Ring 2 will include Skid Steers, Recreational, Automobiles, Pickups, Semi Trucks, Box Trucks, Hopper Bottoms, Live Bottom, End Dump Trailers, Cattle Trailer, Low Boy, Flat Beds, Combine Trailers, Tankers, Gooseneck, Bumper Hitch Trailers.

AGIRON WEST FARGO EVENT

 

LOCATION:  Red River Valley Fairgrounds, on the west edge of West Fargo, ND.

AUCTIONEER’S NOTE: Auctioneers will run FIVE rings with live online bidding on major equipment on rings 1, 2, 3, & 4. Ring 5 will be smalls.There will be no loading assistance until 2:00 PM. Cars and pickups may enter grounds at 12:00 Noon for self-loading. Equipment removal by July 28, unless other arrangements are made. Hauling and loading are available. Contact auctioneers for owner information, new consignments, or changes at 701.237.9173 or 800.726.8609. Live online bidding available on major equipment. 

Items highlighted in yellow are additions or changes from the original posting.

 

TRACK TRACTORS

2013 John Deere 9560RT, deluxe CommandView cab, buddy seat, leather, powershift, 5 hyd., integrated auto steer, (26) front suitcase weights, idler weights, premium HID light pkg., electric mirrors, Cat 5 wide swing drawbar, 36” Durabilt 5500 tracks, 1,120 hrs., S/N1RW9560RCDP902348

2000 John Deere 9400T, 24 speed, 4 hyd., integrated auto steer, (26) front suitcase weights, 36″ tracks, 8,790 hrs., S/NRW9400T900303

1993 Caterpillar 65C, 10 spd. powershift, 4 hyd., 3 pt., quick hitch, approx. 8,000 hrs., S/N2ZJ00339

 

4WD TRACTORS

2012 John Deere 9560R, deluxe cab, leather, powershift, 4 hyd., integrated auto steer, 7″ color touch screen display, radar, diff lock, electric mirrors, HID lights, weight package, greasable steering pins, Michelin 800/70R38 duals, 1,980 hrs., S/N1RW9560RTCP001268

2009 John Deere 9330, deluxe cab, active seat, powershift, 4 hyd., 48 gpm pump, integrated auto steer, power mirrors, HID lights, 710/70R42 tires w/duals, 3,730 hrs., S/NRW9330P012040

2008 Case-IH 335, powershift, standard cab, 5 hyd., high cap. pump, rear wheel weights, front weight brackets, Firestone 18.4R46 radial deep thread 23 degree R1W tires, factory triples, (2) drawbar pins, 1,395 hrs., S/NZ7F108410

1989 Case 9180, CAH, air ride seat, 14.0L Cummins, 375 hp., 12 spd. powershift, 4 hyd., 24.5R32 duals, shows 9,729 hrs., single owner, S/NJCB0003361

Case-IH 9170, CAH, powershift, 4 hyd., 20.8-42 duals, 11,020 hrs., powershift rebuilt at 9,800 hrs.

John Deere 8870, 12 spd., 4 hyd., 20.8R42 duals, 75%, 8,130 hrs., S/N001368

1995 John Deere 8770, CAH, 12 spd., 4 hyd., diff lock, 20.8-38 duals, 50%, 8153 hrs., S/NRW8770S002977

1978 Steiger Panther III ST-310, CAH, 855 Cummins diesel, 24 spd., 310 hp., 4 hyd., 24.5-32 duals, shows 8,816 hrs., S/N107-00563

1985 Versatile 876, Cummins 844, powershift, 4 hyd., large 1000 PTO, A/C, AM/FM, LED lights, factory band duals, shows 1,541 hrs., S/N225052

1975 Versatile 800, 12 spd., A/C, 3 hyd., 18.4-38 duals, 9,899 hrs., 1,000 hrs. on major rebuild, S/N8003030644

1975 Versatile 800, S/N12 spd., seat susp., A/C, 3 hyd., 18.4R38 duals, 7,988 hrs., 2,000 hrs. on rebuild, S/N8003030423

 

MFWD TRACTORS

2014 John Deere 8245R, MFWD, premium CommandView cab, buddy seat, IVT, ILS, 7” color touch display, 5 hyd., 85 gpm pump, power beyond, return flow, 3 pt., quick hitch, 1000 PTO, Cat 4 drawbar, integrated auto steer, diff lock, radar, HID lights, (22) front suitcase weights, (2) rear 1,400 lb. weights, cold weather pkg., premium radio XM satellite, fenders, 320/80R42 front duals, 380/90R54 press steel duals, 1,025 hrs., S/N1RW8245RKED097542

2011 John Deere 8285R, MFWD, IVT, ILS, deluxe cab, active seat, buddy seat, 4 hyd., power beyond, return flow, 3 pt., quick hitch, 1000 PTO, auto steer ready, 7″ color touch, display, HID lights, diff lock, wide coverage rear fenders, front fenders, w/John Deere H480 loader, joystick, bucket, 380/80R38 front tires, 480/90R50 rear factory hub duals, 1,345 hrs., S/N1RW8285RJBD042898

2014 Massey Ferguson 6616, MFWD, Standard cab, buddy seat, 160 hp., Dyna-6 powershift, 3 hyd., 3 pt., 540/1000 PTO, cab susp., front weight bracket, fenders, 420/90R30 front tires, 480/80R42 rear tires, Massey Ferguson 951 quick tach loader, bucket w/4-tine grapple, 3-function joystick, 898 hrs., S/ND267040

2010 Case-IH Magnum 180, MFWD, deluxe cab, buddy seat, 16 spd. powershift, LH reverser, 3 hyd., return flow, 3 pt., quick hitch, 540/1000 PTO, diff lock, HID lights, (10) front weights, front fenders, 380/85R34 front tires, 380/90R50 rear press steel duals, shows 1,230 hrs., S/NZR9H04835

2008 John Deere 8430, MFWD, IVT, ILS, leather seat, 4 hyd., 3 pt., quick hitch, large 1000 PTO, auto steer ready, side mirrors, rotating beacon, HID lights, rear wheel weights, front & rear duals, 6,518 hrs., S/NRW8430D022962

2007 AGCO DT220A, MFWD, CVT, deluxe air ride cab, (2) entry doors, 4 hyd., 3 pt., quick hitch, 540/1000 PTO, Trimble auto steer, CFX 750 Nav II, (15) front suitcase weights, 380/85R30 front tires, rear fenders, 380/90R46 duals, 90%, set up for 22″ rows, 2,400 hrs., New batteries, S/NS280476

2003 John Deere 7520, MFWD, IVT, deluxe cab, 3 hyd., 3 pt., 540/1000 PTO, right hand steps, block heater, 2011 John Deere 741 loader, bucket, 3-function joystick, front fenders, 380/80R28 front tires, rear wheel weights, 480/80R38 rear tires, 5,715 hrs., loader S/N1P00741XCBD041647, tractor S/NRW7520D001495

1995 John Deere 8300, MFWD, powershift, 4 hyd., 3 pt., 32 gpm pump, quick hitch, 1000 PTO, diff lock, front weights, front fenders, 380/85R38 front tires, 380/90R50 press steel hub duals, 9,610 hrs., S/NRW8300P002939

New Holland TN75A, MFWD, diesel, open station, syncro with LH shuttle, 2 hyd., 3 pt., 540 PTO, 3,650 hrs.

1984 IHC 5488, MFWD, CAH, partial powershift, 3 hyd., 3 pt., 1000 PTO, Woods Dual 315 quick tach hyd. loader, bucket w/grapple, joystick, 20.8-42 single rear tires, 10,300 hrs., approx. 4,000 hrs. on engine OH, New clutch in 2016, S/N3303

 

2WD TRACTORS

Case-IH 3394, CAH, partial powershift, 3 hyd., 3 pt., 540/1000 PTO, suitcase weights, duals

Case-IH 2290, CAH, partial powershift, 2 hyd., 3 pt., 540/1000 PTO, Koyker loader, duals

John Deere 4430, CAH, quad range, 3 hyd., 540/1000 PTO, front fuel tank, 11:00-16 front tires, 18.4-38 tires w/10-bolt duals, approx. 11,000 hrs., single owner, S/N4430H068704R

1975 John Deere 2630, diesel, open ROPS w/canopy, 1 hyd., 3 pt., 540 PTO, (6) front weights, rear wheel weights, 15.5-38 tires, 4,334 hrs., S/N317841T, rebuilt fuel pump, New starter & battery

1970 John Deere 2520, side console, gas, ROPS, 1 hyd., 3 pt., quick hitch, 540/1000 PTO, 3,640 actual hrs., updated starter, S/NT711R022123R

John Deere 2030, gas, 8F/4R, 2 hyd., 3 pt., 540/1000 PTO, Schwartz loader, drawbar, S/N25006T

1978 Allis Chalmers 7020, CAH, 3 hyd., 3 pt., 540/1000 PTO, 18.4-38 tires, S/N2655

1967 Ford 5000, gas, 8 spd., 1 hyd., 3 pt., 540 PTO, Ford 727 loader w/5-1/2’ bucket, S/NC166197

Case 1030, Comfort King, diesel, 2 hyd., 3 pt., PTO, 18.4-34 tires, 3,437 hrs.

IHC 756, gas, 2 hyd., Dual 345 loader w/grapple

1984 IHC 244, 3 cyl. diesel, 1 hyd., 3 pt., PTO, mid-mount hyd. blade, turf tires, 1,775 hrs.

Ford 3000 utility, 1 hyd., 3 pt., 540 PTO, 4,456 hrs.

 

COLLECTIBLE TRACTORS

1963 John Deere 1010 Special, open station, 5 spd., 1 hyd., 3 pt., PTO, 12v, complete restoration, 10 hrs. on complete engine OH, New tires & battery, all records for new buyer including picture book

Allis Chalmers WD45, gas, wide front, single tires

Allis Chalmers HD9L track loader, open ROPS, 471 Detroit diesel, 3 yd. bucket, New hyd. pump

Cockshutt 30, wide front, restored, runs

Co-op E3, wide front, restored, runs

Farmall Super M with Dual 320 hyd. loader, 7′ snow bucket, 13.6-38 tires, S/NSMF6754J

1949 Farmall M, gas, wide front, hyd., 13.6-38 rear tires, not running, S/NBK201032X1

IHC Hydro 84, wide front, open cab, 2 hyd., 540 PTO, 9.5L-15 front tires, 15.5-38 rear tires, shows 495 hrs., S/NB600210B008071

International McCormick Farmall Super A, wide front, gas, 4 spd., 6v electric start, 540 PTO, Woods L59 mower, 9:00-24 rear turf tires, with new set of blades

McCormick Deering F12, narrow front, runs

Minneapolis Moline Z, narrow front, gas, 6 volt, S/N00650008777

IHC M, gas, 540 PTO

 

TRACTOR LOADERS & ATTACHMENTS

2009 John Deere 740 Classic, quick tach loader, 8′ dirt bucket, grill guard, w/mounts & hardware, fits 2WD & MFWD, no joystick

John Deere 726 hyd. loader, bucket, joystick, 50 Series mounts

John Deere 146 hyd. loader, 84″ bucket, Bobcat quick plate

Pallet forks, quick attach, for John Deere 725 loader

 

GPS EQUIPMENT

AFS Pro 700 monitor, S/N12151492

Ag Leader display w/Section Control

Beeline auto steer system

Case 87518983 controller, S/N5212549366

Raven Cruiser II with patch antenna kit, GPS antenna SM-76, S/N7610186, S/N0000002550

Reichhardt integrated auto steer, off Case-IH 9230

Trimble AG-372 globe, S/N57513-323N84574272

Trimble AgGPS 900 RTK radio w/252 receiver, S/N0225113100

 

COMBINES

2013 John Deere S690, Contour-Master, premium cab, PRWD, ProDrive with Harvest Smart, Command Touch 5 spd. feeder house, integrated auto steer, 2630 display in arm reset, custom cutter ext. wear pkg., 26’ high cap. unloading auger, fine cut chopper, HID lights, 650/85R38 straddle duals, 28L-26 rear tires, 1,336 sep. hrs., 2,001 engine hrs., S/N1H05690SKD0755441

2012 John Deere S680, Contour-Master, premium cab, ProDrive, 2 spd. PRWD, 5 spd. feeder house, integrated auto steer, 2630 display armrest, TouchSet, Y&M, diff lock, power fold hopper, 26-1/2′ high cap. unloading auger, fine cut chopper, HID lights, power mirrors, large & small wire concaves, 1,638 sep. hrs., 2,412 engine hrs.650/85R38 straddle duals, 28L-26 rear tires, S/N1H0S680SCC0747344

2014 John Deere S670, 2WD, Contour-Master, deluxe cab, deluxe controls, heavy duty variable spd. feeder house, integrated auto steer, John Deere hopper ext., 26′ high cap. unloading auger, fine cut chopper, electric mirrors, 520/85R42 duals, 28L-26 rear tires, 777 sep. hrs., 1,095 engine hrs., S/N1H0S670SPE0765262

2014 John Deere S670, 2WD, Contour-Master, deluxe cab, deluxe controls, heavy duty variable spd. feeder house, integrated auto steer, John Deere hopper ext., 26′ high cap. unloading auger, fine cut chopper, electric mirrors, 520/85R42 duals, 28L-26 rear tires, 1,132 sep. hrs., 1,655 engine hrs., S/N1H0S670SJE0765748

2014 John Deere S670, 2WD, Contour-Master, deluxe cab, deluxe controls, heavy duty variable spd. feeder house, integrated auto steer, John Deere hopper ext., 26′ high cap. unloading auger, fine cut chopper, electric mirrors, 520/85R42 duals, 28L-26 rear tires, 1,085 sep. hrs., 1,700 engine hrs., S/N1H0S670SJE0765782

2013 John Deere S670, 2WD, Contour-Master, deluxe cab, deluxe controls, heavy duty variable spd. feeder house, integrated auto steer, John Deere hopper ext., 26′ high cap. unloading auger, fine cut chopper, electric mirrors, 520/85R42 duals, 28L-26 rear tires, 1,077 sep. hrs., 1,256 engine hrs., S/N1H0S670SCD0755777

2013 John Deere S670, Contour-Master, deluxe controls, integrated auto steer, Y&M, TouchSet, high cap. unloading auger, fine cut chopper, HID lights, 520/85R42 straddle duals, 28L-26 rear tires, 1,662 sep. hrs., 2,476 engine hrs., S/N756366

2013 John Deere S670, Contour-Master, deluxe controls, integrated auto steer, Y&M, TouchSet, high cap. unloading auger, fine cut chopper, 1,620 sep. hrs., 2,170 engine hrs.

