20 August, 2020 7:00 pm
Due to health reasons Mike’s family has decided to sell the equipment. Most equipment purchased new or slightly used from the local Case-IH dealer. Loadout: Friday, August 21, Monday, August 24 & Tuesday, August 25 from 8:00AM – 5:00PM. For information contact Steffes Group, 320.693.9371, Eric Gabrielson 701.238.2570
FARM RETIREMENT AUCTION
LOCATION: Steffes Group Facility, 24400 MN Hwy 22 S, Litchfield, MN 55355
OPENS: MONDAY, AUGUST 10
CLOSES: THURSDAY, AUGUST 20 BEGINNING AT 7:00PM
PREVIEW: Monday – Friday 8:00AM – 5:00PM
LOADOUT: Friday, August 21, Monday, August 24 & Tuesday, August 25 from 8:00AM – 5:00PM
AUCTIONEERS NOTE: Due to health reasons Mike’s family has decided to sell the equipment. Most equipment purchased new or slightly used from the local Case-IH dealer.
4WD & MFWD TRACTORS
1992 Case-IH 9250 4WD, CAH, powershift, 4 hyd., K&M rock box, Firestone 20.8R-42 tires w/band duals, 6,400 hrs., S/NJCB0028778, newer batteries & new exhaust pipe
2006 McCormick MTX120 MFWD, CAH, partial powershift, left hand reverse, 3 hyd., 3 pt., 540/1000 PTO, diff lock, ext. mirrors, left & right hand doors, Sturd-E-Built rock box, Continental 380/85R28 front tires, Continental 460/85R38 rear tires w/duals, 1,807.9 hrs.
1992 Case-IH 7120 Magnum MFWD, CAH, powershift, 3 hyd., 3 pt., 540/1000 PTO, diff. lock, front weights, Firestone front tires, Firestone 18.4-42 rear tires w/hub duals, 4,348 hrs., S/NJJA0044902
COMBINE & HEADS
1998 Case-IH 2366, PRWD, Cummins, AFS Y&M monitor (less key card), specialty rotor, rock trap, chopper, Maurer hopper top, Alliance 30.5-32 front tires, Firestone 16.9-26 rear tires, 3,460 sep. hrs., 4,332 engine hrs., S/NJJC0185331
2009 Case-IH 3206 corn head, 6×30″, hyd. deck plates, flex shafts, knife rolls, Case-IH 2366 mounts, S/NY9S019602
2004 Case-IH 1020 flex head, 20′, 3″ cut, hyd. fore/aft, flex shafts, S/NJJC0334987
Melroe pickup head w/Case-IH mounts
PLANTER
2009 AGCO 8200 planter, 12×30″, front fold, VacuMeter, ground drive, 3 bu. boxes, Yetter row cleaners w/depth bands, markers, S/NHU22200151
TILLAGE EQUIPMENT
Case-IH 4300 field cultivator, 35′, 9″ knock-on sweeps, hyd. wing fold, tandems on main & wings, 3-bar harrow, S/N0621950
IHC 4500 field cultivator, 20′, hyd. wing fold, C-shank, 3-bar harrow
Case-IH 530C disc ripper, 5 shank on 30″ spacing, 10″ points, 9″ DMI covering boards, C-shank w/lead shanks, rear disc leveler, S/NJFH0052124
IHC 496 disc, 24′, hyd. wing fold, rock flex, tandems on main frame & wings, S/N157372
Kewanee 800 plowing disc, 16′, pull type, tandems on main frame, rock flex, notched blades
IHC 183 row crop cultivator, 8×30″, hyd. wing fold, Danish tines
Dakon row crop cultivator, 6×30″, 3 pt., Danish tines
1986 IHC 700 plow, 7×18″, on land, spring loaded ripple coulters, S/N2115
IHC 720 plow, 6×16″, semi-mount, spring loaded ripple coulters, S/N33461
GRAIN TRUCKS & TRAILERS
1986 IHC S2500 tri-axle grain truck, air lift steerable pusher, L10 Cummins, 7 spd., diff lock, Midland 19′ box & hoist, roll tarp, 3-piece end gate, double framed, 315/80R22.5 tires on Dayton wheels, 11R22.5 tires on Dayton wheels, 255/70R22.5 tires on pusher w/steel buds, S/N1HTZPGBR1GHA52228
Shop-Built tandem axle bumper hitch skid steer loader trailer, ramps, 8-bolt wheels
Shop-Built header trailer, 20′, 4-wheel, on running gear
Shop-Built header trailer, 20′, 4-wheel, 22.5×8-12 tires
GRAVITY WAGONS
Parker 5500 gravity wagon, w/extensions, light kit, brakes, fenders, on Parker running gear, 445/65R22.5 tires
Parker 2600 gravity wagon, w/extensions, on Parker running gear, 425/65R22.5 tires, S/N94308
Parker 2600 gravity wagon, w/extensions, on Parker running gear, 16.5L-16 tires, S/N91445
Parker 2600 gravity wagon, w/extensions, on Parker running gear, 16.5L-16 tires
GRAIN HANDLING EQUIPMENT
2017 Westfield MKX100-83 auger, 83’x10″, 540PTO, low pro swing hopper, low bushels, S/N284631
Westfield MK100-81 auger, 81’x10″, S/N180087
Feterl auger, 60’x10″, 540 PTO, on transport, red, S/N1060RKM096
Feterl auger, 55’x8″, 540 PTO, on transport, S/N855KL104P
Unverferth McCurdy auger, 6″
U-trough auger, 10″, hyd. dump, on transport
Gehl HI-Throw silo blower
LIVESTOCK EQUIPMENT
Meyers 2425 tandem axle manure spreader, 1000 PTO, slop gate, poly floor, 10.00-20 tires, S/N48242501
Wic Inc small square bale grinder, Honda G300 engine, on transport, S/NHLG-11543
(2) Rubbermaid poly water tanks
(4) Shop-Built steer stuffer
Headlock w/shop-built chute, portable
(4) Cattle feeders, wood
(4) Gates, 14′
OTHER FARM EQUIPMENT
Demco pull-type sprayer, Blumhardt 60′ spray boom, 750 gal. tank, 540 PTO pump, tandem wheels
New Idea 5407 disc mower, 7′, 3 pt., 540 PTO, S/N1014828
Balzer 1500 stalk shredder, 6×30″, 1000 PTO, pull type, hyd. lift, 4 gauge wheels, S/N1657090
Flat rack, 1,000 gal poly tank, on Minnesota 6-wheel running gear
Vertical poly tank, 1,500 gal., 2″ fittings, blue
Saddle tanks, 250 gal., MTX mounts
Fuel tank w/hand pump
ATVS
Yamaha 4-wheeler
Kawasaki 360 ATV, 4×4, tune-up May 2020
GENERATOR
Winpower 45/2 5PT2 generator, 45 kw., 1 phase, 540 PTO, on transport, S/N125
PARTS & TIRES
Cultivator parts
Digger parts
(2) Pails of stock chopper parts
(4) Quick hitch
IHC rock box, for IHC 1086
(3) Poly hoppers, for augers
(2) Hyd. cylinders
(2) Transfer pumps w/hoses
(10) IHC suitcase weights & weight bracket
IHC pallet of wheel weights
Disc plates & 12.5L-15 tires
(2) 9.5L-14 tires
(4) 9-bolt dual extensions
MIKE HARMS
Steffes Group, 320.693.9371,
Eric Gabrielson 701.238.2570