26 August, 2020 1:00 pm
Online Manure Pumping & Handling. Steffes Group, Litchfield Office 320.693.9371.
MANURE PUMPING & HANDLING AUCTION
OPENS: MONDAY, AUGUST 17
CLOSES: WEDNESDAY, AUGUST 26 BEGINNING AT 1:00PM
TANKERS & TRAILERS
2008 Jamesway 7400 tri-axle liquid manure tanker, hyd. drive pump, 6×30″ Dietrich injector, includes flow meter & Raven 660 monitor, front/rear steer, Alliance 850/50R30.5 tires, S/N051000009-0060
Jamesway 6800 tri-axle liquid tanker, bar w/swivels, front/rear steer axles, setup for VTI
1971 Fruehauf tanker trailer, 6,000 gal., 6″ discharge, spring suspension, 22.5 tires
1966 Courtland 6500 manure tanker trailer, spring ride, 8″ low flow system, off load system, 11R22.5 tires on Dayton wheels
2012 H&H Speed Loader tandem axle bumper hitch trailer 22′, tilt deck, heavy duty 15,000 lb. winch, 235/85R16 tires, S/N533MX2420CC216337
MANURE PUMPS & AGITATORS
2012 Puck 2067C lagoon agitator, John Deere diesel engine, 6.8L, Cornell pump, self-priming, HID lights, cordless remote (In Shop), 3,051 hrs., S/N460024, owner states good working order, single owner
Booster pump, John Deere 9.0L engine (S/NRG6090L119367), Cornell 19-1/2″ hybrid pump (model 6819MPC-HYB-F18DBK, S/N206640), Murphy EMS Pro controller, twin disc clutch, 8″ inlet/outlet & bypass, hyd. pump to run slicer valves & trailer tongue jack, fuel tank, on PJ pintle hitch tandem axle trailer, ST235/80R16 tires, 2,640 engine hrs.
Boost pump, John Deere 350 hp. engine, setup for 40 gpm hyd. pit pal, Cornell pump, pig shooter, Twin Disc clutch, Pivot Power controls, on 2017 PJ bumper hitch deck over trailer (S/N4P5F8202XG1250727), 9,307 hrs.
Boost pump, John Deere 6068T diesel engine, 17” Pioneer pump, Twin Disc clutch, safety controls, twin fuel tanks, on tandem axle bumper hitch trailer
Hydrostat lagoon feeder, 60′, 1.25″ hyd. hose, 8″ top tube, hyd. car to raise & lower hyd. outriggers, (2) hoses are 30′, 6,000 PSI, can run Doda or Nuhn, 2,200 rpm, Everything was purchased from Puck Enterprises, Built Summer of 2012, used in 2019
2012 Jamesway pump
Houle lagoon pump, 52′, 8″ pump, wall walker option, New prop, gear box & 1000 rpm PTO shaft, S/N1002-033171-T52
Houle lagoon pump, 42′, 540 PTO, hyd. drive line, wall walking tires
2007 Jamesway lagoon pump, 42′, on transport, S/N47423048
Doda pit pump, on transport, used very little
Gea Houle AP-3B-10 vertical pit pump, 10′, 1000 PTO, single nozzle, S/NCAA1-1505112
Dryhill Tip-In DH220 lagoon pump, 10’x8″, 2 pt., 1000 PTO, (1) nozzle, S/N2011
Balzer Tip-In pump, 8’x6″, 3 pt., 1 season on new gear boxes
Badger BN104 manure pit pump, 540 PTO, pull-type, single nozzle, sells w/approx. 40′ of 6″ hose, on transport, S/N32121B0008-18146
Houle lagoon pump impeller housing, 8″ outlet, 20″ housing, (part#2010-7623-820)
Houle lagoon pump impeller housing, 6″ outlet, 26″ housing, (part#2010-7643-840)
Balzer prop agitator, 32’, 540 PTO, trailer style, 11L-15 single wheels, S/N524-0302
Phil’s Pumping lagoon pro agitator, purchased new in 2018, S/N5094501
HOSE CARTS
2010 Hose cart, hyd. level arm, hyd. reel, tandem axle, 22.5 tires (Jerry’s Pumping Built)
Cadman 6003 hose caddy, 3 pt., includes 570′ section of 6″ mainline hose, has (2) menders
Shop-Built hose cart, hyd. drive, single axle, floater tires, Built in 2005
Shop-Built hose cart, hyd. reel, tandem axle
MANURE HOSE
2014 Manure hose, 8″, (1) hard mender & (1) marked hole, Used spring of 2020
2014 Mainline hose, 8″, (2) hard menders, Used spring of 2020
