Preview is October 28–November 7 from 8AM-5PM and loadout will be November 7–11 from 8AM-5PM. For information contact Eric Henke, 701.340.0290 or Brad Olstad at Steffes Group, 701.237.9173 or 701.238.0240.

TIMED ONLINE AUCTION

 

LOCATION:  9400 275th Ave SE, Sawyer, ND 58781

 

OPENS:  FRIDAY, OCTOBER 28

CLOSES:  MONDAY, NOVEMBER 7

 

PREVIEW:  Friday, October 28 – Monday, November 7 from 8:00AM-5:00PM.

LOADOUT:  Monday, November 7 – Friday, November 11 from 8:00AM-5:00PM.

 

 

4WD TRACTORS

1991 Ford Versatile 846, Designation 6, CAH, LT10 Cummins, 230 hp., 12 spd., 3-range, decelerator pedal, 4 hyd., 600/65R38 band duals, shows 6,892 hrs., New main pivot & steering pins, S/ND475373

1981 John Deere 8640, CAH, 16 spd., quad range, accelerator pedal, 4 hyd., return flow, 3 pt. less arms, 1000 PTO, diff lock, 520/85R38 singles, approx. 95% tread, shows 10,994 hrs., engine work completed at approx. 10,000 hrs., S/N8640H008101RW

 

GPS EQUIPMENT

Trimble FM-750 display, receiver & antenna, RTK unlock, Swath Control, EZ-Pilot

Trimble EZ-Steer 500, complete system includes monitor, Ag-Leader EZ-Boom control box, motor, & receiver w/harnesses

 

AIR DRILL

2009 Horsch Anderson 40-15 air hoe drill, 40′, 15″ spacing, 3-section fold, disc closers, carbide pts., full run monitor, Raven cold flow Super Cooler, 27×8.5×15 rubber packer wheels, front tandem caster wheels, 2009 Horsch 500I tow-behind 3 compartment commodity cart, 10″ hyd. fill auger w/poly flighting, electric drive, dual hyd. fan & double chute, hyd. Torpedo winch hitch, NH3 hookup, Digi-Star EZ2400V scale, ground radar, AGCO monitor, shanks at 15″ w/paired row 6″ splitter, 520/85R42 duals, air drill S/NPS0126, cart S/NCC5000123

 

PLANTERS

2006 John Deere 1790 CCS planter, 23-row, 15″ & 30″ spacing, 2 pt., 3-section front-fold, pneumatic down pressure, John Deere row units & seed meters, 1/2 width disconnect, mechanical rate drive, liquid in-furrow, drag chains, 30″ row has pin adj., trash whippers, 15″ row had crank adj., Dawn trash whippers, 4″ gauge wheels, single notch closers, hyd. fold marker arms, hyd. fans, John Blue ground drive liquid system, 500 gal. poly liquid tank, Computer-Trak 350 monitor, corn & soybean plates, 11-22.5 tires on main, 10.00-15 tires on wings, S/NA01790E715155

John Deere 7200 vacuum planter, 12×30″, 2 pt., 3-section front fold, MaxEmerge II units, 1.6 bu. fiberglass hoppers, pin adj. trash whippers, ground drive, liquid in-furrow, 4″ gauge wheels, closers, (6) 70 gal. poly liquid tanks, rear hitch w/liquid plumbing, hyd. folding marker arms, std. corn plates, 7.60-15 tires, S/NA07200C400223

 

TILLAGE EQUIPMENT

2005 Salford 570RTS vertical tillage, 30′, 3-section fold, single pt. depth, 2-rank smooth contour discs, 2-rank 8-wave discs, approx. 20″ smooth & 19″ wave, weight pkg., 3-bar harrow, rolling baskets, walking tandems across, 11L-15 tires, less than 500 acres on new discs, S/N05399

Krause 1950 pull-type tandem disc, 32′, 8″ space, 3-section fold, tandems on main, singles on wings, approx. 20″ discs, mud scrapers, 11L-15 tires, S/N1774