2010 John Deere 9870, STS, Contour-Master, deluxe cab, deluxe controls, integrated auto steer, 5 spd. feeder house, Y&M, 22-1/2′ unloading auger, HID lights, fine cut chopper, 650/85R38 duals, 28L-26 rears, 1,397 sep. hrs., 1,750 engine hrs., S/N1H09870SKA0736185

2009 John Deere 9870, STS, Contour-Master, premium cab, deluxe controls, 5 spd. feeder house, Y&M, ProDrive, integrated auto steer, 22-1/2′ high cap. unloading auger, Crary Big Top hopper ext., high cap. lift cylinders, HID lights, fine cut chopper, 20.8R38 duals, 480/70R30 rears, 1,397 sep. hrs., 1,720 engine hrs., S/N1H09870S731394

2008 John Deere 9870, STS, Contour-Master, PRWD, premium cab, deluxe controls, 5 spd. feeder house, Y&M, TouchSet, 22-1/2′ high cap. unloading auger, hopper ext., fine cut chopper, round bar concaves, 520/85R42 duals, 28L-26 rear tires, 1,600 sep. hrs., 3,150 engine hrs., S/NH09870S725233

2004 John Deere 9860, STS, Contour-Master, deluxe cab, fixed feeder house, reverser, Y&M, auto steer ready, wired for RowCommand, John Deere hopper ext., TSR choppers, (4) lift cyl., unloading auger ext., LED lights, 20.8-42 duals, 28L-26 rear tires, S/NH09860S706068

2010 John Deere 9770, STS, Contour-Master, premier cab, deluxe controls, HD variable spd. feeder house, high cap. lift cyl., Y&M, TouchSet, integrated auto steer, 22-1/2′ high cap. unloading auger, John Deere hopper ext., fine cut chopper, round bar concaves, 710/70R38 duals, 28L-26 rear tires, 1,767 sep. hrs., 2,628 engine hrs., S/NH09770S730797

2010 John Deere 9770, STS, Contour-Master, ProDrive, premier cab, deluxe controls, HD variable spd. feeder house, high cap. lift cyl., Y&M, TouchSet, auto steer ready, 22-1/2′ high cap. unloading auger, John Deere hopper ext., fine cut chopper, round bar concaves, heavy duty final drives, 420/80R46 triples,  28L-26 rear tires, 1,860 sep. hrs., 2,492 engine hrs., S/N1H09770SCA0736502

2009 John Deere 9770, STS, Contour-Master, deluxe controls, integrated auto steer, TouchSet, Y&M, variable spd. feeder house, 22-1/2′ high cap. unloading auger, HID lights, fine cut chopper, 520/85R38 straddle duals, 28L-26 rear tires, 1,402 sep. hrs., 2,025 engine hrs., S/NH09770S732008

2008 John Deere 9770, STS, Contour-Master, premier cab, deluxe controls, HD variable spd. feeder house, high cap. lift cyl., Y&M, TouchSet, auto steer ready, 22-1/2′ high cap. unloading auger, John Deere hopper ext., fine cut chopper, small wire and round bar concaves, 20.8-42 duals, 480/70R30 rear tires, 1,676 sep. hrs., 2,280 engine hrs., S/NH09770S727704

2007 John Deere 9760, STS, Contour-Master, bullet rotor, RWD, variable spd. feeder house, reverser, Y&M, auto steer ready, hopper ext., small & large wire concaves, 800/70R38 front tires, 600/65R28 rear tires, 2,322 sep. hrs., 3,065 engine hrs., S/NH09760S720677

2006 John Deere 9760, STS, bullet rotor, Contour-Master, deluxe controls, high cap. unloading auger, hopper ext., fine cut chopper, 20.8-42 straddle duals, 2,844 sep. hrs., 3,617 engine hrs., ext. reconditioning

2005 John Deere 9760, STS, Contour-Master, deluxe controls, variable spd. feeder house, GreenStar Y&M, high cap. unloading pkg., fine cut chopper, HD lift cyl., HD adj. rear axle, one set concaves, 20.8R38 duals, 18.4R26 rear tires, 3,028 sep. hrs., 4,035 engine hrs., S/NH09760S712064

2001 John Deere 9750, STS, Contour-Master, deluxe controls, RWA, fixed drive, fore/aft, reverser, GreenStar ready, 22′ unloading auger, hopper ext., rock trap, spreader, single pt. hookup, 900/60R32 singles, new 18.4R30 rear tires, 3,735 sep. hrs., 4,877 engine hrs., S/NH09750S691624

1999 John Deere 9610, Level Land, RWA, variable spd. feeder house, Maurer bin ext., rock trap, chopper, chaff spreader, small wire concaves, 18.4-38 duals, 18.4-30 rear tires, 1,883 sep. hrs., 2,874 engine hrs., second owner, S/NH09610X681090

2006 Case-IH 8010, deluxe cab, AFX rotor, rotor reverser, Pro 600 display, Trimble receiver for Y&M mapping, AHHC, RS, rock trap, chopper both sets of concaves, ext. unloading auger, hopper ext., rear trailer hitch, 20.8R42 duals, 600/65R28 rear tires, 3,342 sep. hrs., 4,438 engine hrs., S/NHAJ106616

2004 New Holland CR960, small grain, 2 spd. rotors, variable header drive, Terrain Tracer, deluxe straw chopper, 21′ unloading auger, bottom fan shield, Yield Monitor, 900-32 drive tires, 600-28 steering tires, 2,059 sep. hrs., 2,914 engine hrs., one season on rasp bars, tailing bars & pins, concave, feeder chain, sprockets & chopper knives, S/NHAJ101222

1999 Case-IH 2388, axial flow, 2WD, AFX rotor, Y&M w/new-style moisture sensor, rock trap, chopper, chaff spreader, hopper ext., bubble up auger, unloading auger ext. for 35′ head, rear weights, 18.4-38 duals w/updated rims & bolts, 4,546 sep. hrs., 6,333 engine hrs., New sieve bushing kits, S/NJJC0266189

1999 Case-IH 2388, axial flow, Field Tracker, Y&M, rock trap, chopper, reverser, Crary hopper ext., chaff spreader, 18.4R42 duals, 14.9R24 rears, 3,233 sep. hrs., 4,446 engine hrs., S/NJJC0266253

1996 John Deere 9600, DAS, DAM, fore/aft, variable speed feeder house, hopper ext., grain loss monitor, 30.5-32 front tires, 18.4-26 rear tires, 4,107 sep. hrs., 6,034 engine hrs.

1994 John Deere 9600, AHHC, chaff spreader, chopper, Crary hopper top, near new 30.5-32 tires, 2,732 sep. hrs., 3,892 engine hrs.

1988 John Deere 8820 Titan II, RWD, 22′ auger, chopper, 30.5L-32 front tires, 16.9-26 rear tires, New motor, feeder house, & chaffer, replaced hydro  

1983 John Deere 8820, 2 spd. high inertia cyl., feeder house reverser, John Deere ATU, air foil chaffer, standard chaffer included, electronic moisture meter, chaff spreader, LED lights, 30.5-32 tires, 4,481 hrs., S/NH08820X564347

1993 Case-IH 1688, specialty rotor, rock trap, chaff spreader, large and small wire concaves, 4,646.7 hrs., S/NJJC0120799

1992 Case-IH 1660, CAH, 2WD, Cummins, hydro, yield & grain loss monitors, feeder house reverser, rock trap, chopper, 24.5-30 singles, 14.9-24 rear tires, 5,725 engine hrs., shedded, S/NJJC0102166

New Holland TR97, PRWD, CAH, AHHC, (3) lift cyl., chopper, chaff spreader, 30.5-32 drive tires, 16.9-26 rear tires, 2,454 sep. hrs., 3,159 engine hrs.

John Deere 7700, turbo, straw chopper, 24.5-32 front tires, 13.6-24 rear tires, shows 5,916 hrs.

 

PICKUP HEADS

Case-IH 1015 pickup head, IHC 7-belt pickup

Case-IH 1015 pickup head, Melroe 388 7-belt pickup, shedded

1995 IHC 1015 pickup head, 13′, Westward Melroe 8-belt pickup, Case-IH 2188 hookups

IHC 1015 pickup head, 7-belt pickup

Case-IH 1010 pickup head, 7-belt pickup, fits Case-IH newer series combines, off an 8230

Case-IH 810 pickup head, Melroe 8-belt rubber pickup, S/N1480111U060259

Case-IH 1015 pickup head, Westward Melroe 8-belt steel pickup, S/NJJC0055102

IHC 810 pickup head, 15′, 6-belt pickup, 60/80 Series hookup

(2) IHC 810 pickup heads, 13′, 6-belt pickups, 60/80 Series hookups

1984 IHC 810 pickup head, 13′ w/Melroe 7-belt pickup, IHC 1460 hookups

Case-IH 810 pickup head, Melroe 6-belt pickup

John Deere 914, AHH, large auger, wind guard, wide tires, single pt. hookup S/NH00200X582498

John Deere 914 pickup head, 7-belt pickup

John Deere 912 pickup head, 6-belt pickup, wind guard

John Deere 213 pickup head, John Deere 5-belt pickup

John Deere 212 pickup head, 12′, 5-belt pickup, S/N432372

John Deere 212 pickup head, 12′, 5-belt pickup, S/N372566

(5) John Deere 212 pickup heads, 6-belt pickups

John Deere 212 pickup head, 6-belt pickup, single pt. hookup

(2) John Deere 212 pickup heads, 6-belt pickup

1983 John Deere 200 pickup head, 5-belt pickup, wind guard, 00/10 Series hookup, S/NH00200X582018

New Holland 970 pickup head, Melroe 378 7-belt pickup, S/N957392

 

RIGID HEADS

1995 John Deere 930 rigid head, 12″ SSR quick attach pan system w/reel, 60/70 Series hookup, shedded, S/NH00930P661756

John Deere 224 rigid head, 24′, metal reel, S/N542883

John Deere 220 rigid head, bat reel, good sickle

New Holland 970 rigid head, Bonco quick attach sunflower attachment, 12″ pans, back screen, w/bat reel

 

FLEX HEADS

2014 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, Crary CWS system, S/N1H00635FEE0765625

2014 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, Crary CWS system, S/N1H00635FKE0765629

2014 John Deere 635F flex head, fore/aft, low dam, poly, finger reel, stubble lights, single pt. hookup

2012 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, S/N1H00635FTC0746301

2012 John Deere 635 flex head, full poly, full finger auger, stubble lights, Crary air reel, single pt. hookup, S/N745426

2011 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, S/N1H00635FKB0742010

2011 John Deere 635F flex head, hyd. fore/aft, full finger, stubble lights, single pt. hookup, S/N1H00635FHB0740704

2011 John Deere 635F flex head, low dam, full finger auger, finger reel, poly, AHH in rigid mode, hyd. fore/aft, Crary CWS air bar, 60/70 Series hookup

2011 John Deere 635F flex head, low dam, full finger auger, finger reel, poly, AHH in rigid mode, hyd. fore/aft, Crary CWS air bar, 60/70 Series hookup

2011 John Deere 635 flex head, 35′, poly, low dam, stubble lights, CWS wind bar, S/N740734

2011 John Deere 635 flex head, 35′, poly, low dam, stubble lights, CWS wind bar, S/N740647

2010 John Deere 635F flex head, 35’, flip over finger reel, low dam, long & short snouts, poly, stubble lights, 70 Series hookup, S/N1H00635FFTA0736980

2010 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, S/N1H00635FPA0737435

2007 John Deere 635F flex head, low dam, long poly dividers, CWS air bar, New sickle, S/N720988

2005 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, S/NH00635F712091

2004 John Deere 635F flex head, 35′, fore/aft, finger reel, poly, low dam, stubble lights, single pt. hookup, S/NH00635F706790

 

2007 John Deere 635 flex head, full poly, full finger reel, stubble lights, Crary air bar, single pt. hookup, sickle bar recently replaced

2010 John Deere 630F flex head, low dam, AHH with rigid mode, Lankota short dividers, AWS air bar, S/N735969

2004 John Deere 630F flex head, 30’, full finger auger, low dam, S/NH00630F705806

John Deere 630F flex head, full finger, low dam, AWS wind bar, 9600 hookup

John Deere 930F flex head, fore/aft, finger reel, John Deere hookup, S/NH00930F676627

John Deere 930F flex head, fore/aft, finger reel, John Deere hookup, S/NH00930F661445

John Deere 930F flex head, fore/aft, finger reel, John Deere hookup, S/NH00930F677253

John Deere 930F flex head, fore/aft, finger reel, John Deere hookup, S/NH00930F669155

John Deere 930F flex head, fore/aft, finger reel, John Deere hookup, S/NH00930F671227

John Deere 930F flex head, poly skids, finger reel, Case-IH adapter, S/NH00930F697703

1998 John Deere 930 flex head, 30′, finger reel, poly, hyd. fore/aft, poly snouts, 00/10 Series hookup, S/NH00930F677526

1993 John Deere 930 flex head, 30′, finger reel, poly, hyd. fore/aft, steel snouts, Crary air reel, 00/10 Series hookup, S/NH00930F651424

1992 John Deere 930 flex head, 30′, finger reel, poly, hyd. fore/aft, steel snouts, Crary air reel less fan & gearbox, 00/10 Series hookup, S/NH00930F646331

1990 John Deere 930 flex head, 30′, poly, Crary air reel, 00/10 Series hookup, S/NH00930P635609

John Deere 930 flex head, good sickle, finger reel

John Deere 930 flex head, 30′, low dam, full finger reel, stubble lights, 96 Series hookup

1993 John Deere 925 flex head, 25′, DAS, finger reel, plastic bats, S/NH00925F651748

John Deere 925 flex head, full finger reel, poly, 10 Series hookup, S/NH00925P646165

2013 Case-IH 3020 TerraFlex, 35′, finger reel, hyd. fore/aft, SS floor, double drive, 3″ cut, single pt. hookup, 1,500 acres, single owner, shedded, S/NYCZL62284

2010 New Holland 74C flex head, 30′, hyd. fore/aft, full finger auger, finger reel, single pt. hookup, S/NY9ZL25006

2004 Case-IH 1020 flex head, 30′, finger reel, AHH, poly, CWS air bar, New sickle

Case-IH 1020 flex head, 30′, finger reel, hyd. fore/aft, lights, S/NJJC0223570

Case-IH 1020 flex head, 30′, Crary air system, converted for IHC 7088 w/adapter

Case-IH 1020 flex head, 25′, finger reel, auto header height

New Holland 973 flex head, 30′, steel dividers, finger reel, S/N628943

 

DRAPER HEADS

2013 John Deere 635D draper head, 35′, fore/aft, finger reel, AHH, slow speed transport, S/N1H00635DHDR755376

2012 John Deere 635FD flex draper, 35′, fore/aft, dual knife drive, finger reel, feed drum scraper kit, header height sensor in rigid mode, S/N1H0635FDJC0745374

2004 Case-IH 2062 flex draper, 36′, hyd. fore/aft, finger reel, single pt. hookup, New canvas

1998 MacDon 962 draper head, 30′, finger reel, with Flexxifinger sunflower/corn pans, S/N121337

 

CHOPPING CORN HEAD

2013 Geringhoff RD1600/B Elite XL corn head, 16×30″, rigid, vertical slice, ICF sweeper w/fore/aft, Headsight, aluminum self adj. slip gear boxes w/sealed oil system, (15) carbide knives w/snapping rolls, self-sharpening cutting edge, triple protection slip clutch system row units, hyd. end gathering rollers, hyd. deck plates, flasher lights, single pt. hookup, used 3 seasons, S/N1101306721630/B

2009 Harvestec 4212C chopping corn head, 12×22″, hyd. deck plates, 60/70 Series hookup, S/N009066

2009 Drago N12TR chopping corn head, 12×30″, knife rolls, self adj. deck plates, Headsight

2008 New Holland 99C chopping corn head, 8×30″, hyd. deck plates, wired for Terrain Tracer, single pt. hookup, S/N626542006

2003 Drago N8TR chopping corn head, 8×30″, knife rolls, (3) Headsight sensors, adapter plate for Case-IH 8010, S/N21853

2007 Geringhoff RD1200B chopping corn head, 12×22″, hyd. deck plates, green poly snouts, AHH, S/N954771222/B

2005 Geringhoff RD800/B chopping corn head, 8×30″, hyd. deck plates, RowSense, stalk stompers, set up for John Deere, S/N90245830

2002 Geringhoff RD corn head, 12×22″, poly snouts, John Deere 70 Series, S/N93792122/B

2012 John Deere 618C chopping corn head, 18×22″, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00618CJCC745285

2012 John Deere 612C chopping corn head, 12×30″, hyd. deck plates, RowSense, knife rolls, stubble lights, S/N1H00612CCCC746303

2011 John Deere 612 chopping corn head, 12×22″, hyd. deck plates, knife rolls, stubble lights, S/NH0612CCTB0740170

2013 John Deere 608C chopping corn head, 8×30″, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00608CEDC756940

2008 John Deere 608C chopping corn head, 8×30″, hyd. plates, HH & knife rolls, stubble lights, single pt. hookup, 400 acres after John Deere service, S/NH0608CC725208

