Major equipment begins selling at 10:30 AM. Live online bidding available on major equipment. For information contact Clem, 218.766.5194 or Tadd Skaurud at Steffes Group, 701.237.9173 or 701.729.3644.

FARM RETIREMENT AUCTION

 

LOCATION: From North side of Twin Valley, 7-1/2 miles West on Co. Rd. 27, South side of Hwy. (3037 Co. Hwy. 27, Twin Valley, MN 56584)

 

AUCTIONEER’S NOTE: Major equipment begins selling at 10:30 AM. Live online bidding available on major equipment.

 

Items highlighted in yellow are additions or changes from the original posting

 

TRACTORS

2002 Case-IH STX450, Quadtrac, luxury cab, powershift, 4 hyd., power beyond, return flow, 1000 PTO, front & rear diff lock, John Deere ATU steering wheel, ITC receiver, clear view caps, 30″ tracks, 7,421 hrs., remfg. transmission installed in 2017, S/NJEE0099989

2005 Case-IH MX230, MFWD, deluxe cab, buddy seat, powershift, 5 hyd., return flow, 3 pt., quick hitch, (3) PTO’s, diff lock, front suitcase weights, 380/85R34 front duals, 380/90R50 rear duals, 3,772 hrs., S/NJAZ136810

1980 Massey Ferguson 4840, 4WD, CAH, 903 Cummins, 18 spd. partial powershift, 3 hyd., 20.8R38 duals, shows 1,446 hrs., New rods & main bearings at approx. 6,000 hrs., S/N9D002322

1977 Massey Ferguson 1135, CAH, 2WD, diesel, 8 spd. multi-power, 3 hyd., 3 pt., 540/1000 PTO, aux. fuel tank, 14.9R46 duals, 8,763 hrs., approx. 1,000 hrs. on rebuilt engine & multi-power, S/N9B73652

 

GPS EQUIPMENT

Trimble EZ-Pilot steering wheel, EZ-Guide 750 display, AG25 receiver. GNSS/OmniSTAR unlock

John Deere brown box w/processor, SF1 card

 

HARVEST EQUIPMENT

2008 Case-IH 7010, PRWD, Field Tracker, ext. wear rotor & cone, Pro 600 monitor, integrated auto steer less receiver & Nav controller, Y&M w/mapping, chopper, hopper ext., single pt. hookups, power mirrors, 900/60R32 front tires, 540/65R30 rear tires, 2,087 sep. hrs., 2,809 engine hrs., S/NHAJ202145

2016 Case-IH 3020 TerraFlex flex head, 35′, hyd. fore/aft, Crary air reel, AHH in rigid mode, Field Tracker sensors, single pt. hookups, S/NYDH220569

2009 Geringhoff RD800 Rota Disc chopping corn head, 8×22″, hyd. deck plates, Insight AHH, (4) stalk stompers, S/N918309822/B

Horst CHC 4-wheel header trailer, 30′

Shop-built 4-wheel header trailer, 35′

 

GRAIN CART

J&M 500-14 grain cart, 500 bu., 14″ corner auger, roll tarp, 24.5-32 tires, S/N1804

 

PLANTER & PRESS DRILLS

John Deere vacuum planter, 16×22″, HD spring down pressure, 3 bu. boxes, mechanical drive, Friesen front folding tool bar, hyd. markers, liquid fertilizer in-furrow, Lil’ Thumper ground drive pump

John Deere 9350 press drills, 20′, (2) 10′ sections, dry fertilizer, hyd. markers, yellow press wheels, No transport

 

TILLAGE EQUIPMENT

2009 Salford RTS 570 vertical tillage, 36′, 3-section, wave coulters, weight pkg., walking tandems, 3-bar harrow, rolling baskets, S/N097311

Flexi-Coil pull-type coil packer, 40′, 3-section fold, ext. hitch, tandems on main, S/NM046479

Wil-Rich field cultivator, 40′, 7″ space, 3-section fold, walking tandems across, 7-1/2″ sweeps, rear hitch & hyd., 3-bar harrow

Case-IH PTX300 chisel plow, 28′, 12″ space, 3-section fold, walking tandems, single pt. depth, 3-bar harrow, S/NCBJ0015093

Geisler chisel plow, 24′, 12″ space, tandems on main, singles on wings

John Deere 331 tandem disc, 30′, scrapers, tandems across

Alloway RTS soil conditioner, 29′, double rolling baskets

Glencoe Soil Saver disc chisel, 11′, 9 shank, front coulters

Alloway row crop cultivator, 12×22″, 3 pt.

