Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment. For information contact Russ, 701.640.3655 or Dave Benedict at Steffes Group, 701.238.5062 or 701.237.9173.

FARM RETIREMENT AUCTION

 

LOCATION: From Barney, ND 1/2 mile east on Hwy 13, north side of road, 16305 Hwy 13, Barney, ND 58008     

 

AUCTIONEER’S NOTE: Major equipment begins selling at 10:00 AM. Live online bidding available on major equipment.

 

TRACK TRACTORS

2013 John Deere 9560RT, 18 spd. powershift, 5 hyd., return flow, integrated auto steer, 7″ touch screen, ClimaTrak, HD drawbar, AM/FM/WB, HID lights, beacon, (2) front suitcase weights, approx. 1,000 lb. front idler weights, tow cable, New 36″ tracks, 3,933 hrs., S/N1RW9560RTDP903145

2013 John Deere 8360RT, IVT, CommandView II cab, heated leather, buddy seat, 5 hyd., 3 pt., quick hitch, large 1000 PTO,  integrated auto steer, 7″ touch screen, AM/FM/CD/WB, HID lights, front weight bracket, 16″ tracks, 4,172 hrs., S/N1RW8360RLDD910223

 

UTILITY TRACTOR

1980 John Deere 1050, 8 spd., 540 PTO, 6.00-15 front tires, 13.6-28 rear tires, 3,375 hrs.

 

GPS EQUIPMENT

John Deere 2600 display

John Deere StarFire 3000 receiver, RTK

John Deere StarFire ITC receiver, SF1, 5,731 hrs., S/N535894

John Deere StarFire ITC receiver, SF1, 6,542 hrs., S/N537493

 

COMBINE & TRACKS

2011 John Deere 9870, STS, Contour-Master, bullet rotor, PRWD, ProDrive, 5 spd. feeder house, deluxe controls, integrated auto steer, Y&M, rock trap, high cap. unloading auger, TouchSet, fine cut chopper, 520/85R42 duals, 28L-26 rear tires, 2,069 sep. hrs., 2,890 engine hrs., S/N1H09870SHB0740456

Camoplast AMFIBIOS tracks 36″, for John Deere combine, S/N11101 2013

 

HEADS & HEADER TRAILERS

2004 John Deere 635F HydraFlex, 35′, fore/aft, dividers, finger reel, single pt. hookup, S/NH00635F707014

2012 John Deere 618C StalkMaster chopping corn head, 18×22″, AHH, knife rolls, hyd. deck plates, RowSense, cob saver, single pt. hookup, S/N1H00618CCCC745353

Elmers Mfg single axle header trailer, 30′

Shop-built header trailer

 

GRAIN CART

Parker 935 grain cart, 36″ tracks, 18″ poly-lined unload auger, roll tarp, large 1000 PTO, S/NB19760105

 

PLANTERS

2013 Case-IH 1265 Early Riser planter, 36×22″, central fill system, pneumatic down pressure, floating Yetter trash wheels w/depth bands, liquid in-furrow or over the top, hyd. drive, PTO drive hyd. system, Desmopan Diaphram hyd. drive fertilizer pump, (2) pairs row shut-offs, uses John Deere satellite receiver, on-board air compressor, steerable rear axle, 445 Super Single tires

John Deere 7300 vacuum planter, 16×22″, 3 pt., lift assist, ground drive, MaxEmerge II units, 3 bu. boxes, wing fold, liquid in-furrow

 

TILLAGE EQUIPMENT

2016 Lemken Rubin 12 compact disc harrow, 20′, 29″ front & rear blades, S/N429401

Wil-Rich Quad 5 field cultivator, 48′, floating hitch, 5-section fold, NH3 super cooler, NH3 knives on front, sweeps on rear, 3-bar harrow, rear hitch/winch

Wil-Rich Quad 5 field cultivator, 48′, 5-section fold, knock-on sweeps, gauge wheels, 4-bar harrow, rear hitch

McFarlane WDL-2060 spike tooth harrow, 60′, 3-section rear fold, 16 bars of teeth, S/N16046

Wil-Rich DCIII soil finisher, 35′, 9″ shank space, double spring shanks, front gauge wheels, independent hyd. depth for front discs, 4-bar harrow, rear hitch w/hyd. hookups, walking tandems across, New front disc blades, New main carrier wheels