 

NON-CHOPPING CORN HEADS

2017 Baldan corn head, 12×22″, Bondiolo and Pavesi deck plates, set up for Case-IH 7000-9000 Series combines, New, over 2,500 running worldwide, warranty will cover 2017 fall harvest through April 1st, 2018, parts available through dealers in ID and CO, also factory direct

2006 Case-IH 2208 corn head, 8×30″, poly snouts, knife rolls, hyd. deck plates, header height control, single pt. hookups, S/NCBJ031069

2001 Capello non-chopping corn head, 12×22″, manual deck plates, knife rolls, adapters for Case-IH 88 Series and 8010 and newer, low acres

2009 John Deere 612C non-chopping corn head, 12×30″, hyd. deck plates, RowSense, standard rolls, stubble lights, S/NH0612CX731186

John Deere 1293 corn head, 12×30″, poly snouts, standard rolls, hyd. deck plates

2003 John Deere 893 corn head, 8×30″, knife rolls, hyd. deck plates

John Deere 893 corn head, 8×30″, poly snouts, knife rolls, hyd. deck plates, cob saver, single pt. hookups, S/NH00893X690545

1995 John Deere 894 non-chopping corn head, 10×22″, knife rolls, 900 Series row units, GVL poly snouts, 70 Series hookup, S/NH00894M660752

Case-IH 1064 corn head, 6×36″, standard rolls, S/NJJC0071090

Case-IH 883 corn head, 8×22″, GVL poly snouts

Case-IH 863 corn head, 6×30″, 900 acres on new knife rolls

IHC 863 corn head, 9×22″, standard rolls, S/N0730101U030570

John Deere 843 corn head, 8×30″, metal snouts

John Deere 643 corn head, 6×30″, steel snouts, (2) seasons on new sprockets & chains

John Deere 643 corn head, 8×22”, metal snouts, flashers, oil bath end drives

Clarke Machine corn head, 12×22”, conventional rollers, poly snouts, John Deere 10 Series hookup, oil bath end drives

 

SUNFLOWER & BEAN HEADS

John Deere 853A all crop head, 8×30″, sunflower sides & back screen, 60/70 Series hookup, shedded, S/N477404

1978 John Deere 853 all crop head, 8×30″, 00/10 Series hookup, S/N347702H

John Deere 853 all crop head, 8×30″, sunflower sides & back screen, 60/70 Series hookup, shedded, S/N247992H

John Deere 214 pickup head, Pickett 14′ bean pickup, 60/70 Series hookup

Sund bean pickup, 14′, low acres

 

SWATHERS

Hesston 1200 pull-type swather, 25′, auto fold, bat reel, belts & canvases stored inside

John Deere 590 pull-type swather, 25′, auto fold, bat reel

Case-IH 8220 pull-type swather, 25’, bat reel, 1000 PTO

Case-IH 721 pull-type swather, 21′, bat reel, auto fold, 1000 PTO, pickup guards

Premier auto fold swather, 21′, bat reel, pickup guards, stored inside 113920

International 4000 swather, 19′, S/N1310000C0002362

Versatile pull-type swather, 18′

Versatile 400 self-propelled swather, 18′, cab w/evapo cooler, hydro, stored inside, New battery

Versatile 400 self-propelled swather, 18’, Ford 6 cyl. gas, hydrostatic

 

GRAIN CARTS & GRAVITY WAGONS

2014 Brent 1196 grain cart, 1,100 bu., 21″ auger, hyd. spout adj., roll tarp, scale, 1000 PTO, walking tandems, 520/85R42 tires, S/NB32510124

2014 Brent 1196 grain cart, 1,100 bu., 21″ auger, hyd. spout adj., roll tarp, scale, 1000 PTO, 76x50x32 tires, S/NB32460158

2004 Brent 1084 Avalanche grain cart, 1,050 bu., 20″ adj. unloading auger, factory roll tarp, large 1000 PTO, chain drive, walking tandems, 18.4R42 tires, S/NB19390133

2004 J&M 875 grain cart, 17″ corner auger, hyd. spout adj., roll tarp, 30.5-32 tires

1999 Brent 874 grain cart, 17″ unloading auger, Digi-Star scale, 30.5L-32 tires, S/NB1636105

Brent 620 grain cart, 24.5-32 tires, 1000 PTO, S/N85-62022

Brent 420 grain cart, 450 bu., side auger, 24.5-32 single tires, 1000 PTO

Brent 410 grain cart, scale, 1000 PTO, 23.1-26 tires

Kinze 1200 grain cart, 1,200 bu., roll tarp, 24.5-32 tandems, 1000 PTO

E-Z Trail 475 grain cart

Ficklin CA9600 grain cart, 500 bu., 10″ unloading auger, roll tarp

Killbros 500 gravity wagon, 12 ton running gear, heavy duty tires

Killbros 500 grain wagon, New roll tarp

Killbros 490 grain cart, hyd. folding auger, auger light, rear ball hitch, 1000 PTO, 23.1-26 diamond tires, S/NK9-2155

Weigh wagon, 120 bu., scale, gas motor

 

AIR DRILLS & DRILLS

1994 Case-IH 8600 air drill, 30′, 6″ space, dry fertilizer, full run monitor, hyd. fold markers

Flexi-Coil 5000 air drill, 45′ w/Flexi-Coil 2320 cart

Wil-Rich 4152 air seeder, 42-1/2′, 25 hp. gas fan

John Deere 1900 tow-behind commodity cart, twin tank, 350 bu., hyd. fan, fill auger

John Deere LLA drills, three 12’s, 6″ spacing

John Deere 520 drill, 3 pt., 10″ space, hyd. markers

Case-IH 620 drill, 12′, 6″ spacing, S/N0390172C005645

Flexi-Coil 3450 tow-between commodity cart, 3-compartment, variable drive, 10” fill auger

John Deere 9300 press drill, factory transport, hyd. folding markers

 

PLANTERS

Kinze fold-behind planter bar, 24×30″, John Deere MaxEmerge units, 1.5 bu. hoppers, mechanical drive, plumbed for fertilizer, rubber closing wheels, no markers

John Deere 7000, Precision Planting, 16×30″, 3 pt., front fold, adj. gauge wheels, plumbed for liquid fertilizer, folding markers

John Deere 7000 planter, 8×30″, hyd. markers, drawbar pull, 1.5 bu. hoppers, 30 gal. fertilizer tank w/electric pump

John Deere 71 single row garden planter w/beet plate

 

CHISEL PLOWS

2002 Summers chisel plow, 44′, 12″ spacing, 4″ twist shovels, Summers 106 3-bar harrow, S/NB1086

Flexi-Coil 340 chisel plow, 40′, 12″ space, 2″ spikes, walking tandems across, single pt. depth, heavy duty 3-bar harrow, rear hitch, Raven NH3 Super Cooler, John Deere rate controller, S/NU085245-00

Flexi-Coil chisel plow, 40′, dry fertilizer setup, 15″ spacing

Wil-Rich chisel plow, 37′

IHC 5500 chisel plow, 31′, harrow

IHC 5500 chisel plow, 27’, walking tandems main, 3-bar harrow

Case-IH 5800 chisel plow, 25’, walking tandems across, 3-bar harrow

1998 John Deere 680 chisel plow, 33′, single pt., walking tandems across, 3-bar harrow

John Deere 680 chisel plow, 33’, 3-bar harrow

John Deere 1610 chisel plow, 38′, set up with shop-built concave discs, 3-bar harrow

John Deere 1600 chisel plow, 35′, Inland 3-bar harrow, rear hitch and John Blue nitrolator

John Deere 1600 chisel plow, 19′, walking tandems, 4′ beavertail shovels, rear hitch

John Deere 1600 chisel plow, 29’, walking tandems across, rear hitch

1995 Krause chisel plow, 25′, flat fold wings, front cushion disc

(3) Melroe 505 chisel plows, 27-1/2′, 3-bar harrows

John Deere 610 chisel plow, 28’

 

DISC RIPPERS, COULTER CHISELS, MULCH TILLERS, & DISC FINISHER

2014 John Deere 2720 disc ripper, 22-1/2′, 9 shank, 30″ space, parabolic cushion trip, knock-out scrapers, 7″ points, single pt. depth, walking tandems, Cat V hitch, wing gauge wheels, S/N1A82720XKE0755109

2011 John Deere 2700 disc ripper, 17-1/2′, 7 shank, 30″ space, 7″ points, single pt. depth, walking tandems, rear disc levelers, S/N1N02700XPB0740302

2012 Case-IH 870 disc ripper, 26′, 13 shank, front & rear discs, 5-bar spike tooth harrow

2005 John Deere 512 disc ripper, 17-1/2′, 7 shank, 30″ space, single pt. depth, walking tandems,3-bar harrow, S/NN00512X003635

DMI Coulter Champ II ripper, 13 shank, 16′, 15″ spacing, rear leveling S-tines

(2) DMI 730B disc rippers, 7 shank, leveling discs

Flexi-Coil S-tine, 40′, coil packers

2013 Summers 106 disc chisel, 26′, walking tandems, 4-bar harrow

2009 Wil-Rich 657 DCR disc chisel, 28′, 3-bar harrow

2007 Wil-Rich 657 DCR disc chisel, 28′, walking tandems, 1,400 lbs. spring cushion shanks, 4″ twist shovels, concave coulters, 3-bar coil tine harrow

2007 Summers Supercoulter, 40′, 22″ discs, 3-bar harrow, S/NG0231

Sunflower 4510 disc chisel, 18.75′, 15 shanks, 21″ front discs, 22″ rear discs, scrapers, hyd. adj. discs, S/N04510620020019

1992 Unverferth Brent CPC2000 disc ripper, 7 shank, manual depth control

White 435 disc chisel, 18′, 5-bar spike tooth harrow

White 445 coulter chisel, 25′, 3-section, walking tandems on main frame, Summers heavy duty 3-bar harrow

John Deere 1710A mulch tiller, 18′

Sunflower disc finisher, 25′, 22″ discs, 5-bar harrow, NH3 applicator, 9″ shovels

DMI Coulter Champ II, 13 shank, 14’, 3-bar harrow

 

PLOWS

IHC 800 plow, 12×18″, spring reset, hinged, (12) coulters

Wil-Rich 2900 plow, 10×18″, hinged, walking tandems

Allis Chalmers 2500 plow, 8×16″

Melroe 903 plow, 7×18″

Melroe 903 plow, 7×16″

John Deere 3600 plow, 8×16″, S/N00043

John Deere 3100 plow, 5×16″ w/hitch, stored inside

John Deere 3100 plow, 4×16″, stored inside

(2) John Deere 3100 plows, 4×16″, w/hitch

IHC auto reset plow, 6×16”

IHC auto reset plow, 5×16”

IHC pull-type plow, 5 bottom

Plow, 2 bottom, 3 pt., off Ford tractor

 

VERTICAL TILLAGE & ROLLING HARROWS

2012 Unverferth 1225 rolling harrow, 63′, hyd. fold, single basket tumblers

Phillips 4505 rotary harrow, 45′, hyd. fold, S/N78498

2010 Horsch Anderson Joker PT3000, 30′, 20″ discs, hyd. down pressure, depth control

Salford RTS570, 36′, walking tandems, rolling baskets, weight pkg., 3-bar harrow, less than 1,000 acres on discs

2004 Wishek 824NT disc, 26′, rotary scrapers

 

DISCS

Wishek 842T tandem disc, 24′, rock cushion, 24″ blades, standard scrapers, E13.50/85R16 tires, S/N1929724

Wishek rock flex disc, 34′

Krause 4990 disc, 32′, rock flex, scrapers, rear hitch

John Deere 331 tandem disc, 30′, hyd. fold, scrapers, tandems across, New tires on main frame

Case-IH 496 tandem disc, 24’, 9” space, dual carrier wheels

IHC 470 tandem disc, 20′, tandem wheels, scrapers, very few acres on blades & bearings, S/N047000U017237

Summers Series 10 diamond disc, 32-1/2′, leveling discs, 9″ spacing, Summers 104 3-bar harrow

 

FIELD CULTIVATORS

2007 John Deere 2210 field cultivator, 55′, 6″ spacing, AccuDepth, knock-on shovels, 2-bar harrow, rolling baskets, S/NN02210X008412

John Deere 2200 field cultivator, 64-1/2′, tandems across, TruPosition depth, 7″ sweeps, John Deere 4-bar harrow

Case-IH Tigermate II field cultivator, 54′, 5-section fold, walking tandems across, single pt. depth, wing gauge wheels, 4-bar harrow

John Deere 730 cultivator, 44′, converted to 5-bar frame, knock-on shovels

(2) IHC 4500 field cultivators, 28’, w/harrows

Morris cultivator, 25′, Gandy box, sweeps, 3-bar harrow

Wil-Rich field cultivator, 45′, 7″ shovels, 4-bar harrow

Cultivator, 3 pt., off Ford tractor

 

HARROWS

Brandt Commander 7000 heavy duty harrow, 70′, hyd. down pressure, 9/16″ tines, carbide tip

Melroe harrow, 60′, 5-bar, 8.5L-14 tires

McFarlane harrow, 60’, spike tooth

Summers harrow, 60’, auto fold, 5-bar sections

Summers pull-type 4-bar harrow, 55′, 5-section fold, with rolling choppers

Rugby multiweeder, 42′, 3-bar harrow

Western harrow, 62’, 4 rank

Harrow, 40’, off John Deere 1000 field cultivator

Harrow, 37’, off IHC 4700 field cultivator

 

SUGARBEET EQUIPMENT

Red River harvester, 6×30″, all poly grab rolls, boom ext., extra struts to make 8×22″, 1000 PTO, shedded

Red River/Wil-Rich sugarbeet harvester, 8×22″, rear ferris wheel, boom ext., poly on smooths, water kit, 1000 PTO

Amity R998 harvester, 8×22”, row finder, hyd. rear scrub, poly grab rollers, 1000 PTO, S/NH302400, low acres on WIC wheels, shedded

Amity R998 harvester, 8×22”, row finder, hyd. rear scrub, 1000 PTO, S/NH306701

1998 WIC harvester, 6×22”, row finder, 1.5 ton tank, rear scrub chain

2013 H&S 3042 beet cart, 42” belted folding elevator, water kit w/300 gal. tank, Hypro hyd. pump, 1000 PTO, 900/60R32 tires

Alloway defoliator, 6 row

WIC defoliator, 12×22″ w/scalpers

1987 Artsway defoliator, 6×22”, steel fronts, scalpers

BEAN EQUIPMENT

Halvorson hyd. rod weeder, 6×30″, 3 pt.

UFT bean cutter, 6 or 8 x 30″, S/N7982

 

ROW CROP CULTIVATORS

John Deere 875 row crop cultivator, 12×30″, 3 pt. mount, C-shank, rolling shields, 4 gauge wheels

Wil-Rich cultivator, 12 row, HD shanks, guide discs, pneumatic gauge wheels

Lilliston rolling cultivator, 6×30”, 3 pt.

