Preview & loadout by appointment. For information contact Kevin, 218.849.9441 or Tadd Skaurud at Steffes Group, 701.237.9173 or 701.729.3644.

TIMED ONLINE AUCTION

 

LOCATION:  13116 US Hwy 10, Lake Park, MN 56554

 

OPENS:  MONDAY, NOVEMBER 21

CLOSES:  WEDNESDAY, NOVEMBER 30, BEGINNING AT 12:00PM

 

PREVIEW:  By appointment.

LOADOUT:  By appointment.

 

 

TRACK TRACTOR

2013 Case-IH 500 Quadtrac, luxury cab, leather, buddy seat, powershift, 6 hyd., return flow, power beyond, 1000 PTO, integrated auto steer, Pro 700 display, 372 receiver, HID lights, front tow cable, 30″ tracks, 3,009 hrs., New front tracks in 2022, S/NZDF135370

 

4WD & MFWD TRACTORS

2001 Case-IH STX275, deluxe cab, buddy seat, powershift, 4 hyd., return flow, 1000 PTO, front & rear diff lock, integrated auto steer, 380/90R50 duals, shows 3,643 hrs., corner post has been replaced approx. 9,000 total hrs., S/NJEE0097515

1978 White 4-210 Field Boss, 4WD, CAH, 3208 Cat, 3 spd. over/under, 3 hyd. 3 pt., 1000 PTO, 18.4-38 duals, 8,584 hrs., S/N275594-418

2013 Case-IH 315 Magnum, MFWD, deluxe cab, buddy seat, 6 hyd., return flow, 3 pt., 1000 PTO, diff lock, integrated auto steer, Pro 700 display, 372 RTK receiver, HID lights, (18) front suitcase weights, 380/80R38 front duals, 380/90R54 rear duals, 3,235 hrs., S/NZDRD02505

 

GPS EQUIPMENT

Trimble FM-1000 display, Auto Steer, Water Management unlock, RTK radio, Master Switch box, S/N5047590283

 

 

HARVEST EQUIPMENT

2011 Case-IH 8120, PRWD, deluxe cab, buddy seat, CVT drive, Field Tracker, hopper ext., integrated auto steer, Pro 700 display, 262 receiver, no NAV controller, equipped for Precision 20/20 display, (2) New large wire concaves installed during harvest, Michelin 620/70R42 duals, 600/65R28 rear tires, 2,110 sep. hrs., 2,619 engine hrs., S/NYBG213223

2004 Case-IH 2062 flex draper, 30′, finger reel, hyd. fore/aft, AHH, poly, Flagship mounts, S/NCCC0015035

2011 Capello 1222 chopping corn head, 12×22″, knife rolls, hyd. deck plates, Insight header height, poly snouts, hyd. end rollers, (12) stalk stompers, Flagship hookups, Headsight box is not working, S/N8300

Killbros 6-wheel tandem axle header trailer, 30′, dolly front, adj. flex bar

Shop-built single axle header trailer, 25′, adj. flex bar, 6-bolt hubs, used for 12×22″ corn head

 

GRAIN CART & GRAVITY BOXES

Parker 838 grain cart, approx. 850 bu., front auger, roll tarp, 1000 PTO, 30.5-32 tires, S/NB20300124

Minnesota 250 gravity box, approx. 250 bu., on John Deere 4-wheel running gear, 9.5L-15 tires on 6-bolt hubs

Parker J-210D gravity box, approx. 250 bu., on 4-wheel running gear, 9.5L-14 tires on 6-bolt hubs, S/N7221588

 

 

AIR DRILL & TRACK ELIMINATOR

Case-IH SDX40 air drill, 40′, 7-1/2″ & 15″ spacing, tandems across, 4″ gauge wheels, full run blockage monitor, w/Case-IH ADX3430 tow-behind commodity cart, 3 compartment, 430 bu., hyd. fan, 30.5L-32 tires, air drill S/NCBJ0017047, cart S/NCBJ0019324 

Shop-built track wacker, 12-1/2′ wide, 2-rank S-tines, gauge wheels, hyd. lift, brackets for the rear of Case-IH ADX3430 tow-behind commodity cart

 

PLANTER

Case-IH 1240 pivot planter, 24×22″, central fill, Delta hyd. down pressure, Precision v-Set meters, notched closing wheels, spoke gauge wheels on end (3) rows, Clean Sweep pneumatic row cleaners, in-furrow liquid fertilizer, (2) 250 gal. tanks, hyd. variable rate pump, 1000 PTO pump, 16.5L-16.1 flotation tires, S/NYAS008625

 

SEED TENDER

Christianson Seed Vac seed tender, 2-box stand, Kohler 8 hp. gas motor, pneumatic blower system, no trailer

 

 

TILLAGE EQUIPMENT

Riteway PCR-4245 land roller, 45′, 42″ drums, auto fold, tandems on main, S/NPCR01-194

Case-IH TM200 field cultivator, 50′, 5-setion fold, walking tandems across, wing gauge wheels, 9″ knock-on sweeps, 4-bar harrow, S/NJFH0039017