DMI crumbler, 50′, double fold, adj. front hitch, rear hitch

Summers coil packer, 26′, S/N88862

Wil-Rich 657DCR disc ripper, 36′, 15″ space, individual C-shank disc mounts, 3-bar harrow, 385/65R22.5 Super Single tires

Case-IH 5800 chisel plow, 37′, 12″ space, walking tandems, 3-section fold, 3-bar harrow, rear hitch/winch

White 445 chisel plow, 25′, 12″ space, 3-section fold, gauge wheels, 3-bar harrow

Wil-Rich chisel plow, 38′, 11″ space, 3-section, rear hitch

DMI ripper, 7 shank

2006 Krause 7400 disc, 46′, 23″ wave blades, 5-section fold, walking tandems, rock flex, mud scrapers, 3-bar harrow, rear hitch, S/N1141

Salford 8200 pull-type plow, 6 bottom, 305/70R22.5 tires, S/N120935

Salford 4200 plow, 2 pt., 8 bottom, S/N120936

John Deere 3710 plow, 10 bottom, variable 16″-20″ width, spring reset, spring loaded coulters

John Deere 3700 plow, 12 bottom, 18″-22″ variable width, non-trip

IHC 800 auto reset hinge plow, 11×18″, concave spring-loaded coulters, S/N1050000U001753

(2) IHC 800 auto reset hinge plow, 12×18″, concave spring-loaded coulters, S/N1050000U006101

IHC 800 plow, 9×18″, spring reset, S/N1050000U002591

 

ROW CROP EQUIPMENT

Lilliston row crop cultivator, 24×30″, 2 pt., lift assist, shields, 3-section fold, gauge wheels

Shop-built rotary hoe, 60′, Melroe drag frame, Yetter hardware

 

WHEEL LOADER & ATTACHMENTS

2007 John Deere 544J high lift wheel loader, CAH, 4 spd., diff lock, John Deere 8′ bucket, 20.5R25 tires, 8,504 hrs., S/NDW544JH601716

John Deere payloader bucket

Case backhoe bucket

 

EXCAVATOR, TILING & TRENCHING EQUIPMENT

2006 Case CX210 excavator, CAH, std. boom, mechanical thumb, 60″ smooth edge ditch cleaning bucket, 31.5″ tracks, 5,219 hrs., S/NDAC212618

Soil Max Gold Digger Pro pull-type tile plow, 4″, 6″, 8″, & 10″ boots, 14L-16.1 tires

Wayne tile cart, electric/hyd., hyd. tilt

Trench box, 20′

 

SEMI TRACTORS

2010 IHC ProStar day cab, air ride cab, ISX Cummins, 400 hp., 10 spd. auto shift, engine brake, air ride susp., fixed 5th, diff lock, 2-line wet kit, A/C, power windows & locks, power remote mirrors, cruise, 125 gal. aluminum fuel tank, 70 gal. aluminum hyd. tank, add’l. hyd. returns, 200″ WB, 11R22.5 front tires on aluminum rims, 295/75R22.5 rear tires on steel rims, 467,000 miles 

2005 IHC 9200I tandem axle day cab, ISM Cummins, Eaton 3-pedal auto shift, air ride, wet kit, cruise, jake brake, 179″ WB, 800,127 miles

2006 Sterling tandem axle day cab, 450 Mercedes, 10 spd., engine brake, air ride, air slide, twin aluminum fuel tanks, wet kit, cruise, 11R22.5 tires on steel rims, 413,838 miles

2006 Sterling day cab, Mercedes 450 hp., 10 spd., engine brake, air ride cab & susp., air slide 5th, diff lock, PTO, AM/FM, power remote & heated mirrors, power passenger window, cruise, dual 80 gal. aluminum fuel tanks, Saf-T-Pull, 185″ WB, 11R22.5 front tires on aluminum rims, 11R22.5 rear tires on steel rims, 290,067 miles 

1988 Ford L9000 tandem axle, Cummins, 9 spd., spring ride, diff lock, 2-line wet kit, dual steel fuel tanks, 165″ WB, Saf-T-Pull, 11R22.5 tires on Dayton rims, 395,000 miles, salvage, for parts

1983 Ford 9000 day cab, Cummins, 7 spd., air ride cab, spring ride, diff lock, 2-line wet kit, dual steel fuel tanks, 50 gal. hyd. tank, Saf-T-Pull, rear implement hitch, 145″ WB, 11R22.5 front budd tires, 11R22.5 tires on Dayton rims, 483,000 miles 