 

STALK SHREDDERS

Alloway stalk shredder, 20′

Brady stalk shredder, 20′

John Deere 220 pull-type high speed shredder, 20′, end transport, New rotor bearings & balance

Woods Alloway shredder, 20′, 6-wheels, drawbar pull, 1000 PTO

Woods Alloway shredder, 20′, 6-wheels, drawbar pull, 1000 PTO, S/N21672

Loftness 264BP-SSG pull-type shredder, 24’, small 1000 PTO, S/N5-Q-2-69

 

SLEEPER SEMI TRACTORS

2010 Kenworth T800, twin screw tandem axle, 70” AeroDyne sleeper, 455 ISX Cummins, Eaton Fuller 13 spd., air ride, air slide 5^th, navigation system, sunroof, A/C, tilt, cruise, twin stacks, dual 120 gal. aluminum fuel tanks, 3:55 ratio, 22.5 low pro tires on aluminum rims, 678,000 miles, complete engine OH 12/2015 w/warranty until 12/2017, air to air, regen, transmission in 2016, service records available

2009 Peterbilt 386, 63” standup sleeper, Unibilt Ultracab, C13 Cat, 470 hp., 13 spd., Pete low leaf air ride susp., air slide 5^th, navigation system, A/C, tilt, cruise, twin stacks, dual 120 gal. aluminum fuel tanks, 3:55 ratio, 22.5 low pro tires on aluminum rims, 700,000 miles, Cat Platinum OH (4 year warranty), service records available

2007 Freightliner Columbia, mid-roof sleeper, C13 Cat, turbo, Eaton Ultrashift automatic, air ride cab & susp., air slide 5th, 240″ WB, 850,000 miles, water pump & valve actuator replaced within 12 months

2007 Kenworth T800, Aero Cab, 62″ flat top sleeper, ISX Cummins, 10 spd., jake brake, air ride, power steering, dual aluminum fuel tanks, 3:70 ratio, 12,000 lb. fronts, 40,000 lb. rears, 11R22.5 tires on aluminum wheels, shows 481,536 miles

2006 Volvo 630, mid-roof sleeper, Volvo, 465 hp., Meritor 10 spd., air ride, air slide 5th, 55 gal. wet kit w/”Hotshift” PTO, (2) 150 gal. fuel tanks, 237″ WB, 3:55 ratio, half fenders, 11R22.5 low pro tires on aluminum rims, 899,441 miles

2005 Freightliner Columbia, twin screw tandem axle, 70” extra tall sleeper, Mercedes, 450 hp., Eaton Fuller 10 spd., engine brake, air ride, stationary 5^th, cruise, diff lock, A/C, dual 100 gal. aluminum fuel tanks, 3:73 ratio, 22.5 low pro tires on aluminum rims, approx. 1,100,000 miles, New exhaust, turbo, oil sensors, records available 

2004 Freightliner Columbia, twin screw tandem axle, 70” extra tall sleeper, Detroit, 450 hp., Eaton Fuller 13 spd., engine brake, air ride, air slide 5^th, cruise, diff lock, A/C, twin stacks, dual 100 gal. aluminum fuel tanks, 3:70 ratio, 22.5 low pro tires on aluminum rims, approx. 1,100,000 miles, extensive work within last year, service records available

2001 Volvo VNM670, 50″ sleeper, VED12 Volvo, 465 hp., Super 10 spd., air ride seat & susp., twin aluminum tanks, 216″ WB, 22.5 tires on aluminum rims, shows 34,700 miles, (3) New batteries

1999 Freightliner Century Class, C12 Cat, 10 spd., 818,105 miles

1999 Kenworth W900 tandem axle, 60″ Aerocab sleeper, N14 Cummins, 525 hp., Eaton 13 spd., engine brake, 8-bag air susp., air slide 5th, cruise, diff lock, Thermaflow SS wet kit w/aftercooler, dual exhaust, SS air cleaners, dual aluminum fuel tanks, 264″ WB, 3:55 rears, 285/75R24.5 tires on aluminum rims, shows 47,170 miles, New cap drive tires

1998 Freightliner Century, 60″ flat top sleeper, 60 Series Detroit, 425 hp., 9 spd., engine brake, air ride, air slide 5th, cruise, diff lock, 250″ WB, 3:73 rears, 295/75R24.5 tires, front aluminum rims, 1,101,355 miles

1997 IHC 9300, sleeper, 3406E Cat, 455 hp., Eaton 13 spd., sliding 5th wheel, rear locker, 3:70 rear axle, 285R24.5 tires, shows 1,498,000 miles

1994 Freightliner, flat top sleeper, N14 Cummins, 9 spd., air ride, air slide 5th, twin aluminum fuel tanks, 11-24.5 tires on steel rims, shows 1,027,000 miles, engine OH 30,000 miles ago

1983 Peterbilt 359, flat top sleeper, 3406 Caterpillar, 15 spd., aluminum wheels, 285/75R 24.5 tires, shows 912,016 miles

 

1982 IHC C90 cabover, 400 Cummins, air susp., adj. plate, pintle hitch, 11R24.5 tires, front aluminum rims, 391,000 miles

 

NON-SLEEPER SEMI TRACTORS

2013 IHC Paystar, day cab, 12.7L MaxxForce engine, 410 hp., autoshift, air ride, fixed 5th wheel, 12,000 lb. front, 40,000 lb. rear, 188″ WB, 11R22.5 tires on steel rims, 107,000 miles

2007 IHC 8600, day cab, ISM Cummins, 430 hp., 10 spd., jake brake, air ride, power steering, dual aluminum fuel tank, 12,000 lb. fronts, 40,000 lb. rears, 11R22.5 tires on aluminum wheels, 657,000 actual miles

2007 Sterling single axle, 14L Detroit, 515 hp., 7 spd.

2007 Volvo VNL64T300, day cab, 12L Volvo, Eaton Fuller 10 spd., air ride, sliding 5th, wet kit, 100 gal. aluminum fuel tank, diff lock, quarter fenders, 295/75R22.5 tires on aluminum rims, 743,981 miles

2005 Volvo VNL64T300, day cab, 10 spd., VED12 Volvo engine, 465HP, engine brake, 3.73 ratio, 22.5 tires, 187” WB, 12,000lb front axle, 40,000lb rear axles, duel aluminum fuel tanks, aluminum wheels, power steering, air ride, 600,000 miles

2005 Kenworth T600, day cab, C15 Cat, Eaton Fuller 10 spd., jake brake, AG380 susp., 12,000 lb. fronts, 40,000 lb. rears, 242″ WB, aluminum wheels, air slide 5th, 11R22.5 tires, 510,000 actual miles

2004 Freightliner Columbia CL120, day cab, 60 Series 14L Detroit, 455 hp., 10 spd., air slide 5th, wet kit, 171″ WB, 11-22.5 tires, shows 800,000 miles

2004 Volvo VNL tandem axle, day cab, ISX 450, 12 spd. autoshift, air ride, air slide 5th, 2-line wet kit, aux. air lines, half fenders, low pro 22.5 tires on aluminum rims, 770,000 miles

2002 Mack CH613, day cab, AC 355/380, Eaton 10 spd., air ride, wet kit w/tank, twin aluminum 250 gal. fuel tanks, 22.5 tires on aluminum rims, 928,000 miles

2002 Volvo VNL tandem axle, day cab, VED12 Volvo, 345 hp., 7 spd., air susp., air slide 5th, diff lock, cruise, 180″ WB, 2:93 rears, 295/75R24.5 tires, 6 aluminum rims, shows 692,250 miles

2001 Volvo single axle, 375, D12 automatic, engine brake, air ride, cruise, power mirrors, diff lock, 22.5 tires on steel rims, 434,275 miles

2001 Freightliner FLD120, day cab, N14 Cummins, 10 spd., air ride, sliding 5th, diff lock, wet kit, dual aluminum fuel tanks, low pro 22.5 tires on steel rims, 454,000 miles

2001 Freightliner FLD112, day cab, M11 Plus Cummins, 10 spd., air ride, diff lock, wet kit, dual aluminum fuel tanks, 664,000 miles

2000 IHC 9100I tandem axle, day cab, N14 Cummins, 435 hp., 10 spd., air susp., diff lock, cruise, 295/75R22.5 tires on steel rims, 416,250 miles

1998 Mack CH613, day cab, Mack, 427 hp., Eaton Fuller 10 spd., Mack susp. & rear ends, wet kit, 11R22.5 tires, shows 98,548 miles

1998 Freightliner FLD120SD, day cab, N14, 10 spd., spring ride, air slide 5^th, cruise, wet kit (no oil), diff lock, dual 120 gal. aluminum fuel tanks, 3:90 ratio, 285/75R24.5 tires, 275/80R24.5 tires, steel rims, 431,000 miles, A/C needs charging

1996 Volvo tandem axle, day cab, N14 Cummins, 10 spd., shows 206,000 miles

1995 IHC 8200 tandem axle, day cab, 60 Series Detroit, 365 hp., 9 spd., air susp., stationary 5th wheel, cruise, diff lock, 166″ WB, 11R22.5 front tires, 295/75R22.5 rear tires, steel rims

1994 Peterbilt 378, day cab, 3406E, 13 spd., jake brake, air ride, air slide 5th, 24.5 tires, 1,617,000 miles, less than 250,000 miles on OH

1993 Ford 9000 twin screw, day cab, Cat, 10 spd., tilt steering wheel, saddle tanks, 11R22.5 tires

1990 Kenworth W900, day cab, Detroit, 430 hp., 13 spd., air ride, sliding 5th, dual stacks, dual 150 gal. aluminum fuel tanks, 11R24.5 tall tires, New air compressor, fan clutch, belts, water pump & 5th wheel kit

1986 Kenworth W900 twin screw, day cab, 855 Cummins, 13 spd., shows 472,000 miles

1985 Freightliner, tandem axle, day cab, 855 Cummins, 9 spd., spring susp., Saf-T-Pull hitch, 2-line wet kit, 11R22.5 front tires, 11R24.5 grip rear tires, shows 250,000 miles

 

BOX TRUCKS

1998 Kenworth T800 tri-drive, quad axle, 11.1L Detroit, 9 spd., spring susp., air up/down pusher axle, Loadline 24′ box, hoist, roll tarp, combo gate, 315/80R22.5 front tires on aluminum rims, 11R24.5 rear tires on steel rims, shows 535,000 miles

1966 IHC 1890 Loadstar tag tandem, Detroit, Roadrunner 9 spd., Frontier 18′ box

1993 Freightliner FLD112 twin screw, pusher 3rd axle, 3176 Cat, 10 spd., 22′ box, combo gate, roll tarp, 100 gal. aluminum fuel tank, diff lock, 11R24.5 rear tires on steel rims, 263,988 miles

1989 Ford tag axle, 429 gas, 5&2 spd., Rugby 20′ box

1985 GMC General, L10 Cummins, 7 spd., Frontier 20′ box, Galion twin cyl. hoist, shows 817,000 miles

1984 GMC Brigadier twin screw, 300 Cummins, 13 spd., 20′ box, hoist, roll tarp, combo gate, cab guard

1982 GMC 7000 tag tandem, 366 gas, 5&2 spd., Buffalo 20′ box, 3 pc. endgate, roll tarp, plumbed for drill fill, 10:00-20 front tires, 9:00-20 rear tires

1980 GMC Brigadier tandem axle, 692 Detroit, 7 spd., spring susp., 20′ box, hoist, roll tarp, 11R22.5 tires, unknown miles, weak engine

1980 GMC, 3rd pusher axle, Detroit diesel, 9 spd., 20′ box

1979 Chevrolet C70 Cheyenne twin screw tandem, 427 V8, automatic, spring ride, Midland 19’ box, 54” sides, combo gate w/center & grain doors, (2) 50 gal. fuel tanks, diff lock, hyd. brakes, Saf-T-Pull hitch, 13/80R20 front tires, 10:00-20 rear tires

1975 Chevrolet C65 twin screw, 454, 5&4 spd., 5’x18′ box, roll tarp, integrated beet gate, plumbed for drill fill, air brakes, step & saddle fuel tanks, 70% tires, 87,600 miles

1975 Ford F700 tag tandem, 4&2 spd., 19′ box, double acting hoist, roll tarp, 9:00-20 tires, 62,500 miles

1974 GMC 6500 lift tag, 366, 5&2 spd., 20′ box, wood floor, roll tarp, 7,000 lb. front, 15,000 lb. rear, 9:00-20 tires, shows 57,859 miles

1974 Chevrolet C65, twin screw tandem, 427 V8, automatic, spring ride, Frontier 18-1/2’ box, 2 cyl. hoist, combo gate w/center & grain doors, roll tarp, plumbed for drill fill, (2) 50 gal. fuel tanks, throttle lock, diff lock, air brakes, 13/80R20 front tires, 10:00R20 rear tires, Dayton rims, shows 51,657 miles

1973 IHC 1800 Loadstar tandem, V8, 5&3 spd.

1970 Chevrolet C50 tag tandem, 350 V8, 5&2 spd., 18′ box, roll tarp, 9:00-20 tires on drivers, 8:25 tires on steer and tag axles

1963 IHC 1700, 2-1/2 ton, tag tandem, V8, 5&2 spd., Westgo 22′ steel box

1976 GMC C6000 single axle, 350 gas, 4&2 spd., 14-1/2′ box, double acting hoist, roll tarp, 9:00-20 tires, 22,000 miles

1974 Chevrolet C60 single axle, 350, 4&2 spd., 16′ box, hoist, tarp, plumbed for drill fill

1972 Chevrolet C50 single axle, 350, 4&2 spd., box, hoist, 9:00-20 tires, 43,620 miles

1971 Chevrolet C50 single axle, 350, box, hoist, 9:00-20 tires, 57,254 miles

1964 Chevrolet single axle, 1 ton, 6 cyl. gas, 4 spd., 12′ box, hoist

 

SERVICE TRUCK

2004 Ford F550 XL, 6.0L diesel, automatic, 4WD, 11′ flatbed, 305 gal. fuel tank w/12v pump, duals, 52,685 miles with hyd. pump, 12v, rear quick couplers; Industrial Air compressor, Honda 11 hp. engine, electric start & hose reel; Miller Bobcat 225 Plus welder generator, 8000 watt, AC/DC; plug-in jumper cable box w/cables, Snap-on HD road chest toolbox; Weatherguard Pack Rat toolbox; vise; receiver hitch; Weatherguard 18″x48″ toolboxes w/bolt bins; (2) Weatherguard 18″x48″ underbody toolboxes; oxyacetylene welder w/hose reel, no tanks

 

DUMP TRUCKS

1999 Sterling tri-axle, 3126B Cat, Allison MD3560 automatic, 16’ dump box, 6.43 ratio, 434,000 miles

1991 GMC Topkick single axle dump truck, 3116 Cat, 10 spd., like new Rugby 10′ box, 204,710 miles

1990 IHC 9300 twin screw, 3406 Cat, 10 spd., 15′ gravel box, 22.5 tires

1988 Ford LT9000 tri-axle, 3406C Cat, RTF609A trans., dump box, 3:55 ratio, shows 686,548 miles

1980 Ford 800 tandem axle, 370 V8 gas, automatic, dump box, 3:73 ratio, PTO, shows 93,241 miles

1963 Ford single axle dump truck, 6 yd. steel gravel box

 

 

CAB/CHASSIS & OTHER TRUCKS

2008 GMC 6500, cab & chassis, Isuzu diesel, 230 hp., automatic, spring susp., 204″ frame behind cab, PTO less pump, 8,000 lb. front axle, 17,500 lb. rear axle, 245/70R19.5 tires on steel rims, shows 349,000 miles

1987 Ford L8000 single axle, diesel, 10 spd., 22.5 tires, shows 476,000 miles

1995 GMC Topkick digger derrick, 3116 Cat, 10 spd., air brakes, 4WD 

1992 IHC 4900 single axle, DT466, automatic, spring susp., Airflow stainless steel 9′ sander, electric drive, diff lock, 12,000 lb. front axle, 21,000 lb. rear axle, 178″ WB, 11R22.5 tires, shows 111,835 miles, 5,370 hrs.

