LARGE SPRING MULTI-PARTY FARM EQUIPMENT AUCTION

 

Thursday, June 11th, 2020 – 9:30am

 

Location: Leeds, ND – 1 mile west of Leeds, ND on the south side of Hwy 2

 

COME PREPARED TO BUY AT TWO RINGS

 

AUCTIONEER’S NOTE: Each year, this has been a huge auction that always features an outstanding line of well-kept equipment. If you are looking for a specific piece, be sure to look this entire list over carefully, as equipment is categorized by owner rather than by type of equipment. Additional note: This is a partial list. New consignments are arriving daily.

 

INTERNET BIDDING: This auction will feature live internet bidding. For live bidding the day of the auction, go to www.proxibid.com. Pre-registration is required prior to auction day. Internet bidding starts at 10:30 am.

 

Lunch will be served!

10. Lynn Arnold ­– Esmond ND – 701-381-0285

– 2011 326 JD skid steer, gravel bucket, snow bucket, manure bucker w/ fork, 650 hrs.

– 72’ Bourgault heavy harrow

– 30’ header trailer, like new

 

11. Fred Rance – Devils Lake ND – 701-230-3205

– 41’ Wilrich chisel plow w/ Ron’s Repair coulters, 3 bar harrows

– Ashland 6 yd. scraper

 

12. Tim Krueger ­Egeland ND – 701-230-1821

– 3594 Case IH FWA, 7255 hrs., 3 pt., duals, (4) Hyd., return line for air seeder, PTO, LED lights, 24 sp. power shift, 18.4 42 rear duals, 18 x 26 front tires, &7686 winter maintenance at 7120 hrs., stored inside, S/N 9947866

– 930 Case Comfort King, 5754 hrs., 4 sp. w/ hi/lo, power steering, dual hyd., PTO, new tires, 23.1 x 30 rears, 10:00 x 16 front, S/N 8280479

– 900 Case diesel, 7768 hrs., dual hyd., 6 sp. trans., power steering, PTO, new tires, 18.4 x 34 rears, 7.50 x 18 fronts, S/N 8129677

– 27’ 625 Morris chisel plow w/ harrows, inside tandems, rebuilt trips

– ATV utility trailer, 3’ x 5’ tilt bed, ATV tires

– Hart Carter seed cleaner

– Co Fax wild oats cleaner

– New & used shovels for Morris

– (5) Used 11L x 15 implement tires

– (2) Aluminum fuel tanks fir truck w/ brackets, 125 gal. ea.

– (2) Small engines

– (3) Elec. motors

– 11½’ cattle gate

– (22) Wood posts, 8’,10’ & 12’

– Band saw

– Scroll saw

– Belt sander

– 4000W Champion portable generator, new, never started

– 1000W Atec generator, has 12V 15 Amp charger built in

 

13. Anthony Zimbelman – Granville ND – 701-260-1239

– 1977 JD 4630 tractor, 8000 hrs., 725 JD loader & grapple

– 1977 JD 4630 tractor, 12000 hrs., 158 JD loader & grapple

– 2002 JD Model 4895 w/ 16’ 895 power reverser head, completely rebuilt head, 4000 hrs.

– Approx. (5) panels, Hi Hog, Powder River, or sucker rod

 

14. Brian Johnson – Dunseith ND – 701-263-1815

– 1998 Massey Ferguson 6270 MFD tractor, 2 hyd., PTO, 3 pt., approx. 6000 hrs.

 

15. Darrell Odegard – Egeland ND – 701-230-1613

– 25’ Case IH 8220 pull type swather, finger reel, been shedded, exc. shape, rebuilt pitman & cutter bar

 

16. Paul Berntson – Adams ND – 701-331-1614

– 110’ 2005 Summers high wheel sprayer, 1500 gal. tank

– 45’ Wilrich 3400 heavy duty field cult., complete walking tandems w/ harrows

 

17. Greg Graber – Wolford ND – 701-583-2271

– 1975 Chevy C65 grain truck, single axle, 16’ box & hoist, 366 Big Block, roll tarp, 5+2, 47,350 orig. miles

– Brandt Model 4500 grain vac

 

18. Norman Hanson – Devils Lake ND – 701-351-1906

– (2) 25’ Premier 1900 swathers, finger reels, factory transport, shedded, good

 

19. Jake Hegland -­ Oberon ND – 701-793-1818

– 2014 Load Trail 26’ flatbed tri-axle, bumper pull, 4’ beaver tail, wood deck, flip up ramps, low profile, ST235/30R16 tires, S/N 4ZECH2637E1064875

 

20. Kevin Mueller – Munich ND – 701-370-9022

– 1970 Chevy C60 tag tandem grain truck, 427, 18’ Knapheide box w/ roll tarp, 5+2, Super clean, 92,000 miles

– JD Model 37 pull type sickle mower w/ 9’ bar

– Adasco shaker 2 screen grain cleaner

– Pickup box trailer, full size

– 180 gal. service tank w/ 12V pump

 