Degelman Swathmaster 7000 pull-type harrow, 50′, 3-section manual trail fold, 4-bar harrow, manual pitch, 25″ tines, Valmar 2055 air flow granular fertilizer applicator, single compartment, ground drive, 16.5L-16.1 tires on main, 9.5L-15 tires on wings, S/N3722

Summers pull-type harrow, 40′, 5-bar harrow, manual fold, 11L-15 tires on main, 7.60-15 tires on wings, S/N63757

 

SPRAYER & CADDY

Ag Shield pull-type sprayer, 120′ boom, 20″ spacing, 1,000 gal. poly tank, 5-section fold, 6-section shut-off, 3-way nozzles & tips, wind curtains, New Hypro hyd. pump, auto boom height, 2″ plumbing, touchdown wheels, 550x60x22.5 tires, S/N306001

Liquid fertilizer caddy, 1,000 gal. poly tank, John Blue ground drive liquid pump, 2″ plumbing, front dolly hitch, 16.5L-16 front tires, 18.4-26 rear tires

 

STRIP TILL & NH3 EQUIPMENT

2013 Blu-Jet Coulter Pro NH3 strip tiller, 8×30″, AR700 MaxPac row units, Raven NH3 Super Cooler, rear hitch, LED safety lights, front gauge wheels, owner states only 130 acres on unit, no monitor included, S/N013673

1,000 gal. NH3 tank on 4-wheel running gear, 400/60-15.5 tires, S/N985665

(2) NH3 4-wheel running gears, 400/60-15.5 tires, Unit 1 & 2

 

GRAIN HANDLING & AERATION EQUIPMENT

Walinga 614 Deluxe grain vac, 6″, hyd. fold, 1000 PTO, cleanup kit w/flex & steel hose, 6.70-15 tires, pump needs repair, S/NMT614DLX93115545

Westfield MK100-61 swing hopper auger, 61’x10″, 540 PTO, single auger pit, hyd. lift, on transport, 225/70R15 tires, S/N6912

(2) Westfield folding hyd. drill fills, steel flighting, telescopic spout, S/N74213, S/N79611

 (2) Westeel GGL-82032 bin fans, 20 hp., 3 phase, 208/230v, used one season, S/N2019LSW02787, S/N2019LSW02788

 

OTHER EQUIPMENT

Midland 86 pull-type hyd. dump scraper, approx. 6 yd., front dolly wheel, (4) carrier wheels, 11L-15 tires, S/N17660

Canola roller, 8′, steel drum, 2″ ball hitch, 78-14 tires

North American LP-80 phase converter, 100 hp., 3 phase, PL-80-EER-D3, 208/240v, S/N08191955N

 

TIRES

(2) FarmPro Radial 85 20.8-38 tires, on Unverferth 10-bolt rims

(4) Firestone 14.9-46 tires & rims for John Deere 8640  

(2) Firestone 12.4-38 tires, on 8-bolt rims

(2) Firestone 27×8.50-15 packer wheels on rims & New Titan 33×15.50-16.5 14-ply tire, for Horsch Anderson air hoe drill

(6) 12.5L-15 tires, 8-ply, on 6-bolt rims

Misc. tires: (8) 14.5, (4) 7.50-18 tires, 185/70R14, 155R12, 235/65R16, 225/75D15, 235/75R15

 

PARTS & FARM SUPPORT ITEMS

Unverferth wheel spacers, 29-1/2″, 10-bolt, S/N14961B

Salford parts: weights, shanks, hubs, approx. 16″ wave coulter assemblies

Sunflower head parts: 9″ pans for 25′ head; (2) high boards

WEG Nema electric motor, 7-1/2 hp., 3 phase, 230/460v

 

ERIC HENKE

701.340.0290

or Brad Olstad at Steffes Group, 701.237.9173 or 701.238.0240

Photo Gallery