1985 IHC S1900 twin screw, 466, automatic, w/large hyd. tree spade, 10:00-20 tires

1974 Mack U tandem axle, 5th wheel, less than 700,000 miles

Mack R twin screw with cement mixer

1973 Road Boss water/spray tender truck, 3,300 gal. tank, Honda 2″ pump, mileage unknown

 

BUS

2008 Ford F450 Super Duty single axle transit bus, 6.0 liter diesel, automatic, 16 seats, swing door, electric ramp w/lift, emergency roof hatch, A/C, radio, 225/75R16 dual tires, 218,901 miles

 

PICKUPS

2007 Chevrolet 3500HD, 1 ton, crew cab, long box, 6.6L Duramax, Allison trans., cloth, AM/FM/CD, locked up turbo, transmission needs rebuild, axle seal out, front diff & 4WD are bad, (1) bad injector

2005 Chevrolet, ext. cab, long box, Duramax 6.6 liter diesel, automatic, 4WD, A/C, radio/CD, tilt, cruise, bedliner, 8′ steel headache rack, 189,000 miles, 179,770 miles, fresh transmission oil change

2003 Chevrolet Silverado 1500, ext. cab, 5.3L, automatic, 4WD, Z71 pkg., tow pkg., 203,000 miles

2000 Chevrolet 1500 Silverado, ext. cab, 6′ box, automatic, 4WD, power locks, windows, doors, & mirrors, A/C, cloth interior, bed tarp & liner, 265/70R17 tires, 293,211 miles

2000 Chevrolet, 3/4 ton, reg. cab, 6L gas, automatic, 4WD, 136,000 miles

1996 Chevrolet K20, 3/4 ton, ext. cab, 350 V8, automatic, short box, shows 141,000 miles, New tires & shocks

1996 Chevrolet 3500, 6.0 liter turbo diesel, 5 spd., 11′ flatbed, 5th wheel & receiver hitches, running boards, 225/70R19.5 dual tires, shows 138,356 miles, 100 miles since rebuild

1996 Ford F150, ext. cab, V8, automatic, 4WD, power windows & locks, cruise, rear air bags

1995 Ford F250, reg. cab, 8′ bed, 351 gas, 5 spd. manual, 4WD, A/C, tilt, cruise, AM/FM, 2″ receiver hitch, 165,000 miles

1994 Ford, reg. cab, long box, 302 V8, 2WD, 177,152 miles

1994 Ford F350 XLT, reg. cab, long box, 7.3L diesel, automatic, 4WD, 5th wheel hitch, 224,000 miles

1994 Chevrolet 2500 Cheyenne, 6.5L turbo diesel, 5 spd. manual, 4WD, shows 159,499 miles

1990 GMC Sierra, 1/2 ton, reg. cab, long box, 4.3L V6, 2WD, 177,650 miles

1987 Ford  F150, reg. cab, 8′ box, 300 inline 6 cyl., automatic, 4WD, manual locking hubs, A/C, AM/FM, power windows & locks, dual fuel tanks

1984 GMC Sierra Classic, 1/2 ton, V8, automatic, 4WD, power windows & locks, cruise, front tow hitch, shows 40,894 miles

 

HOPPER BOTTOM TRAILERS

2012 Merritt aluminum hopper bottom, 38’x96″x66″, ag hopper, spring ride, set up with Rapat self-contained belted tender conveyor, Honda electric start, rear controls, electric roll tarp, double row lights, side hopper site glass, 11-24.5 tires, 295 hrs. on motor, less than 15,000 miles on trailer, farm use only

2011 Stoughton hopper bottom, 40’x96″x74″, roll tarp, ag hoppers, air ride, aluminum sub-frame, aluminum rims

2011 Wilson Pacesetter hopper bottom, 41’x96″x72″, ag hopper, air ride, roll tarp, front SS corners, all rear SS, 11R24.5 tires on aluminum rims

2009 Timpte Super Hopper hopper bottom, 40×96″x72″, ag hopper, air ride, roll tarp, front & rear SS corners, front & rear catwalks & ladders, (2) rows lights, 11-24.5 tires on steel rims, 2 yr. old roll tarp

2007 Wilson DWH500 Pacesetter hopper bottom, 48’x96”x72”, air ride, air gauge, manual dump, spread axle, aluminum sub-frame, (3) ag hoppers, Shur-Co 4500 Series electric tarp and traps w/remote, SS front corners, full SS rear, electric rear dump valve, (2) rows lights, front & rear ladders & catwalks, 11R24.5 tires on aluminum rims

2006 Timpte hopper bottom, 40′, ag hopper, spring ride

2003 Timpte hopper bottom, 40′x96”x60”, ag hopper, spring susp., electric roll tarp, 24.5 tires on steel rims

2003 Timpte hopper bottom, 46’6”x102”x78”, air ride, air gauge, manual dump, spread axle, roll tarp, 11R24.5 tires on aluminum, New slope sheet on rear hopper, 2-spd. traps, (2) rows lights, front & rear ladder & catwalk

1999 Wilson DWH500 Pacesetter tri-axle hopper bottom, 50’x102”x84”, aluminum sub-frame, (3) hoppers, 2 spd. traps, air ride, air gauge, dump, electric tarp w/remote, tarp saver, SS front corners, front & rear ladder & catwalk, 11R22.5 tires on aluminum rims

1999 Timpte aluminum hopper bottom, 40’x96″x66″, air ride, roll tarp

1999 Fab-Tech single axle steel hopper bottom, 20′, spring susp., New roll tarp, 11R22.5 tires, 70%, on steel rims, recent paint

1998 Timpte tandem axle hopper bottom, 42’x96″x66″, spring ride, Shur-Co electric tarp & electric openers, 22.5 tires on aluminum wheels

1995 Wilson Pacesetter hopper bottom, 45’x102″x78″, New electric roll tarp w/wireless remote

1995 Timpte hopper bottom, 42’x66″, spring ride, electric tarp & traps, 11R24.5 tires, aluminum outside & steel inside rims

1996 Midland GT2000 steel hopper bottom, 42’x96″x78″, ag hopper, spring susp., electric roll tarp, 11-22.5 tires on steel rims

1992 Timpte hopper bottom, 40’x96″x72″, std. hoppers, air ride, roll tarp, 2 spd. traps, 11R24.5 tires on steel rims

1989 Cornhusker 800 tandem axle convertible hopper bottom, 46’x96″x88″, spring susp., triple hopper, New Shurco elec. hopper openers, roll tarp, smooth sides, 19″ hopper clearance, virgin 11R24.5 tires on (4) aluminum rims

1987 Timpte hopper bottom, 42′, non-ag hopper, spring susp., sunflower hopper ext., roll tarp, 11R24.5 tires

1983 Timpte hopper bottom, 42’x96″x72″, spring susp., roll tarp, 11-24.5 tires on steel rims

1983 Chamberlain tandem axle hopper bottom, 42’x96”x64”, ag hoppers, New electric roll tarp, 11R24.5 tires, New brakes fall of 2016

1983 Chamberlain tandem axle hopper bottom, 42′, spring susp. w/mini air ride, electric roll tarp, 2 spd. traps, 11R22.5 tires on steel rims

1978 Chamberlain tandem axle hopper bottom, 40’x96″x66″, spring susp., roll tarp, New front hopper & landing gear, 11R24.5 tires on steel rims

1974 Fruehauf hopper bottom, 40′, spring ride, tarp, 22.5 tires

 

LOWBOY & IMPLEMENT TRAILERS

2007 Kaufman tri-axle lowboy, 35 ton w/beavertail & ramps

1989 Load King tandem axle lowboy trailer, 42′, self-contained, spring susp., Honda electric start motor, swing out ext., 22′ belly, 11R22.5 low pro tires

1979 Transcraft tandem axle lowboy, 44’x8′, air ride, air ride, 23-1/2′ center well, 8′ rear deck, 8-1/2′ front deck, rear pintle hitch, 12″ flip-up outriggers, 11R17.5HC tires on Dayton rims

1974 Hyster C25TA tandem lowboy, 25′ deck, 8:25R15 TR matching tires

1999 Trailtech tandem axle combine trailer, 28′, slide-outs

1997 Bison tri-axle combine trailer, 53′, slide-outs

1993 Shop-built tri-axle combine trailer, 12′ fixed, pintle hitch

Muvall machinery trailer w/hyd. tail

1986 Shop-built combine/sprayer semi trailer w/ramps

 

HEADER TRAILERS

CHC 250 header trailer, 25′, 4-wheel, telescoping hitch, S/ND51190286

Easy Trail 680 header trailer, 30′, 4-wheel, telescoping hitch, 9:00-10F1 10-ply tires, S/N680E103109

Elmers single pole header trailer, 30′, corn head/all crop multi-fit brackets

Elmers single pole header trailer, 30′, flex pipe

(3) FW Mfg header trailers, 6-wheel, 42′, fenders, lights, torsion susp., single axle brakes, 7.5-16 tires, New

(3) FW Mfg header trailers, 6-wheel, 37′, fenders, lights, torsion susp., single axle brakes, 7.5-16 tires, New

(3) FW Mfg header trailers, 6-wheel, 42′, 7.5-16 tires, New

(3) FW Mfg header trailers, 6-wheel, 37′, 7.5-16 tires, New

(2) FW Mfg header trailers, 6-wheel, 46′, fenders, lights, torsion susp., single axle brakes, 7.5-16 tires, New

(2) FW Mfg header trailers, 6-wheel, 46′, 7.5-16 tires, New

(3) Industrias America 840 tandem axle header trailers, 40’, 6-wheel, New

(3) Industrias America 440 tandem axle header trailers, 40’, 6-wheel, New

(2) Industrias America 835 tandem axle header trailers, 35’, 6-wheel, New

(3) Industrias America 836 tandem axle header trailers, 36’, 6-wheel, torsion susp., lights, single axle brakes, New

(3) Industrias America 435 tandem axle header trailers, 35’, 6-wheel, New

Maurer M38 tandem axle header trailer, 38′, 6-wheel, brakes, lights, fenders

Industrias America 430 single axle header trailer, 30’, 4-wheel, New

Johnson single pole header trailer, 30′

Klugman header trailer, 4-wheel, 30′

Klugman header trailer, 25′, 2-wheel

Rite-Way HS3500 header trailer, 2-wheel, S/N06-35094

Shop-built header trailer, 30′

Shop-built single pole header trailer, 25′

SSR Pump single pole header trailer, 30′, flex pipe w/brackets made to fit John Deere all crop head

UFT header trailer, 30′, 4-wheel

Unverferth RoadRunner tandem axle header trailer, 38′, lights, susp.

1993 V Trailer Mfg header trailer, approx. 26′, 5,000 lbs. cap.

Wemco tandem axle header trailer, 32′, 6-wheel

Wemco tandem axle header trailer, 36′, lights

Wemco header trailer, 36′, 6-wheel

Header trailer, 25′, 4-wheel, Case running gear, adj. brackets

(4) Header trailers, 30′

 

FLATBED & UTILITY TRAILERS

2013 ABU tri-axle gooseneck flatbed trailer, 27’x102″, 5′ beavertail, flip-up ramps, pop-up rear center section, wood deck, front storage box, (2) 12,000 lb. jacks, 7,000 lb. axles, 235/80R16 tires on 8-bolt hubs

2012 Loadmax tandem axle gooseneck trailer 30’x102″, spring susp., wood deck, (3) ramps, New brakes, New 235/85R16 tires 

2010 PJ gooseneck trailer, 32′, beavertail, folding ramps, tandem duals

2008 DMS tandem axle gooseneck trailer, 32′, 4′ beavertail, ramps, steel bed, B&W gooseneck hitch and semi tractor hitch, 12,000 lb. axles, 235/85R16 duals

1999 Prairie tandem axle gooseneck flatbed trailer, 29’x102″, 5′ beavertail, ramps, 10,000 lb. axles, dual wheels

1999 Ly-Mar tandem axle trailer, 27′ deck, 81″ width, drive up ramps, 7,000 lb. axles, 7.50-16 tires

1990 Utility steel flatbed, 48’x96″, tandem axle slider, spring susp., wood deck, 11.24.5 tires on steel rims

1970 Hyster C25TA flatbed trailer, 33’4″ overall length, 17×8′ wood deck, dovetail, chain compartment, tie down rings, 8.25-15TP tires, no landing gear

Road Boss tri-axle trailer, 40’x8’6″, beavertail, lift-up deck, 10,000 lb. axles, spare tire, 215/75R17.5 tires

1997 JLB tandem axle bumper hitch car trailer, 8×18′, rear ramp, 5,000 lb. axles

1998 tandem axle trailer, 16’, removal sides & ramps, spare tire

2015 Metz Welding tandem axle utility trailer, 14’x75″, bi-fold ramp, LED lights

2001 Towmaster deckover trailer, 22′, air brakes, pintle hitch

Tandem axle gooseneck trailer, 32’, folding ramps

Tandem axle gooseneck trailer, 22′, 6′ beavertail, (2) ramps, front storage, wood deck, 235/80R16 dual tires

Steel flatbed trailer, 14′

Shop-built tandem axle bumper hitch flatbed trailer, 20′, New wood deck, MN farm use, No Title, Bill of Sale only, check local DMV laws before purchase

Shop-built single axle pickup box trailer

(2) small utility trailers

 

STEP DECK TRAILERS

2000 Lode King tandem axle aluminum/steel combo step deck, 53’x102″, will convert to spread, air susp., (4) tool boxes, sliding winches, 255/75R22.5 tires on aluminum rims

1998 TransCanada step deck, 48’x96″, aluminum over steel, 10′ spread axle, 11″ top deck, 255/70R22.5 tires on aluminum wheels

 (2) 1997 Fruehauf step deck trailers, 48′, air ride

1989 Lufkin step deck, 48’x102″, spread axle, air susp., sliding winches, 255/70R22.5 tires on steel rims

1988 Trail King step deck, 48’x102″, spread axle, air susp., sliding winches, 255/70R22.5 tires on steel rims

 

END DUMP & BELLY DUMP TRAILERS

2007 Loadline tandem axle end dump, 34′, spring susp., roll tarp, combo gate, liner, 425/65R22.5 Super Single tires on aluminum rims

1997 Frontier end dump trailer, 34’x96”x60”, spring susp., 22.5 tires

1982 East tandem axle aluminum end dump, 34′ tub, steel frame, spring susp, roll tarp, 11R24.5 tires on steel rims

1973 Fruehauf tri-axle aluminum end dump, 24′ tub, steel frame, spring susp., 10R22.5 tires

1964 Cook tri-axle belly dump, 40′, electric over air, 425/65R22.5 tires

 

LIVE BOTTOM TRAILERS

2008 Trail King live bottom, 41’x72″, 48″ belt, air ride, electric valve, 11R22.5 tires

1988 Red River live bottom, 38′, spring ride fixed tri-axle susp., 36″ belt, roll tarp, rear controls, hyd. rear door w/grain door

 

LIVESTOCK TRAILERS

2015 Kiefer aluminum gooseneck stock trailer, 24’, tandems

2005 Wilson R tandem axle aluminum stock trailer, 24′, (2) dividers w/slides

2004 Wilson PSDCL402 tri-axle livestock trailer, 53’x102″, fiberglass roof, spring susp., 275/80R22.5 tires

 

SPRAYER & DRY VAN TRAILERS

Horvick Duo-Lift tandem axle sprayer tender trailer, 1,235 gal. main tank, 300 gal. rear tank, 4’x5-1/2′ flat deck, 5-1/2 hp. 2″ Banjo pump, Firestone IF320/70R15 tires

1990 Monon van trailer, 48’x102″, spring susp., swing doors, tandem slider, (3) 1,650 gal. poly tanks, 1,000 gal. poly tank, (2) mix cones, Honda electric start, 2″ cast iron pump, F&S 2″ electric hose reel, lights, 295/75R22.5 tires on steel rims

1989 Fruehauf tandem axle dry van, 28′, 1,500 gal. poly tank, 1,500 gal. fiberglass tank, 5.5 hp. 2″ pump, (2) mix cones, hose reel

1990 Kentucky moving van, 48’x102″, air ride, (4) side doors, 255R22.5 tires

Wabash van trailer, 45′, tarp, open top

1983 dry van, 48′, swing doors, wood floor, sliding tandems, spring susp., 11-22.5 tires on steel rims

 

OTHER TRAILERS

2007 Great Dane 7811 reefer trailer, 53′, Thermo King unit, Yanmar engine, unknown hrs., air ride, sliding axles, aluminum floor, 295/75R22.5 tires on aluminum rims

2005 Aztec drop deck curtain trailer, 53′, steel frame, aluminum slide frame curtain, forward or reverse, wood deck, spread axle, air ride, low pro tires on steel rims

2011 HP Mfg single axle steel storage tank, 21,000 gal., spring susp., on 11R22.5 tires

Walker stainless steel equipment tanker trailer, 6,250 gal. cap.