Mainline hose, 600′, 7″, maroon
Mainline hose, 1,963′, 6″, (10) menders
Mainline hose, 621′, 6″, (1) splice, red
Mainline hose, 590′, 6″, (2) splices, red
Mainline hose, 624′, 6″, yellow
Mainline hose, 661′, 6″, (2) splices, black
Mainline hose, 660′, 6″, orange
Mainline hose, 641′, 6″, red
Mainline hose, 592′, 6″, red
Mainline hose, 654′, 6″, orange
Mainline hose, 658′, 6″, (2) splices, black
Mainline hose, 575′, 6″, black
Mainline hose, 640′, 6″, (1) splice, black
Mainline hose, 636′, 6″, (1) splice, black
Mainline hose, 665′, 6″, (1) splice, black
Mainline hose, 621′, 6″, black
Mainline hose, 583′, 6″, (1) splice, black
Mainline hose, 652′, 6″, (2) splices, black
Mainline hose, 6″, includes (3) lengths
Mainline hose, 6″, no menders
(4) Mainline hose, lengths to include 608′, 665′, 687′ & 1,050′, 6″, (1) mender each hose
Drag hose, 6″, (1) length
Drag hose, 5-1/2″, included (3) lengths
Drag hose, 1,200′, 5″, (4) menders
Hard suction hose, 45′, 6″
INJECTORS & APPLICATORS
2018 Bazooka Farmstar T261839CT-HD Titan Series, pull-type coulter injector, 39-1/2′, 18″ spacing, 8″ swing pipe w/8″ flow meter, auto grease option, high flow pkg., S/N19030821, first time used 2019
2009 Injector, 28′, 3 pt., 24″ spacing, hyd. wing fold, John Deere shanks, (14) total shanks, equalizer manifold, gauge wheels (Built by Jerry’s Pumping)
Kongskilde 1025 applicator injector, 18′, 3 pt., (25) shank, wing fold, 6″ main inlet, 4-1/2″ reversible points, Vibro flex shanks, screw adjust, Drewkolben Pumper distributor, light kit, depth gauge wheels, Field Ready
Hydro Engineering manure applicator, 25′, 3 pt., 13 shank, 6″ stinger, Jag swivel & double swivel, 6″ Rosemount flow meter w/display, Hydro distributor w/2″ drop tubes, 6″ pig cleanout & Case-IH shanks
John Deere 960 field cultivator, 25′, 3 pt., hyd. wing fold, manure splash pads, 5″ swing tube & 6″ flow meter
2018 Zoske Kodial Series, toolbar disc incorporator, 24′, 24″ spacing, 3 pt., 6″ hydro engine swing pipe, Vortex balde opener, double disc closing blades, Krohne flow meter, in cab controls
John Deere pull-type toolbar, 45′, hyd. wing fold, 6″ piping w/flow meter, John Deere TruDepth standards
VTI toolbar, 6 row, off manure tank
(2) Manure tank toolbar
VAC TANKS & LOAD STANDS
Kuhn Knight Prospread PS160 tandem axle manure spreader, 20′ box, 1000 PTO, vertical beaters, apron unload, hyd. end gate, 600/55R22.5 tires on 10-bolt rims, S/N00057
Shop-Built load stand, 35’x10″, manual raise/lower, on transport, ST205/75D15 tires
Loadout stand, on transport
Calumet 3750 vac tank
Clay vac tank, 1,500 gal.
AIR COMPRESSOR
Sullair 375H air compressor, 375 cfm, Cat engine, diesel, on transport, 3,168 hrs., working order
MOTORS
Weg electric motor, 400 hp., 1,785 rpm, 3 phase
Eastern electric motor, 200 hp., 1,780 rpm, 460v, 3 phase
Century electric motor, 125 hp., 1,780 rpm, 460v, 3 phase
PARTS
(5) Gate valves, 8″, w/wheels, includes (3) Waterous 39H3, (1) Stockman & (1) unknown”
(6) Gate valves, 6″, w/wheels, includes (2) Mueller & (4) Waterous
(4) Waterous 93H3, gate valves, 8″, w/wheels
Pallet of misc. valves & couplers, includes (1) 6″ butterfly valve, (1) 6″ slicer valve, (1) 6″sewer pipe flange, (1) 8″ butterfly valve, (3) 8″ splices, (1) 8″ coupler (less insert) & (3) 8″ band segments
Twin disc clutch & housing
(2) Coupler sets, complete
(9) Menders
(2) Misc. menders
Box of 5″”couplers
Radio engine controls
MANURE PUMPING & HANDLING AUCTION