 

SEED TENDER & TENDER TRAILER

1998 IHC 4700 single axle seed tender, DT466, automatic, Willmar 10 ton tender, 1,300 gal. poly tank, Briggs & Stratton 8.5 hp. gas motor, Honda GX390 motor w/rotor, lobe blower, roll tarp, 10R22.5 tires, 224,637 miles, S/N519716

Willmar spring ride tandem, 10″ auger, hyd. up/down auger, plastic seed flighting, 16 ton Loadrunner fertilizer tender on container chassis trailer, roll tarp, 10:00-20 tires on Dayton rims

 

SERVICE TRUCK

2003 Chevrolet 3500 flatbed dually service truck, crew cab, leather, 6.0L Vortec, automatic, 4WD, AM/FM, 300 gal. fuel tank, hyd. oil tanks, 168,568 miles

 

HOPPER BOTTOM & PUP TRAILERS

2001 Timpte tandem axle hopper bottom, 42’x96″x68″, air ride, 2 spd. traps, rear air, rear pintle hitch, electric roll tarp, 11R22.5 tires on aluminum rims

2001 Timpte pup hopper bottom, 21’x72″x96″, spring ride, roll tarp, 2 spd. traps, 295/75R22.5 tires on aluminum rims

 

END DUMP & SIDE DUMP TRAILERS

1994 Cobra tri-axle end dump trailer, 36′ aluminum tub, 38′ aluminum frame, air ride, air up/down pusher, roll tarp, grain door, poly liner, oil tank, 11R24.5 tires, outside aluminum & inside steel rims

1997 East tandem axle aluminum end dump trailer, 33’x96″x60″, air ride, rear chute, mud scrapers, 11R24.5 tires on aluminum rims

1986 Fruehauf tandem axle end dump trailer, 33’x96″x60″, spring ride, 10″ SS auger, plumbed for rear auger, hyd. drive, rear grain chute, mud scrapers, roll tarp, 11R24.5 tires on steel rims

Summit AD26 tandem axle aluminum end dump trailer, 26’x96″x38″, spring ride, roll tarp

Trailstar tri-axle aluminum end dump trailer, 36’x96″x60″, spring ride, roll tarp, 11R24.5 tires on steel rims

1979 Wilson tandem axle side dump flatbed trailer, 42’x96″x54″, spring ride, poly floor, mud scrapers, 11R24.5 tires

 

OTHER TRAILERS

1965 TTT-R tri-axle flatbed trailer, 30’x10’x2′ dovetail, flip-up ramps, 8.25R15 tires

Shop-built flatbed trailer, 19′, 30″ dovetail, flip-up ramps, steel deck, mobile home axles, 2-5/16″ ball hitch, jack, 9×14.5 tires

1973 Timpte van body, 46’, fixed spring ride tandem, roll-up door, 11R22.5 tires, Dayton rims

 

SUGAR BEET EQUIPMENT

2011 Amity 2700 sugar beet harvester, 12×22″, scrub chain, 5/8″ roll belted bed chain, rock struts (have cushion, but not installed), auto leveling, factory row finder, Lincoln auto greaser for hitch, 500 acres on New 4-belt truck conveyor chain, New conveyor & elevator drive sprockets, rear grab rolls set up as transfer rolls, 710/70R38 tires, field ready, S/N700747

Amity 3750 sugarbeet defoliator, 12×22″, front cup & L-knives, 2-rows rubber flails, hyd. ROPS, rear steer w/row finder, LED lights, gauge wheels, large 1000 CV PTO, S/N701598

Alloway Topmaster sugar beet defoliator, 12×22″, front L-knives, 2-rows rubber flails, large 1000 CV PTO, 7.6-15 tires, manual struts, S/N23337

Alloway Topmaster sugar beet defoliator, 8×30″, front gauge wheels, CV 1000 PTO driveshaft, S/N19085

Red River sugar beet defoliator, 6×30″, 1000 PTO, belt drive

 

SPRAYERS

Top Air 2400 sprayer, 132′ boom, 2,400 gal. poly tank, approx. 200 gal. rinse tank, 6-section, triple nozzle bodies, Raven controls, auto boom height, wing gauge wheels, 14″ tracks, S/NB25290107

Keller Welding Mfg. pull-type sprayer, 132′, dual system, 1,000 gal. fiberglass tank, Hypro hyd. pump, 3-section rear fold, 4-section shut-off