1981 Westank 9600 gal. tri-axle tanker trailer

Trailmobile tandem axle aluminum tanker trailer, 6,200 gal.

Tandem axle 6,000 gal. tanker, steel trailer

 

SPRAYERS

Riverbend Industries sprayer, 100′, 1,200 gal. poly tank, adj. walking tandems, 3-way & 2-way nozzles, Raven SCS440 monitor

S&S pickup sprayer, 90′, 500 gal. poly tank, single nozzles, Honda 8 hp. belt drive pump, MicroTrak monitor, GPS receiver, flow track sprayer control, 2-boom set-up, bottom fill

Top Air 1600 sprayer, 90′ booms, 1,600 gal. poly tank, rinse tank, 5-way nozzles, 3-boom sections, 380/90R46 tires, S/NB22300103

Flexi-Coil 65 sprayer, 90’ booms, 1,000 gal. poly tank, mix cone, rinse tank, wind screen

Summers sprayer, 2 pt., 80′ manual fold boom, 500 gal. poly tank, New Hypro hyd. centrifugal pump, (2) sets nozzles, 3-section control

Pleasure Products pull-type sprayer, 40’ manual fold boom, 20” spacing, 200 gal. tank, Honda 5 hp. motor

Melroe 115 spra-coupe, cab, VW engine, 50′ booms, 150 gal. tank 

Summers pickup sprayer, 60′, 350 gal. poly tank

Pleasure Products/Marflex pickup sprayer, 60’ manual fold boom, 20” spacing, 3-section, 500 gal. tank, Honda 8 hp. motor, Hypro pump, electric over hyd. boom height adjustment

Sprayer, 3 pt., 15′ boom, Hypro 50 gal. PTO pump

Femco ATV sprayer, 10′ boom, hand wand

 

SELF-PROPELLED SPRAYER & SPREADER

1985 AgChem 1603 TerraGator, 3208 engine, 60′, 1,600 gal. SS tank, A/C, Raven monitor, 66×43.00-25 tires, 49,502 miles, S/N1610446

1995 Loral 3310 fertilizer spreader, ISM Cummins, Super 10 spd., 60′ booms, Dickey John rate monitor, light bar for guidance, 48×31-20 front tires, 66/43-25 rear tires, 5,395 hrs., shows 52,623 miles

 

CHEMICAL EQUIPMENT

1,000 gal. caddy, 5 hp. 2″ pump, 10′ PVC application boom, fiberglass tank, oversized implement tires

Liquid side dresser, 24×22″, (12) Clymer coulters, 44″ spacing, injection nozzles, on 3 pt. bar

Tow-between chemical cart, 500 gal. tank, Dempster ground drive pump

100 gal. poly chemical tank, w/hand pump

Poly mix cone

 

NH3 EQUIPMENT

John Deere 856 row crop NH3 side dresser, 24×20″, Raven cold flow, lift assist wheels

(2) 1995 Chem-Trol 1,450 gal. NH3 tanks on Ag Systems 4-wheel running gears, 14L-16.1 flotation tires, good ID plates

1980 1,000 gal. NH3 tank on 4-wheel running gear, 12.5-15 tires, good ID plate

1,000 gal. NH3 tank

John Blue 1,000 gal. NH3 tank on gear

MicroTrak NH3 cold flow system

(2) Continental NH3 controllers, hyd. shut-off, 5-way splitter & shut-off

John Blue nitrolator

 

HAY EQUIPMENT

Enorossi ERS20 hay rake, 20-wheel, front-folding, New

Enorossi ER14 hay rake, 14-wheel, front-folding, New, S/N108294

(2) 2011 Sitrex V-12 Magnum 12-wheel hay rakes, high capacity

Vicon hay rake, 6-wheel, hyd. lift, left hand delivery

Oliver side delivery rake

New Holland 1475 haybine, 16′

2002 New Holland 1431 discbine, 12′, shock hubs, drawbar hitch

Hay crimper for swather

1983 John Deere 1424 mower conditioner, 14’, hydra swing, rubber rollers, 540 PTO, 9.5-14 tires, S/N646447

2008 New Holland BR7040 round baler, net & twine

2005 New Holland BB940 medium square baler, 3’x3′ bale, auto lube, last bale eject, preservative applicator, tandem axle, 1000 PTO, 42,000 bales, 500 bales since serviced by Titan in 2016 

(2) Case-IH 8480 round balers, 3 yr. old belts, S/NCFH0114038, S/NCFH0052918

Case-IH 8460 round baler, twine tie, 540 PTO

2006 John Deere 567 baler, MegaWide pickup, S/NE00567X326007

Gehl 185 large round baler, twine tie, 540 PTO

Hesston 565A round baler

John Deere E0024 small baler, 540 PTO, newer needles

Industrias America 625 bale wagon, dolly front, New

Kingsman stack mover, 25’, walking tandems

Shop-built hay wagon, 28′, wood deck, 4-wheel running gear

Donahue, 32’, double round pipe, no wood

Bale wagon, 12′, 4-wheel steering axle

Bale fork, 3 prong

Bale mover, 3 pt.

Farmhand 8-bale accumulator, hyd. rear caster wheels

 

FORAGE EQUIPMENT

1995 John Deere 6810 self-propelled forage  harvester, 2WD, CAH, 48 knife drum, auto sharpener, auto lube, high arch spout, kernel processor, all wear liners replaced, w/Kemper 6-row folding corn head & John Deere 630 pickup head, 24.5-32 front tires, 16/70R20 rears, 2,532 cutter hrs., S/NZ06810X501478

Haybuster tub grinder, side conveyor, 1000 PTO

Artsway 425A grinder, electric scale

Artsway 425A grinder mixer

New Holland 352 grinder mixer

Roller mill w/electric motor, 3 phase

New Holland forage harvester w/3-row head

 

LITTER/LIME & MANURE SPREADER

2012 BBI litter & lime spreader, 24′ box, 32″ HD chain, hyd. chain & spinners, 1050/50R32 tires

1994 IHC 8200 twin screw, N14 Cummins, 9 spd., Knight 1160 manure spreader, horizontal beaters, bed chain replaced 2 yrs. ago

 

LIVESTOCK EQUIPMENT

For-Most tub & alley, 18’

For-Most 450 portable squeeze chute

(120) Continuous fence panels, 20′, 6-bar w/clips & connectors, New, sold price per panel, w/clips & connectors

Portable corral panels, interlocking, New, sold price per panel: (40) panels, 20′; (40) 14’; (60) 12’; (40) 10’; (40) 8’  

(11) 16′ wire hog panels, asst. sizes

Asst. of livestock gates

(3) portable creep feeders

 

GRAIN CLEANERS, GRAIN VAC, & DRYER

(2) Hi Cap double screen grain cleaners w/augers

Hi Cap rotary grain cleaner, corn screen, no auger, 220v, 1 phase

Kwik Kleen grain cleaner

Sioux grain cleaner

Sioux rotary grain cleaner, fill auger, asst. screens, 220v, 1 phase

Snowco grain cleaner

Kwik Kleen 772 cleaner, 7 tube, cleanup kit, 1 phase, set corn screens, S/N1357

Brandt 4500EX grain vac, hyd. fold auger, 1000 PTO

Handlair 2050 grain vac, 5″, cleanup kit

Walinga 610 grain vac, hyd. fold, (2) hoses & ends, small 1000 PTO, pump reconditioned approx. 20,000 bu. ago, S/NT610STD96026743

Farm Fan ABQ grain dryer, 120 bu., 1 phase, S/N8-8152

Super B AS12 grain dryer, 230v, 1 phase, 10 hp. blower, 3 hp. top auger, 2 hp. bottom auger, shows 7,398 hrs.

 

GRAIN STORAGE RINGS

CMC temporary storage ring, 105′ dia., 91,000 bu., New tarp, approx. 3 sections are damaged

Meridian storage ring, 70′, (2) fan transitions, approx. 20,000 bu.

Meridian storage ring, 70′, 12″ aeration tubes, tarp

 

AUGERS

Wheatheart SA1371 Flex low profile flex swing hopper auger, hyd. hopper lift, hyd. hopper mover, hyd. outriggers, 540 PTO, New

2011 Farm King auger, 112’x12″, mechanical drive swing hopper, hyd. wheels, hyd. lift

Westfield auger, 114’x13″, mechanical drive swing hopper, 540 PTO

Westfield auger, 111’x13″, mechanical drive swing hopper, electric hopper walker, 540 PTO

Feterl auger, 100’x12″, swing hopper, 540 PTO

Feterl auger, 100’x10″, mechanical swing hopper, hyd. winch, 540 PTO

Westfield 130-71 auger, 71’x13”, mechanical swing hopper, S/N203218

2012 Westfield flex auger, 91’x13″, S/N223951

Westfield auger, 81’x13″, swing hopper

Feterl auger, 72’x12″, 540 PTO

Westfield auger, 71’x8”, electric drive less motor, S/N172305

Westfield MK130-71 auger, 71’x13″, mechanical swing low pro hopper

Westfield auger, 71’x13″, hopper walker, reverser, used very little

(3) Wheatheart GHR 10-71 galvanized loadout augers, 71’x10″, electric motor mounts less motor, New

(2) Wheatheart GHR 10-61 galvanized loadout augers, 61’x10″, electric motor mounts less motor, New

Wheatheart GHR 10-61 galvanized loadout auger, 61’x10″, 15 hp., 3 phase, electric motor, New

Wheatheart GHR 13-41 galvanized loadout auger, 41’x13″, electric motor mounts less motor, New

Wheatheart BH10-41 loadout auger, 41’x10″, no motor, on transport, New

2011 Westfield WR80-61 auger, electric motor removed, used 2 seasons

2009 Westfield WR80-41 auger, 7.5 hp., 3 phase

2007 Westfield WR100-71 auger, 540 PTO, hyd. winch

2007 Westfield MK100-71 auger, low pro swing hopper, hyd. lift, 540 PTO

2007 Sheyenne Westgo GS20 auger, 51’x10″, 10 hp., 3 phase

1987 Alloway Westgo auger, 61’x10″, hyd. swing hopper

Westfield TR100-61 auger, hyd. swing, hyd. up/down, bottom corn screen w/vibrator & electric suction fan, 540 PTO

Westfield TR100-51 auger, hyd. swing hopper, hyd. up/down, 540 PTO, recent plastic flighting

Westfield auger, 61’x10″, mechanical swing hopper, hyd. up/down

Westfield auger, 61’x10″, mechanical swing hopper, 540 PTO, hyd. lift, auger reverser

Westfield auger, 60’x8”, PTO

Mayrath auger, 50’x8″, 540 PTO

Batco 1545 low pro truck unloader, 45’x15″, 10 hp., 1 phase, S/N15147

Westfield auger, 46’x8″, 5 hp., 3 phase

Wheatheart R8-46 loadout auger, 46’x8″, gas motor mounts less motor, hyd. mover kit, hyd. winch, New

Westfield auger, 46’x8”, 10 hp., 1 phase, S/N209283

Farm King 841 loadout auger, 41’x8″, 7-1/2 hp., 1 phase, on transport

Sheyenne Westgo GS20 loadout auger, 30’x10″, 10 hp., 1 phase electric, on transport, S/N32424

Westfield 80-36 loadout auger, 36’x8″, 7-1/2 hp., 1 phase, on transport

Westfield 60-51 auger, 7-1/2 hp. electric motor, swivel arc axle

Westfield auger, 35’x8″, 5 hp., 3 phase

Westfield auger, 31’x10”

Westfield auger, 31’x8″

Westfield auger, 26’x8″, electric motor

Westfield utility auger, 21’x10″, 5 hp., 1 phase

Westfield utility auger, 15’x8″, 2 hp., 3 phase

(3) Westgo drill fill augers

Westfield drill fill auger, brush auger, hyd. drive

Westfield endgate drill fill auger

Westfield drill fill auger

Westfield endgate auger

Drill fill auger, 17’x8″

Haul All drill fill, 20’, twin compartment, hyd. augers, steel covers

Westgo 8″ takeout auger, brush flighting

Wheatheart hyd. drag auger, Honda 13 hp. motor & pump, used in 18′ bin

Handifill hopper w/auger

Hutchinson takeout and power sweep for 48′ bin

 

SEED TENDER & CONVEYORS

2013 Unverferth 2750 SeedRunner tandem axle, belt conveyor, hyd. drive, roll tarp, Honda GX390 motor w/electric start, electric brakes, S/ND58480202

Batco PS2500 drive over belt conveyor, 7-1/2 hp., 1 phase, hyd. lift

Batco 1314 low profile transfer conveyor, 5 hp., 220v electric motor

Brandt 1515LP jump conveyor, hyd. drive, New belt and rollers 2 years ago

Convey-All 1035 conveyor, 10 hp. electric motor

Rice Lake fabricating conveyor, 45′, 24″ belt, hyd. drive

2016 Westfield 1335 conveyor, no fertilizer, S/N277945

Roach hyd. conveyor, 40’, 48” rubber belt

 

AERATION & BIN EQUIPMENT

AES phase converter, 100 hp.

Several New Grain Guard low speed centrifugal fans, 10-20 hp., 1 & 3 phase

Several New Grain Guard high speed centrifugal fans, 3 hp. & 10 hp., 1 & 3 phase 

Several New Grain Guard inline galvanized centrifugal fans, 3, 5, & 7 hp., 1 & 3 phase

(13) New Grain Guard heaters, 9”x14”, natural gas/LP, 100,000 BTU

Asst. New Grain Guard heaters, natural gas/LP, 100,000 & 60,000 BTU

(2) Superior centrifugal fans, 10 hp., 1 phase, 230v, reconditioned

Superior centrifugal fan, 15 hp., 1 phase, 230v, reconditioned

(2) Superior centrifugal fans, 20 hp., 3 phase, 230v, reconditioned

(2) DMC centrifugal fans, 10 hp., 230v, 1 phase, 1750 rpm

Keho centrifugal fan, 7.5 hp., 230v, 3450 rpm

Sukup horizontal power head w/48’ power sweep, New

Sukup vertical power head, 8”x20’, New

Sudenga horizontal power head, 36’ power sweep, New

Sudenga vertical power head, 8” unload to 10”x16’, New

Asst. Sukup carry-in portable power sweeps, New

Sukup double hopper unload tubes, asst. sizes, New

Superior full floor aeration floors, for asst. bins, New

Pallets approx. 200 floor supports, 12-1/2” tall

Caldwell ILC28-1012 bin fan w/propane heater, 10 hp., 1 phase, 230v, 32″ w/24″ transition

Caldwell F18-312 bin fan, New in box

Caldwell F14-11 bin fan, New in box

(4) Caldwell F12-751 bin fans, 12″, 3/4 hp., 115/230v

(6) Caldwell bin fans, New in box

(5) Caldwell aeration fans, 12″

Bin fan, 14″, 1 hp.

Magnet friction heat bin fan, 30 hp., 3 phase electric

Spread-All E3 electric grain spreader

Bin spreader, 240v, 1 phase, approx. 3,000 bu./hr.