Case-IH Flex-Till 600 chisel plow, 37′, 12″ spacing, floating hitch, tandems across, 3″ spikes, Summers 3-bar harrow, S/NYDS045123

Case-IH 5850 chisel plow, 36′, 12″ spacing, walking tandems across, no harrow, no shovels, S/NCKB0020616

McFarland WDL2060 spike tooth harrow, 60′, 16-bar sections, auto fold, walking tandems on main, S/N9242

(38) Double coulter vertical tillage attachments, 16-1/4″ 13-wave blades, spare parts

 

SEMI TRACTORS

1996 Mack CH613 tandem axle day cab, Mack E7, 350, 10 spd., air susp., air slide 5th, air shift PTO, cruise, diff lock, Saf-T-Pull, 2-line wet kit, poly 1/2 fenders, 184″ WB, 11R22.5 tires, 977,110 miles

1990 Mack CH613 tandem axle day cab, Mack EM7 300 hp., 6 spd., air slide 5th, diff lock, dual fuel tanks, 1/2 fenders, 196″ WB, 295/75R22.5 tires on budd rims, shows 451,135 miles, speedometer & odometer not working

 

TENDER & BOX TRUCKS

1980 GMC Brigadier tandem axle, Detroit diesel, 7 spd., spring susp., Willmar 16 ton fertilizer tender, 2 compartment, roll tarp, rear discharge auger w/controls on end of auger, 11R22.5 tires on steel rims, shows 175,199 miles

1975 IHC Transtar 4300 tri-axle, Cummins 230, 13 spd., spring susp., pusher axle w/8.25-20 tires, Wilson 22’x96″x64″ aluminum box, hoist, roll tarp, 3 pc. end gate, 10.00-20 tires, shows 175,061 miles, runs but needs batteries

 

PICKUP

1996 Ford F350 Super Duty, reg. cab, 7.3L diesel, 5 spd. manual, 2WD, steel flatbed, 300 gal. fuel service tank w/12v pump, electric air compressor, toolboxes, 235/85R16 rear duals, 289,417 miles, torch set, welder/generator & cord reels sold separately

 

HOPPER BOTTOM TRAILERS

2000 Jet tandem axle steel hopper bottom, 34’x96″x68″, ag hoppers, spring susp., Shur-Co 4500HD electric roll tarp w/wireless remote, 2 spd. traps, 11R24.5 tires on steel rims

1994 Timpte Super Hopper tandem axle hopper bottom, 40’x96″x78″, spring susp., Shur-Co 3500 electric roll tarp w/wireless remote, 2 spd. traps, 2-rows marker lights, 11R24.5 tires on steel rims

 

OTHER TRAILERS

1986 Fruehauf single axle dry van trailer, 28′, spring susp., rollup door, (2) 1,750 gal. poly tanks, 2″ transfer pump, (2) 30 gal. mix cones & (1) 15 gal. mix cone, hose reel, rear step, 11R22.5 tires on steel rims

Tandem axle pup trailer, 19′ box, hoist, roll tarp, drawbar hitch, 9.99-20 tires, needs hoist plumbing completed, No Title, non-roadable

Shop-built tandem axle trailer, 8’x16′, wood deck, torsion susp. axles, ramps, 7.00-15 tires on 6-bolt hubs, 2″ ball hitch, No Title, non-roadable

 

SPRAYER

Top Air TA116 pull-type sprayer, 90′ booms, 1,600 gal. poly tank, hyd. pump, triple nozzles, rinse tank, 5-section control, setup to run FM-1000 display, adj. axles, 380/90R46 tires, S/NB24260129

 

GRAIN HANDLING EQUIPMENT

Kongskilde SUC 500 TR grain vac, 6″, folding spout, asst. piles, clamps & clean up kit, 540 PTO, S/N1001061

Shop-built portable grain vac, 4″, 7-1/2 hp & 3/4 hp. 3 phase electric motors, fork pockets

Clipper No 27 grain cleaner, asst. screens

Grain Master 3412E belt conveyor, 34’x12′, 7-1/2 hp., 220v, 1 phase, std. hopper, on transport, S/N3199

Westfield MK100-61 swing hopper auger, 61’x10″, std. hopper, hyd. lift, 540 PTO, S/N91420

Mayrath loadout auger, 36’x10″, 10 hp., 220v, 1 phase electric motor, on transport, S/N9358652

(2) Asst. pencil augers, 15’x4″ & 8’x4″, electric motors on both

 

AERATION & BIN EQUIPMENT

OPI-One grain temperature monitoring system, (7) sensors, hand-held reader, New, never installed

Motomco 919 grain moisture tester, balance scale, S/NC-1228

(3) Asst. bin fans, 24″, 18″ &14″

(3) AgriDry grain spreaders, gravity flow, fits up to 36′ bin

(2) Bin top roof vents

 

 

SCRAPER

Letourneau direct mount scraper, approx. 12 yd., hyd. push off, 105″ cut, (2) hitches for Case-IH STX & 70 Series, 21.00-25 tires