21. Elvin Slaubaugh – Wolford ND – 701-771-2326

– 44’ Knife NH3 applicator, coulters in front of knives, winch in back

– (2) Canola swath rollers

 

22. Kevin Slaubaugh or Jeff Walsh – Wolford ND – 701-351-8358

– (2) JD 567 8-wheel rakes

– 61’ x 10’ Westfield grain auger w/ swingout, hyd. lift

– Dual 3100 loader w/ grapple from 3010 JD tractor

 

23. Mike Geisen – Bisbee ND – 701-739-9495

– 80’ Summers Ultimate sprayer, 1000 gal. tank, 200 gal. rinse tank, 3-way nozzles, hyd. pump

– 8’ Farm King snowblower, 2 augers, 2 stage

 

24. Teubner Farms Inc., Jeff Teubner – Cando ND – 701-303-0104

– 2000 Brandt 70‘ Contour Commander 7000 harrow

– JD 41’ 1000 Series field cultivator w/ 3 bar Herman harrows

 

25. Northern Plains – Carrington ND – 701-427-6013

– 1990 Kenworth T40, 367,352 miles, 9 sp., Cummins TA10, 611 CID, 270hp, crane mounted knuckle boom Iowa Mold Tooling Co., Model 723

 

26. Bruce Overby – Binford ND – 701-797-7979

– 1995 Case IH MFD Maxim 5240 tractor, 100 hp, 520 Case IH loader w/ grapple & joystick controls, left hand reverser, 2 hyd., 18.4 38’s (60%), 14.9 28 fronts, uses no oil, hand brake needs work, exc. tractor

– 835 Versatile, 18.4 38’s, 4 hyd. plus one for air seeder (separate pump), 7274 hrs. overhauled at 4327 hrs., good seat, new cab kit, radio, A/C & heat

 

27. Philip Hearn – Mylo ND – 701-550-9632

– 2014 Int. ProStar day cab semi, 450 hp, 10 sp., MaxForce engine

 

28. Robert Blegen – Churchs Ferry ND – 701-351-0170

– 1978 IHC 1700 hyd. tandem truck w/ Frontier box, roll tarp, twin post hoist

– 25’ Premier 1900 swather

– 610 JD 41’ chisel plow w/ 104 harrows

 

29. Roger Rance – Egeland ND – 701-739-7447

– 25’ JD Premier swather, p.t., finger

– 7’ JD 37 sickle mower

– 8’ Canola roller

– 914 JD pickup

 

30. Andrew Porsborg/Gooseneck Imp. – Minot ND – 701-852-4667

– 40’ Gates Coulter disk, sidewinder blades, no harrows or baskets

– Case IH RBX563 baler, regular, twine, 1000 PTO, hyd. pickup

– MF 2856A Megawide baler, twine, wrap, 1000 PTO, hyd. lift, auto cycle

– 96” Red Devil 9664D snow blower, 2 stage, 3PT, dual auger, hyd. spout rotation, 540 PTO

– (4) Firestone 600/65R38 floater tires, fits 4830

 

31. Al Edwards – Bisbee ND – 701-656-3602

– Hardi Commander hi-wheel sprayer w/ monitor, nice working unit

 

32. Craig Schommer – Munich ND – 7041-371-1284

– 70’ Gates heavy harrow, hyd. down pressure

 

33. Mike Tofsrud – Minnewaukan ND – 701-351-2503

– 8820 JD Titan 2 combine, green top, new cylinder drive belt, variable speed drive belt & chopper belt installed

– JD 212 pickup head for 8820

 

34. Bill Hartl – Starkweather ND – 701-292-4443

– Propane furnace

– Propane heater

 

35. Nyle Myhre – Sheyenne ND – 701-302-0747

– Misc. Farm items & equipment

 

36. Tom Good – Rolla ND – 701-477-6955 or 550-9259

– 8850 JD 4WD tractor, 24.5 32 duals (50%), PTO, 4 hyd., JD V8 motor, needs head gasket, runs

 

 

 

 

 

 

PARTIAL LIST, EQUIPMENT ARRIVING DAILY

 

 

Your North Central North Dakota Auction Leader!

 

Visit our websites at www.midwestauctions.com/dakota or www.globalauctionguide.com or www.dakotaauctioneers.com

 

Dakota Auctioneers, Larry Swenson, (701) 968-4224 Office or (701)-303-0379 Cell

 

Photo Gallery

Notes:

Your North Central North Dakota Auction Leader!

 

Visit our websites at www.midwestauctions.com/dakota or www.globalauctionguide.com or www.dakotaauctioneers.com

 

Dakota Auctioneers, Larry Swenson, (701) 968-4224 Office or (701)-303-0379 Cell

Disclaimer:

Announcement: Information contained herein is presented on behalf of the seller. Dakota Auctioneers, agent for the seller, cannot guarantee the information to be correct or assume the liabilities for errors and omissions. All lines drawn on maps are approximate. Buyers should verify the information to their own satisfaction. Any announcements made from the auction block on day of auction will take precedence over any matter of print and will be final.