-bolt hubs

Anthony box wagon, 10’x6′, 3-way end gate, Wards 4-wheel running gear, 6-bolt hubs, S/NM-141610

Anthony RG3 box wagon, 10’x6′, 4-wheel running gear, 3-way end gate, 6-bolt hubs, S/N15814

Anthony RG2 end dump flare box, 10’x5′, 4-wheel running gear, removable end gate w/grain door, 6-bolt hubs, shop-built front cable lift, S/N2220

 

LIVESTOCK EQUIPMENT

New Holland 516 single axle manure spreader, 205 bu., single beater, wood floor, 540 PTO, 9.00-20 tires, S/N139961

(15) Macksteel 20’x3′ steel feed bunks

(20) South Shore Mfg. 10′ 1-3/4″ round tube cattle panels

Vern’s Mfg. (2) bow gates, (14) panels, 12′ long, 1-3/4″” round tube, will make a 60′ round pen

Cattle panels: (2) 16′ 2′ square tube; (3) 12′ 1-3/4″ square tube; (2) 14′ 1-3/4′ square tube

Asst. mineral feeders

Asst. of 1/2″ threaded end cable

Fencers including: (4) Parmak solar electric fence paks, (3) 6v, (1) 12v; (3) asst. battery fencers

Asst. cattle oilers

Hyd. squeeze chute w/power unit, LH/RH squeeze & LH head controls, US Electric 10 hp. motor, 1 phase

Calf tipping table w/handgate

Tire feeders

(2) Sets of (3) 8′ round bale feeders, 1″ square tubing

Round bale feeders, (2) 9′, 3 pc.; (1) 8′

 

GRAIN HANDLING & AERATION EQUIPMENT

Westfield MK 100-71 auger, hyd. lift, swing hopper, 540 PTO, hopper damage, S/N103225

Westfield auger, 60’x10″, hyd. swing hopper, hyd. lift, 540 PTO, S/N11183

Mayrath auger, 50’x8″, cable lift, 540 PTO CNV S/N

Rapat conveyor, 14’x12″, manual lift, 3/4 hp., 1 phase

Sudenga hyd. transfer auger, 7″

Verdon conveyor, 13’x12″, manual lift, 3/4 hp., 1 phase

Westfield hyd. end gate drill fill, 6″ poly spout, electric shut-off switch, S/N16118W

Asst. 3″ pencil augers w/electric 3/4 hp. motors, 1 phase; 4″ pencil auger

Sukup aeration fan, 24″, 5-7 hp., 230v, 1 phase, unused, S/N104631

 

OTHER EQUIPMENT

Land Level 12-PT pull-type box scraper, 12′, hyd. lift, 235/75R15 tires

Westendorf loader, w/rock bucket, 3-bar grapple less hyd. cylinder, mounts & hyd. pump off IHC 666, w/50″ bucket

Lorenz Mfg. Wack-a-Track track wacker, 3 pt., (4) S-tines, S/N1939

Antique belly dump, steel wheels, ground driven

Posthole auger, 12″ auger, 3 pt., 540 PTO

Schaver post pounder, 3 pt.

 

ATVS

1982 Honda ATC 200E 3-wheeler

2005 Honda Rancher TRX350FM 4-wheel ATV

 

FARM SUPPORT ITEMS & MISCELLANEOUS

1,600 gal. & 500 gal. poly tanks w/2″ valves

Goodyear 18.4-34 tires

(8) John Deere front end weights

3 pt. quick hitch, Cat II/III

Asst. electric motors: 3 hp., 1 phase, 230v, 20 amp; Leeson 1/2 hp., 1 phase, 115v; 1/2 hp., 1 phase, 115v

Briggs & Stratton 900 & 950 Intek motors, 205cc & 208cc w/2″ water pumps

Duplex Mfg. Model 55 antique belt driven well pump

(4) Pallets of steel fence posts, approx. 308 count

Asst. pickup parts: (2) cattle guards, rear bumper, hitch

Quantity of rubber tire sidewalls for silage pile weight

70 gal. slip tank w/hand pump

(2) sliding quonset doors, 14′ wide x 12′ high

Asst. poly tubing

 

POPHAM BROTHERS

DUANE & DARRELL
Duane, 605.880.1006, Darrell, 605.520.2879
or Kyle Waller at Steffes Group, 605.799.6261 
or Ben Hochgraber at Steffes Group, 701.425.3391 

---

Photo Gallery