Alloway band sprayer, 66’, 36x22″, 3 pt., Hypro hyd. pump, broadcast nozzles, 5-section

Flexi-Coil 62 sprayer, 120′ booms, 1,000 gal. tank, no pump, no controls

 

FERTILIZER SPREADERS

(2) Mobility 800 fertilizer spreaders, ground drive belt, hyd. tailboard spreaders, roll tarp, 380/90R46 tires, S/N141349, SN141350

1989 Loral 4900 fertilizer spreader, Easy Rider IHC chassis, DT466, Allison automatic, 60′ boom, vertical fertilizer auger, S/N234759

 

CHEMICAL/FERTILIZER & NH3 EQUIPMENT

Redball Strip tiller, 12×30″, 3 pt., Redball row units, vertical fold, front gauge wheels

Keller sprayer caddy, Riverbend 1,000 gal. fiberglass tank, Hypro hyd. pump, sprayer system valves, flow meter

Pleasure Products liquid caddy, 1,200 gal. tank, 120″ wheel spacing, rear hitch

Shop-built side dresser, 60′ double fold, 3 pt., 12 row units, front gauge wheels

(2) Lakestate Mfg. 500 gal. saddle tanks, John Deere 8000RT mounts

(2) Big John 500 gal. saddle tanks, 2-circuit Hypro centrifugal pump, Raven flow control, for 9000 Series RT tractors

1,800 gal. poly saddle tanks w/brackets, off 8360RT

NH3 Super Cooler

 

GRAIN HANDLING EQUIPMENT

Kwik Kleen grain cleaner, 7-tube, corn tubes, 10 hp. electric motor

Brandt 5000EX grain vac, asst. 7″ flexible tubing, cleanup kit, 1000 PTO

Batco flat conveyor, 50’x13″, 10 hp., 1 phase, 230v, S/N1258

SS conveyor, 36′, 24″ belt, 10 hp. electric motor

 

OTHER EQUIPMENT

Summers 700 hyd. reel-type rockpicker B0404

Allis Chalmers 260 scraper, direct mount conversion, mounts to John Deere std. ag drawbar, hyd. mast, hyd. push-off, hyd./cable front door, 17 yd., bolt-on cutting edge

Brown box blade, 10′, hyd. up/down, jack stand

Hurricane 24W1000 ditch spinner, 36″ wheel, hyd. deflector, drawbar pull, large 1000 PTO

Kato generator, diesel, 250 kw, 139/240v, 3 phase, Allis Chalmers 25000 diesel motor, circuit breaker boxes, on pintle hitch single axle trailer, 9.00-20 tires

Kirchner swath fluffer

Case forklift mast, 28′, 5,000 lb.

Rust Sales laser tower cart, S/N03005

Farm King mower deck, 64″, 3 pt., 540 PTO

Kringstad Ironworks Saf-T-Pull, bull pull, cable & springs

Shop-built Saf-T-Pull, cable & springs

 

MANURE SPREADERS

Calumet 2250 V-2250 vac tank, small 1000 PTO vacuum pump, rear dump valve, walking tandems, 16.5-16.1SL tires, S/N93-7238

Kuhn Knight 2054 heavy vertical beater manure spreader, poly floor & sides, hyd. push feed, large 1000 PTO

Warren spreader, 16′, hyd. drive slat chain, dual spinner, box vibrator, 42×25.00-20 tires

 

POLY TANKS

Ace Roto Mold 1,500 gal. poly tank, 3″ Banjo valve

2,000 gal. elliptical poly tank, 2″ & 3″ Banjo valves  

2,000 gal. elliptical poly tank, 2″ & 3″ Banjo valves  

 

PARTS & FARM SUPPORT EQUIPMENT

(5) good bogie wheels, 3 cores, for John Deere 8020RT

(2) side weight brackets, for John Deere 8000RT

Rock box, for John Deere 8000 Series

Chisel plow shanks

Lowry hopper bin converted to screening tub, bottom removed

Shivvers 689B27 centrifugal fan, 30 hp., 3 phase, Blue Flame Max LP burner, 7 million BTU, S/N691AG

Misc. grain handling equipment/parts, electric motors, grain pump head conveyor parts, unions, couplers

Concrete blocks, barriers

 

RCM FAMILY LLLP

Russ, 701.640.3655

or Dave Benedict at Steffes Group, 701.237.9173 or 701. 238-5062

Photo Gallery