 

SEMI TRACTOR & BOX TRUCKS

1996 Kenworth T800 tandem axle day cab, Cat 3406, Eaton 9 spd., engine brake, air ride, air slide 5th wheel, diff lock, cruise, single aluminum fuel tank, full poly fenders, 170″ WB, 11R22.5 tires on (6) aluminum rims, shows 522,671 miles

1987 Freightliner FLC tri-axle, 855 Cummins, Eaton 9 spd., diff lock, 20-1/2’x96″x62″ box, hoist, roll tarp, combo gate, air up/down pusher axle, 315/85R22.5 front tires on steel rims, 11R22.5 tires on steel rims, shows 525,878 miles

1975 IHC Loadstar 1800 twin screw, 478 V8 gas, 5&4 spd., 19’x66″ steel box, hoist, roll tarp, Saf-T-Pull, 10:00-20 tires, shows 92,665 miles

 

HOPPER BOTTOM & OTHER TRAILERS

2008 Wilson DWH-551 tandem axle hopper bottom, 40’x96″x68″, ag hopper, air ride, air scale, single row lights, electric roll tarp, sight glasses, 11R24.5 tires on aluminum rims

2003 Great Dane van trailer, 28′, spring ride, aluminum floor, roll door, (2) 2,100 gal. poly tanks, 30 gal. mix cone, 2″ transfer pump, rear pintle hitch, 275/80R22.5 tires

Donahue tandem axle implement trailer, single tube, needs new wood on deck

 

SPRAYERS

2000 Flexi-Coil 67XL pull-type sprayer, 90′ susp. boom, 20″ space, windscreens, 1,500 gal. poly tank, hyd. pump, 2-way nozzle bodies, rinse tank, foam markers, 3-section shut-off, Flexi-Coil auto rate controller, 14.9R46 tires, S/N097311

Marflex skid sprayer, 60′ susp. boom, 500 gal. tank, Honda gas motor w/pump

 

CHEMICAL/FERTLIZER/NH3 EQUIPMENT

Shop-built NH3 side dresser, 16×22″, 3 pt., rear hitch, hyd. nitrolator

Redball saddle tanks, 300 gal. each, mounts for Case-IH MFWD tractor

F&S 2″ hose reel, electric rewind, New

 

SEED TENDER & GRAIN HANDLING EQUIPMENT

Seed Shuttle SS290 dual compartment seed tender, 180 degree swing conveyor, Digi Star GT400 electronic scale, Honda GX160 electric start motor, remote control, tandem axle bumper hitch trailer, torsion susp., 2-5/16″ ball, S/N21270

Butler Kan-Sun 1028-215 continuous flow grain dryer, 10’ dia., 28’ tall, (2) 15 hp. fans, LP burner, 1 phase w/built-in phase converter, DMC Calc-U-Dri moisture manager, approx. 800 bu./hr. at 5 pts., reconditioned in 2013 by D&B Agri Systems

Sorenson Welding belt conveyor, approx. 35′, 10″ tube, 7-1/2 hp., 1 phase, on transport

Hutchinson grain pump, 8″, approx. 65′, 10 hp., 1 phase, electric winch for lift, on transport, S/N948922

Westfield MK100-71 low pro swing hopper auger, 71’x10″, hyd. lift, 540 PTO

Farm King 866 loadout auger, 66’x8″, 10 hp., 1 phase, on transport

 

HOPPER BINS

Micada hopper bin, 6,000 bu., 24′ diameter, manhole, ladder, No base

(2) Schuld galvanized hopper bins, approx. 6 ton cap., unloading augers, bolted to concrete slabs

 

OTHER EQUIPMENT

Caterpillar GP18 forklift, propane, 3,500 lb. cap., 2-stage mast, side shift, 48″ forks, pneumatic tires, S/N3AM01144

2016 Notch 12TTL box scraper, 12′, hyd. tilt & lift, S/N16944

Nabors rock nabber, 3 pt., hyd. cylinder

Shop-built rock box, fits MX230

Pull-type track wacker

Track wacker, 3 pt.

 

BOAT

1995 Lund Tyee Magnum Sport deep V-fishing boat, 19-1/2’, walk-though windshield, marine band radio, GPS, Minn Kota bow mount trolling motor, depth finder, (2) live wells, trim pads, (4) pedestal seats, bimini top w/full enclosure, snap-on trailering cover, 2012 Mercury 150 hp., 4-stroke, low hrs., Spartan single axle roller trailer, MN lifetime trailer license, includes large asst. of rods, tackle, nets & etc., contact Mark Erickson for info, (218) 686-1616

 

TANKS

2,000 gal. fuel tank, Gasboy 110v pump

(3) 1,000 gal. fuel tanks, Gasboy 110v pumps

Riverbend 1,000 gal. water tank

 

PARTS

18.4-38 tires w/inside & dual rims, off Massey Ferguson 1135

GripTrac rubber tracks, 36″, fits Case-IH 7010

(8) IHC suitcase weights

(2) H&S spring loaded guidance cone wheels, fits planters

 

CLEM & GAIL ERICKSON

Clem 218.766.5194

or Tadd Skaurud at Steffes Group, 701.237.9173, or 701.729.3644

Photo Gallery