Wheatheart bin sweep, 7″ auger, hyd. pump, hoses & reservoir to mount on auger motor

Screw-in aerator

(4) aeration tubes & working fans

Aeration tubes, 12″

(12) 4’x12″ aeration tubes w/3-hole manifolds

 

SKID STEER LOADERS

2015 John Deere 320E skid steer loader, CAH, 2 spd., hyd. quick tach, aux. hyd., ISO joystick control, New 12-16.5 tires, 3,610 hrs., S/N1T0320EKPFJ284604

2013 Volvo MCT135 track skid steer loader, diesel, side door, aux. hyd., 621 hrs.

2009 Caterpillar 279C track skid steer loader, CAH, 2 spd., high flow XPS hyd., aux. hyd., rear weights, hyd. quick tach, suspension, self-leveling, 78” bucket, AMICS, 18” tracks, 5,600 hrs., S/N0279CCMBT00546

 

SKID STEER LOADER ATTACHMENTS

Attachments International grapple bucket, 6′, 8-1/2″ tine space, for skid steer loader

Bobcat 811 backhoe for skid steer loader

Bobcat steel over the tire tracks, off S250, used 1 time, stored inside

Brute Attachments rock bucket, 66″, 4″ tine space, New

Brute Attachments rock bucket, 75″, 4″ tine space, New

Brute Attachments rock bucket, 80″, 4″ tine space, New

Brute Attachments rock bucket, 84″, 4″ tine space, New

Brute Attachments skeleton grapple, 66″, 4″ tine space, New

Brute Attachments skeleton grapple, 75″, 4″ tine space, New

Brute Attachments skeleton grapple, 80″, 4″ tine space, New

Brute Attachments skeleton grapple, 84″, 4″ tine space, New

Brute Attachments root grapple, 70″, 8″ tine space, New

Brute Attachments root grapple, 80″, 8″ tine space, New

Brute Attachments tine grapple, 74″, 10″ tine space, New

Brute Attachments tine grapple, 82″, 10″ tine space, New

(2) Brute Attachments 2″ receiver hitches, New

(4) Brute Attachments universal quick attach plates, New

(2) Brute Attachments pallet fork ext., New

Hawz Attachments rock bucket, 68″, 3″ tine spacing, New

Hawz Attachments rock bucket, 74″, 3″ tine spacing, New

Hawz Attachments rock bucket, 78″, 3″ tine spacing, New

Hawz Attachments rock bucket, 84″, 3″ tine spacing, New

Hawz Attachments skeleton grapple, 68″, 3″ tine space, New

Hawz Attachments skeleton grapple, 74″, 3″ tine space, New

Hawz Attachments skeleton grapple, 78″, 3″ tine space, New

Hawz Attachments skeleton grapple, 84″, 3″ tine space, New

Hawz Attachments root grapple, 74″, 6-1/2″ tine space, New

Hawz Attachments root grapple, 82″, 6-1/2″ tine space, New

Hawz Attachments manure grapple, 74″, 8″ tine space, New

Hawz Attachments manure grapple, 82″, 8″ tine space, New

(2) Hawz Attachments tree/post pullers, rated up to 8″ trees, New

(2) Hawz Attachments brush mowers, 72″, rated up to 3″ trees, New

JRB pallet forks, 96″, 72″ tines, 17,200 lb. cap., New

JRB mover, 3 pt., New

Lowe 1650 hyd. auger, 12″ & 18″ bits, skid steer loader quick tach, New

(4) Maxam 12-16.5 skid steer loader tires, 12-ply, New

Redline hyd. adjust pallet forks, universal skid steer mounts

(2) Redline quick tach plates for skid steer loader, New

(2) Redline receiver plates, skid steer loader attach, New

Redline walk-through pallet forks, 60″, 5,500 lb., skid steer loader attach, New

Redline walk-through pallet forks, 48″, 5,500 lb., skid steer loader attach, New

Redline standard pallet forks, 48″, 4,000 lb., skid steer loader attach, New

Redline tree & post puller, skid steer loader attach, New

Redline double-tine bale spear, skid steer loader attach, New

Redline rock bucket, 72″, for skid steer loader, New

Redline dirt bucket, 72″, for skid steer loader, New

Redline tall brick guard pallet forks, 48″, 5,500 lb., for skid steer loader, New

Redline rock bucket grapple, 84″, for skid steer loader, New

Stout XHD 84-6 brush grapple, skid steer loader quick tach, New

Stout HD72-3 rock bucket/brush grapple combo, open end, skid steer loader quick tach, New

Stout 72-8 brush grapple, skid steer loader quick tach, New

Stout walk-through pallet forks, 48″, skid steer loader quick tach, New

Bucket, 84″, w/hay grapple, New

Regular pallet forks, 48″, skid steer loader quick tach, New

Grapple, 72″ with Bobcat brackets

4-in-1 skid steer loader bucket

Pallet forks, 60″

Pallet forks, 72″

Skid steer loader general purpose bucket, 88″ wide

Skid steer loader general purpose bucket, 55″ wide

Skid steer loader pallet forks, 45″Wx48″L

Weld-on grapple for skid steer loader bucket

Brush cut mower, 72″, low flow skid steer loader mount

(2) fork ext., New

(3) TMG hyd. skid steer loader blades, 94”, hyd. angle, spring trip, bolt-on cutting edge, New

(3) Industrias American tree & post pullers, skid steer loader quick attach, New

Loegering steel over the tire skid steer loader tracks, 25 links, parts #800-373-5441

Pair rubber skid steer loader tracks

TMG trencher, 7”x35” trench, 12-24 gpm required, New universal skid steer loader mounts, flat-faced hyd. couplers, New

TMG 4-in-1 skid steer loader bucket, 84”, hyd. cylinders, universal skid steer loader mounts, New

TMG sweeper, 72”, hyd. drive, New, for skid steer loader

 

EXCAVATORS & ATTACHMENTS

2005 Link-Belt 130LX excavator, EROPS, A/C, heat, AM/FM, Isuzu BB4B6IT 4 cyl. diesel, hydrostatic, front lights, wipers, standard boom, 8’3″ stick, C&P 120 5-tooth 36″ bucket w/thumb, aux. hyd., 24″ steel triple grouser tracks, 7-bottom rollers, 27,100 lbs. base weight, shows 3,013 hrs., service records available, S/NK1J59775

1999 Caterpillar 320BL excavator, cab w/heat, 44″ bucket, thumb brackets, 27″ pads, 10,539 hrs., S/N 6CR03537

1985 John Deere 690C excavator

Ditching bucket, 65″, 2-1/2″x16″ pins, used on Case excavator

“V” excavator trenching bucket, 3.25″x19.5′ pins, 23″ wide at bottom

1969 Case W-9-9B loader, hyd. clam bucket, S/N980046

 

DITCHERS

Eagle 4A rotary ditcher, hyd. deflector, 540/small & large 1000 PTO

Sand Iron & Steel rotary ditcher

 

SCRAPERS

Garfield GDS12 box scraper, 12′, hyd. lift, complete, New, 2030101300

Letourneau L-S scraper, 11 yd., newly converted with push-off

Letourneau L-P scraper, 15 yd., newly converted with push-off

Letourneau push-off scraper, 10 yd., 60% tires

Dump scraper, 4 yd.

Wemco pull-type scraper, 48″, for ATV or lawn tractor, New

Ashland scraper, 4 yd., hyd. dump

Midland Mfg M86 hyd. scraper, direct mount, 6’x6’ tub, (4) rear tires

 

ROAD GRADERS & BLADES

1964 Allis Chalmers D road grader, gas, 10′ moldboard w/2″ ext., rebuilt engine & transmission, parts receipts -type township grader, steel wheels

Galion T600B motor grader, 671 diesel, 14’ blade, S/NGC702161

Industrias America 160R pull-type grader, 16’, hyd. tilt & angle, New

Industrias America 120R pull-type grader, 12’, hyd. tilt & angle, New

IHC blade, 6′, 16 position, 3 pt.

John Deere swivel blade, 8′, 3 pt.

Wemco box blade, 14′, New

(3) Industrias America box blades, 12’, New

(3) Industrias America box blades, 10’, New

Industrias America heavy duty box blade, 12’, hyd. tilt, New

(2) Industrias America box blades, 8’, New

(2) Industrias America box blades, 7’, New

Blade, 8-way, 16′, weight box, black, New

Blade, 8-way, 14′, weight box, black, New

Box blade, 72″, w/leveling wheel

 

MOWERS

John Deere 2018 rotary mower, 20′, hyd. fold, safety chains, S/NW02018F005706

Woods 3180 Series III mower, 15′, hyd. fold, safety chains, foam aircraft tires, 1000 PTO, S/N1015252

Woods 3180 batwing mower, 15′, 3-section, small 1000 PTO, S/N24503

2011 Woods BW1800 batwing mower, 15′, 1000 PTO, gearbox 3 yrs. old

2010 Bush Hog 2710 Legend mower, 10′, right wing lift, aircraft tires

Woods HD210R-4 ditch bank mower, 10′, PTO, hyd. lift, S/N2209

Woods 315 batwing mower, 10′, single wing, 540 PTO

Woods batwing mower, 10′, implement tires

Bush Hog finishing mower, 60″, 3 pt.

Huang Hai belly-mount mower, 60″, (2) blades

Kuhns GMD550 disc mower, 6′, 3 pt., 540 PTO

Bush Hog 8072R-3 brush mower, 3 pt., 540 PTO

John Deere 350 mounted sickle mower

IHC 1100 sickle mower, 9’

John Deere 450 pull-type sickle mower, hyd. lift, 540 PTO

Swisher pull-behind mower, 12.5 hp., 60″ cut

TMG flail mower, 70”, 3 pt., 540 PTO, New

Alamo 15-IV-E flex wing rotary mower, 15′, hyd. fold, 540 PTO

Woods offset ditch bank mower, 6’, 3 pt.

 

SNOWBLOWERS

Erskine snowblower, 3 pt., 2′ blade extension, 540 PTO

Feterl snowblower, 9′, 2-stage, dual auger, hyd. spout, 540 PTO

Lorenz snowblower, 9′, hyd. spout, double auger, 3 pt., 1000 PTO

Buhler snowblower, 74″, 2 stage, never used

 

OTHER EQUIPMENT

Miskin land leveler, 18′, 28′ long, 3 pt.

Richardton dump wagon, ext. for high lift, poly liner

Crown rockpicker, 54″, hyd.

Melroe 600 rockpicker

Lindsay rock nabber, 3 pt.

Berkeley B3JRBM irrigation pump, Perkins diesel, on trailer

Concord truck-mount soil sampler, electric over hyd., multiple tips included

Turf Til 5081-81-B rototiller, rear tine, chain drive

Woods rototiller, 5′, 3 pt.

Header adapter, John Deere to Case-IH

Header adapter, Case-IH to Caterpillar

(2) Wood chippers, 3 pt., New

(2) plate compactors, 21”x18”, 6-1/2 hp., New

TMG heavy duty rototiller, 80”, 3 pt., 540 PTO less shaft, 60-90 hp., New

Wheeled laser tower

Shop tool carrier, caster wheels, approx. 6’x4-1/2’

 

CONSTRUCTION ITEMS & GENERATORS

1996 Crafco EZ Pour crack sealer

Dry Air 2100-0400C diesel-fired glycol heater, 140,000 BTU, Cat 10kw diesel generator, 1,295 hrs., electric hose reel w/(6) 375′ hoses, 240 gal. fuel cap., approx. 48 hr. run time, mounted on 17′ steel single axle trailer, torsion susp., leveling jacks

2005 Terex AL4060D-4MH portable light plant, Kubota 3 cyl. diesel, 6kw 120/240 generator, 1500 watt per light, 10,000 hrs., S/NFIF-12351

Dayton 3W956 generator, 60kw, 3 phase, 54kw, 1 phase, on trailer

Generac 7550EXL generator

Generac gas generator, 5000 watt

(2) Generac generators, 4,000 watt

Hobart Champion welder/generator, 10,000 watt

Miller Legend welder/generator, gas, 120/240v, 42/21 amps, 5.5kw, S/NKB011421

Winpower generator, 6kw, PTO, on wheels

Winpower generator, 6.5kw, 23.8 amps, 540 PTO

(5) sets A1 scaffolding, braces & (2) sets of wheels

TMG backhoe, 3 pt., hyd. outriggers, New

Henderson salt spreader box, 54”x8’, Briggs 10.5 hp. motor

 

FORKLIFTS

IHC 5612 forklift, gas, 5 spd., 2 stage, 12′ lift, 48″ forks, 16.9-24 front tires, 7.50-16 rear tires, cyl. rebuilt 3 yrs. ago

Hyster H60 forklift, LP, 144″ lift, 6,000 lb. cap., pneumatic tires, shows 1,161 hrs.

Clark CY20B forklift, 2,000 lb. cap., side shift, forks, LP gas, pallet forks, S/NCY20B107588465

 

SWEEPERS

Advance Retriever 467800 walk-behind floor sweeper, 27″, S/N101-8949

Broce broom, open station w/canopy, Ford gas motor, 8′ broom, 3,309 hrs.

 

RECREATION

2013 Polaris Sportsman 850HO LE Stealth, on demand AWD, power steering, black, 8,963 hrs.

2012 Arctic Cat Prowler 700 HDX ATV, 2,250 miles

2006 Yamaha Rhino 660 ATV, 4WD, (2) bucket seats, folding wind screen, fabric roof & back, metal grill guard, dump box, receiver hitch, 244 hrs., 2,221 miles

(2) 2008 Yamaha Raptor 250 ATVs

1996 Polaris Trail Boss 4-wheel ATV, 2×4

2007 EZ Go Workhorse golf cart, gas, metal box, headlights, single bench, roof

2005 ClubCar golf cart, 48v electric motor, 1 yr. old battery, set up for golf

1996 EZ Go gas golf cart, roof, single bench

1996 Polaris Trail Boss ATV, 4-wheel, 2×4

1993 Cub Cart Carryall 1, bench, metal box

1985 Honda Goldwing Aspencade motorcycle, 1200cc, 50,000 miles, New carb kit, master brake cylinder, & tires, stored inside

1999 Shop-built dune buggy, 4-seat, VW engine & powertrain, roll cage, hyd. disc brakes, independent susp., turn signals, aux. lights, windshield, 35-12.5R15LT rear tires, 205/75R15 front tires, shows 4,971 miles, custom built single axle trailer, flip-up ramps, winch, lights, 225/75R15 tires,  dune buggy has ND off-road title

Yacht Club tandem axle pontoon trailer, 24′, electric winch

 

SUVS & CAR

2012 GMC Yukon Denali XL, all-wheel drive, white diamond tri-coat with cocoa/light cashmere leather interior, 6.2 litre, automatic 6 speed, class III hitch with 7 pink hook-up and built in tow trailer control, automatic climate control front and rear with heated and cooled seats, 4 captain’s chairs with 3rd row removable, heated steering wheel, sunroof, rear camera, power heated mirrors, automatic lift gate, adjustable pedals, full power seats, stationary running boards, second and third row fold down entertainment system with 4 cordless headphones and remote, Bose Center Point surround sound XM, FM, DVD, GPS navigation, full set of Weatherguard molded floor mats including rear, Bridgestone Dueler 8275/55R20 tires, near new, 175,716 miles, single owner

1997 GMC Yukon, 4 door, 5.7 liter, automatic, 4WD, A/C, cruise, cloth interior, 164,000 miles

1997 GMC Yukon, 4 door, 5.7 liter, automatic, 4WD, A/C, cruise, cloth interior, 164,000 miles

2007 Nissan Maxima SE, 3.5 liter, automatic, cloth interior, 165,000 miles

 

LAWN & GARDEN

Toro Groundmaster 322D lawn tractor, diesel, 72″ deck

Toro Groundmaster, 4 cyl. engine, hydrostatic, 72” deck, unknown hrs.