 

 

TRENCHER

Ditch Witch C99 walk-behind chain trencher, Wisconsin gas motor, 4″ chain, S/N5E0324

 

SKID STEER ATTACHMENTS

Bobcat 709 skid steer backhoe, (2) buckets w/frost teeth, joystick controls, universal skid steer mounts w/bolt-on brackets, S/N270003694

Hitch Doc 725 skid steer snowblower, 72″, hyd. spout & tip adj., skid shoes, 15 gpm, universal skid steer mounts, S/NHDS1501

Loftness Quick Pick 600 hyd. skid steer rockpicker, universal skid steer mounts, S/N 75-5-20

Steel skid steer tracks, over the tire style, fits 10.5 tires

 

TANKS

True North Steel 10,000 gal. double wall fuel tank, Fill-Rite FR311V110v pump, meter, hose reel

Ace Roto-Mold 3,000 gal. poly tank, 2″ fitting

1,500 gal. poly tank, 2″ fitting

750 gal. tank w/steel saddle

Dee Zee aluminum diamond plate fuel service tank storage compartment, 40 gal., 56″x9″x19″, GPI 150S 12v pump

 

TIRES

Goodyear DT800 380/90R50 tractor tire, approx. 50% tread

(5) New implement tires on 6-bolt used rims, (3) 11L-15, (2) 9.5L-15   

(2) 11L-15 implement tires on 6-bolt rims, (1) 15″ 6-bolt rim

(2) 31×13.50-15 implement tires, (1) is on 8-hole rim

(2) Asst. truck tires, (1) 7.50-16 on 8-bolt rim & 8.25-20 tire

(3) Asst. tires; (2) 295/75R22.5 & (1) 275/80R22.5

(4) Asst. tires; (3) 11R22.5 tires on steel Pilot rims & (1) 11R24.5 tire on steel Pilot rim

(2) 10.00-20 tires on split rims & steel 24.5 budd rim

 

PARTS

Case-IH set of (4) small wire concaves

(21) Case-IH 11″ ripper pts., off 9300 ripper

(24) Pin adj. trash whippers, off Case-IH 1240 planter, setup for 22″

(24) Drag chains for planter, was mounted on Case-IH 1240 planter, little use

Case-IH asst. planter parts, factory closing wheels, meters, etc., taken off a Case-IH 1240 24 row planter

(12) Case-IH gauge wheels, off 1240 planter

Case-IH manifold system for field cultivator, (8) towers, wiring, hyd. hoses, deflectors & asst. brackets, was used on 50′ TM200 field cultivator, could be adapted to fit other models or sizes

Case-IH manifold system for chisel plow, (8) towers, blockage sensor wiring less sensors, wiring, hyd. hoses, boots & asst. brackets, was used on 37′ chisel plow, could be adapted to fit other models or sizes

Precision Planting 20/20 SeedSense module & Climate FieldView drive hub

Nylon 4-ply tow strap, 100,000 lb. breaking strength, loops on each end, (2) 1-1/4″ clevises

Nylon braided tow strap, 3-strand, loops on each end, (2) HD clevises, HD log chain

Pallet of asst. U-bolts

(18) Case-IH suitcase weights

Crate of asst. weights: (5) Ford suitcase, (1) Case-IH suitcase & (3) asst. wheel weights

(6) Pcs. screen material, 9’x36″, used for aeration screen for canola

Flex-Auger power unit & outlet end for feed auger system, 3/4 hp., 1 phase, 230v

 

SHOP EQUIPMENT

Miller Bobcat 225 welder/generator, 8,000 watt, 120v/240v, welding rods w/leads, 436 hrs.

Parker DE30 hyd. hose machine, 110v, foot controls, asst. hose & end inventory, S/NDE30-0714-04067

Daytona HD 16 spd. drill press, 5/8″ chuck, floor stand, 3/4 hp., 110v

(2) C-Aire II air compressors, 22 gal. tank, 4 phase, 110v, 9.3 CFM, (1) water separator w/hose & (1) w/hose

Shop-built air compressor, Dresser 2 cyl. compressor, 120 gal. tank, 10 hp. 1 phase motor

 

 

FARM SUPPORT ITEMS

Pallet of asst. liquid pumps: 3 hp. 1 phase motor w/2″ transfer pump, 5 hp. gas motor w/2″ transfer pump & Delavan 5 gpm 12v pump

Shop-built water pump, 3″, 10 hp. 1 phase electric motor, asst. suction & discharge hoses

Fill-Rite DEF pump, 8 gpm, 120v, hose w/SS nozzle, mounts on side of mini bulk

Fill-Rite 1200A 12v fuel pump

Pallet of asst. electric motors: 1 & 3 phase, various sizes

(2) Truck storage boxes, (1) steel 72″x16″x13″ & (1) poly 60

 

 

KEVIN & CANDACE LUNDE

Kevin, 218.849.9441

or Tadd Skaurud at Steffes Group, 701.237.9173 or 701.729.3644

Photo Gallery