John Deere 7-Iron drive over mower deck, 72”, mid-mount PTO, fits 3000 Series, w/mounting hardware

Grasshopper 723 lawn tractor, Kohler 23 hp. air-cooled engine, 61″ deck, PowerFold electric deck lift, 670 hrs., S/N5619703

1999 Cub Cadet 3165 lawn tractor, 48″ deck

1986 Dixon ZTR lawn tractor, Briggs 12 hp. gas, 48″ deck, Power Flow dual rear bagger, S/N07108

1980 John Deere 317 lawn tractor, Kohler 17 hp., hydro, 2WD, John Deere 33 tiller, S/N162276

DR commercial brush trimmer, 17 hp. Kawasaki engine

John Deere 318 lawn tractor, 48″ mower deck, bagger system, shows 956 hrs. but broken meter, S/NM00318X321342

MTD LT lawn tractor, 12 hp., 38″ cut

John Deere 110 lawn tractor, 38″ deck, does not run

Deutz Allis 1914 lawn tractor, gas

John Deere mower deck, 60″, no gearbox, S/NM060HD

John Deere tilt dump grass collection system, fits 400/X Series lawn tractor, blower & tube, PTO, S/NM02681X507012

Craftsman walk-behind rear tine tiller, 5 hp., 17″

Hyd. sweeper, 48″, for lawn tractor

Push mower, 22″

Yard rake, 6-wheel

(3) garden hose reels

Yard Machine walk-behind rotary tiller

SHOP EQUIPMENT

Ranger RML750HD motorcycle/ATV platform lift, 52″x80″, air over hyd., 40″ max table height, 1,650 lb. cap., adj. motorcycle wheel chock, removable insert for wheel removal

Airco MSB Bumblebee 2 AC/DC 250 amp welder

Several lots pallet racking: teardrop-style, some New, uprights, beams & decks

Connecticut U-422 hand brake, 4′

Alkota 4211 hot water washer, stationary unit, LP, 5 hp., 230v

Dry Air HR6000 portable hose reel, electric wind/unwind, unknown length of hose, forklift pockets

Knaack toolbox

Reelcraft hose reel for oxyacetylene torch, no hose

Reelcraft hose reel for pressure washer w/hose

Shop-built roller stand, 10′

Shop-built pipe threader w/dies

Shopmaster cherry picker, 3 ton

(2) Heavy duty tire changers, 120v, 10”-22” outside clamping, New

(2) Heavy duty wheel balancers, 120v, 200 rpm, New

Hyd. shop press, 75 ton, air-operated w/gauge, adj. table heights, New

Floor scale, 10 ton, digital display, New

Heavy duty 2-post car hoist, 9,000 lb. cap., 3 hp. motor, New

(2) SS work benches, 72”, 15 drawers, wood top, upper cabinets, caster wheels, New

Multi-drawer tool cabinet, 80”, 12 drawers, (2) large doors, (2) small doors, New

Weatherguard 127 crossbox toolbox

Tripod halogen shop lights

(5) pipe wrenches

(2) Steel workbench, 10’, 20 drawers, 40” steel pegboard

Steel top for workbench, 102″x29″

Cherry picker, 2 ton

Cold water washer, Honda engine

Iron rack, 6′ long x 5′ tall, triangle shape

(2) Anvils

Oil storage tank, 110 gal.

Hanging garage heater, 220v

Hyd. bumper jack

2″ hose reel, hand crank

(2) shop tables, 31″x44″

(2) aluminum shop tables, 4’x4′

Metal shop bench, 2-1/2’x6′

(2) enclosed shop cabinets, 3’x7′

Power washer

Pallet sugarbeet hook lifter chain

A/C welder on cart w/leads

Tool rack

Stainless steel toolbox, with misc. tools

3-tank bulk oil stand, (2) 85 gal. & 1 (55) gal. fiberglass tanks w/valves on stand

Steel workbench, 2-1/2’x6′

Heavy duty air compressor, 4 hp., 40 gal.

Aluminum ext. ladder, 24′

Portable electric air compressor, 1 hp.

Pressure washer, B&S 5-1/2 hp. gas motor, 3 gpm, 1500 psi, New cart

(4) stackable bolt bins w/bolts

Beam scale on wheels

Horizontal band saw, 120v, 1 phase

 

TANKS

1,500 gal. poly tank

1,550 gal. poly tank

Pleasure Products 300 gal. tank w/stand

Green poly saddle tank

1,000 gal. fiberglass water tank, 2″ fill hose

150 gal. fuel tank, 12v pump

1,000 gal. fuel tank, Gasboy pump

(2) 1,000 gal. fuel tank, no pumps

1,000 gal. fuel tank, w/pump

(2) 500 gal. fuel tanks, no pumps

500 gal. tank, w/pump

100 gal. L-shape fuel tank, 12v pump

100 gal. fuel tank w/pump

80 gal. fuel tank, hand pump

(2) 100 gal. pickup fuel tanks, one w/pump

Agri-Products poly saddle tanks & mounts, approx. 270 gal. each

Demco saddle tanks, 200 gal. each

 

TRACKS & TIRES

(2) Camoplast 18″ tracks, off John Deere R Series, 80%

(2) 30″ Camoplast tracks, off 550 Quadtrac, 70% tread, approx. 1,500 hrs., rebuilt guide blocks

(3) 30” tracks for Case-IH STX Quad

(5) American Farmer 7.40-20 single rib tires

(2) Firestone 18.4-38 tires, 6-ply, 40%

(2) Goodyear DynaTorque 20.8-38 radials on John Deere 10-bolt hub dual rims, 30% tread

(2) Goodyear 18.4-34 tires, 6-ply w/tubes, 75%

John Deere factory duals & tires, for 9770

(2) 14.9-24 tires, 50% tread

New spare tire, 12.5L-15SL

(2) 215/75R14 tires & rims

(2) 12.50/16.5 tires

(4) 155/80-13 tires

Set (4) 320/90R46 tires & rims, 85%, off 4730 sprayer

(4) 14L-16.1 tires on 6-bolt rims, off NH3 trailer

7.50×20 3-rib tire on 6-hole rim

(2) 11-24 single rib tires on John Deere rims

(2) 18.4-34 tires on double bevel rims

Asst. tires & rims

18.4R42 duals

(4) 480/80R46 tires, 35%

(6) 7.50-16 single rib tires, on John Deere 6-hole rims

Set 14.9R46 duals, and hubs for John Deere 7810

(2) 7.50-20 guide tires on Case rims

(2) Dunlop 14/80R20 tires, one mounted on rim

(2) Goodyear 380/90R50 tires

(6) Titan 7.10-70R42 R1W tires

(4) 235/15 tires on 8-hole chrome rims

(2) 295/75R22.5 recaps

(2) 6×12 trailer tires on 4-bolt rims

(2) 16.5×6.5-8 trailer tires on 4-bolt rims

285/75R24.5 trailer tire

(3) 14/80R20 truck tires

(7) Goodyear 710/70R42 tires, approx. 50%Large assortment truck tires, assorted sizes, some RDA recaps

 

PARTS

Allied loader brackets, fit John Deere 4020

Alloway cultivator parts

(16) Amity beet lifter wheels, rebuild

AWS air bar, 40′, off John Deere 640FD head

Bish hopper extension for John Deere 00/10 Series combine

Case-IH quick hitch

Crary gearbox for air reel

DMI front disc gang, 17′

(8) DMI rear disc levelers

Pallet cultivator sweeps w/knock-ons for John Deere, approx. (108)

1955 Ford 292 V8 engine w/manual 3 spd. transmission

(4) IHC 100 lb. weights, & misc. IHC parts

John Deere 635F 60H chain drive, (2) sprockets & shaft

John Deere 60 Series combine original beater

(2) John Deere hyd. cylinders

(3) John Deere wheel weights, 450 lbs., off 9000 Series

(2) John Deere pickups w/orbit motors

John Deere power tailboard off 60 Series combine

John Deere ground drive liquid fertilizer pump

John Deere Pro Max 40 planter parts

(16) John Deere insecticide boxes off 7200 planter

John Deere 1.5 bushel seed boxes w/vacuum units, off 7200 planter

John Deere standard hopper extension for 00/10 Series combine

John Deere mulching attachment for Model 62 deck

(2) John Deere rims, 28×18, fit 600/65R28 tires

(36) John Deere disc scrapers for planter

Lankota stalk stompers, 8 row, off John Deere 608C  

(2) New Holland 8-hole hub dual adapters, part #87600865

Reece sliding 5th wheel hitch, 16,000 lb.

Reese 5th wheel hitch

(2) Summers touchdown wheels for sprayer

Unverferth step-up rims, 38″ casts, up to 46″, 12″ width

(2) Unverferth 29-1/2″ spacers, 10-bolt

Approx. 200′ of 5/8″ steel cable

Approx. 150′ of 7/8″ steel cable

Asst. row crop cultivator parts

(2) heavy duty rear hitches for chisel plows

Asst. lift guards

Misc. John Deere cab lights

Misc. sprayer tips

Front & rear axles, for 1955 Ford F100 pickup

New disc spindles

Box New headlights & cover, for Kenworth

Radar for John Deere tractor

Aluminum headache rack, aluminum toolbox & wide load sign

Aux. fuel tank, 30 gal., for John Deere tractor

Pallet Woods mower parts

Steel truck bed, 10’x7-1/2′ w/stakes and sides

Pallet WIC scalpers

Pallet asst. receiver hitches

Set (2) John Deere 12×46 10-bolt wheels

Pallet sprayer parts

Pallet cultivator discs

(3) aluminum headache racks

Aux. tractor heater

(4) aluminum rims, 16″, for GMC 1/2 ton pickup, 6-bolt, w/Goodyear tires

1,500 lb. axle w/springs & 4-bolt hubs

(2) 3 pt. auto guide quick hitches w/monitors

Aux. fuel tank, off 4640

Metal bat reel, 21′

Roll bar w/lights

Bin fan motor, 10-15 hp., 3 phase, 1750 rpm, New

Pickup belts for Case-IH

Louvered endgate w/lowered center, for pulling 5th wheel trailer, fits Ford pickup

Set pickup guards for 25′ swather

(37) chisel plow sweeps, 12″ w/NH3 injector brackets

Asst. John Deere combine parts

Asst. Case-IH combine parts

Finger reel, 30′, off John Deere 930 flex head

Set small wire concaves, fit 1688-2388

(12) hyd. cylinders, asst. sizes, New

(2) Freightliner FLD112 front axle springs

(3) air ride truck seats

Hyd. system for Case-IH Puma guidance

Dual spacers for 165 Puma

Set narrow wire concaves, for Case-IH 1460

Set slotted concaves, for Case-IH 1680

Pallet misc. harrow teeth, New

Pallet (80-85) used toolbar sweeps, 12-15″

Hyd. conversion auger lift

Pallet misc. sprayer parts

Pallet misc. tillage parts

Pallet misc. guidance parts

Front fuel tank for John Deere 4440

(90) paddle fingers, for John Deere 600 Series flex head

(52) gauge wheels, for John Deere 1895

(52) seed boots for John Deere 1895

End boom tips for RoGator 854, approx. 12′

Case-IH Magnum tractor weight bracket, with (16) weights

Case-IH Magnum tractor weight bracket, with (12) weights

(2) front tractor hub ext., 21″, 10-hole

Knapheide service body, 8′, open middle, side compartments, off Chevrolet 3/4 ton

120’ poly boom pipes w/5-way nozzle bodies, off John Deere 4920

Boomer canvas cab enclosure

MC35 Boomer canopy

(2) AFX rotors, used 1 season

Hyd. chaff spreader

Pallet of hoists

3162 transport kit

New auger for 2612 corn head

End shields for corn head

Pallet of New disc scrapers

Pallet New end dividers for 1020 head

Crate TM200 shanks

18.4-38 straddle dual wheel rim for John Deere 9600, rebuilt

Set John Deere 4020 fenders

(4) John Deere 4020 front weights w/brackets

Front axle w/spindles for 4020

Approx. (60) Salford disc hubs

Pair long dividers off John Deere 900 Series head, New

 

FARM SUPPORT & MISC. ITEMS

Crossbox toolbox

Delta aluminum diamond plate toolbox

Delta aluminum diamond plate toolbox w/95 gal. fuel service tank

2015 DuroMax 3″ cast iron water pump, 7 hp., S/NDJ170F

Homelite centrifugal water pump, 3″, 328 gpm, B&S gas motor

Mierson electric motor, 2.8 hp., 220v, w/air compressor, no tank

Pacer water pump, 2″, Briggs 3-1/2′ hp., 25′ suction hose, 300′ of discharge hose, S/NSE2PL

Banjo transfer pump, 2”, B&S 3-1/2 hp. gas motor

Rush sprinkler pump, 1-1/2″, 3 hp., 220v, on wheels

Shop-built water pump, hyd. drive, on transport

B&S 5 hp. gas motor

Baldor electric motor, 5 hp., 1 phase

Baldor electric motor, 15 hp., 3 phase

Weatherguard single lid crossbox toolbox

Husqvarna chainsaw, for parts

Transfer pump, 1-1/2″, gas motor

2-in-1 ratchet cargo bar, for pickup box

Tri-fold aluminum ATV ramps, 65″x48″ wide

Shallow well pump, 1/3 hp., 110v w/tank

(3) rolls misc. electric wire

Floating water pump, less motor

(2) heavy duty ext. cords, 3 phase

(6) blackbird boomer guns

110v electric fuel pump

Pallet chains & binders

(4) trailer house axles, & (8) tires & rims

(2) pallets steel fenceposts

Beet truck directional lights

(2) 220v ext. cords, 50′

Ramps for ATV

50′ approx. 2/4 gauge electric cord

(8) rolls smooth fencing wire

Pickup toolbox

Nylon rope, 20’x2-1/2″ w/clevis

Steel hyd. tank

LP tank for forklift

Aluminum ATV ramp, slides into 2″ receiver

(2) hopper totes, 10’x10′ & 6’x6′

Caliber snowmobile track guides w/radius for trailer

Carlzeiss engineers level, tripod & grade stick

(2) Chamberlain garage door openers

Meilink fireproof safe, 41″x27″x25″

St Croix corn furnace

Waltco tommy lift, electric/hyd. w/all hardware

York propane furnace, 100,000 BTU, recently removed because of new construction

Galvanized culvert, 20’x18″

(4) pieces metal shelving, 3’x7′

(9) halogen lights with outlets

Adj. basketball hoop and stand

(8) 10 gal. cream cans

(4) aluminum snowmobile hold-downs

Aluminum snowmobile ramp

Snowmobile dolly

Wrought iron decorative gates, 10’, New

(2) Peak ceiling double door storage building, 30’x65’x15’, commercial fabric, waterproof, UV & fire resistant, 12’x12’ drive-through doors at (2) ends, New

Peak-style storage shelter, 20’x30’x12’, roll-up door, galvanized tubes, commercial fabric, New

Peak-style storage shelter, 20’x30’x12’, roll-up door, galvanized tubes, commercial fabric, New

(2) Instant pop-up tents, 10’x20’, 600D PVC commercial fabric, waterproof, fire retardant, New

(2) Twin wall green houses, 8’x10’, New

(2) Marquee party tents, 16’x22’, powder coated frame, PVC fabric, (8) removable sidewalls, (7) windows, (1) zippered door, white, New

(2) Pagoda party tents, 20’x20’, comes with side walls, windows & zipper door, New

Drafting table, wood top, steel base, (2) drawers

Pallet misc. electrical wire

Fill-Rite fuel pump, 115v

Great Plains Ind. fuel pump, 115v

(3) Lincoln rechargeable grease guns

 

AGIRON WEST FARGO

701.237.9173

 

Equipment Check-in:

Monday, July 17 & Tuesday, July 18 please call our offices for details. Wednesday, July 19-Friday, July 21 9AM-5PM

Fairgrounds is open from 9AM-5PM July 17-21, 24, 25 for equipment viewing.

 

TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items. Statements made auction day take precedence over all advertising. $35 documentation fee applies to all titled vehicles. Titles will be mailed. ND Sales Tax laws apply. Canadian buyers need a bank letter of credit to facilitate border transfer.

Photo Gallery