The preview will be December 1-19 from 8AM-5PM and loadout is December 20-23 from 8AM-5PM. No loading on December 24 or 25. After December 25, by appointment only. For information contact Dominic, 701.370.8370 or Terry, 701.370.8.349 or from Steffes Group, Dave Krostue 218.791.1180, 701.203.8400 or Gregg Holte, 218.790.1705.

TIMED ONLINE AUCTION

Location:  305 Sawyer St., Sarles, ND 58372 

OPENS:  THURSDAY, DECEMBER 12

CLOSES:  THURSDAY, DECEMBER 19

PREVIEW:  December 1 – 19 from 8:00AM-5:00PM.

LOADOUT:  December 20 – 23 from 8:00 AM – 5:00 PM.  No loading on December 24 or 25.  After December 25, by appointment only, contact Dominic, 701.370.8370 or Terry 701.370.8349.

4WD TRACTORS

1996 New Holland 9882, N14 Cummins, 12 spd., 4 hyd., return flow, Trimble auto steer, LED lights, 20.8R42 triples, 5,200 hrs., S/N unreadable, New engine 360 hrs. ago, New transmission 1,600 hrs. ago, work orders for complete details  

1982 Versatile 935, 903 Cummins, 12 spd., 4 hyd., 20.8-38 duals, shows 3,668 hrs., runs and drives, S/N72709

1973 IHC 4366, 903 Cummins, 10 spd., 3 hyd., 18.4-38 duals, shows 3,986 hrs., runs and drives but will not start with starter, S/N297000TU009118

John Deere 7520, CAH, 8 spd. w/Hi-Lo, 3 hyd., 540/1000 PTO, front & rear weights, 24.5-32 duals, shows 11,383 hrs., not running

 

2WD TRACTORS & LOADER

Case 930 Comfort King, Standard, cab, diesel, 6 spd., 2 hyd., 10:00-16 front tires, 22.1-32 rear singles

1972 John Deere 4320, CAH, diesel, syncro, 2 hyd., aftermarket 3 pt., 540/1000 PTO, LED lights, Allied 795 loader, 84″ bucket w/5-tine grapple, joystick, grill guard, 11L-16 front tires, 20.8-38 singles, shows 1,767 hrs., S/NT613A0020461

John Deere 4020 Standard, 2 hyd., 540/1000 PTO, front fuel tank, 23.1-30 singles, no serial number tag, runs but hole in crank case

 

COMBINES

1997 Gleaner R72, hydro w/4 spd., hopper ext., buddy seat, grain loss monitor, fore/aft control, Bison rotor w/New bars, Michelin 900/60R35 front tires, 16.9-24 rear tires, 2,747 sep. hrs., 3,593 engine hrs., New rotor gear box, New concaves, rebuilt trans., New feeder chain, New elevator chains, work orders available, S/N7277049

1983 Gleaner N7, hydro, grain loss monitor, 30.5-32 drive tires, 16.9-24 rear tires, broken feeder chain shaft, electrical problem in cab, hrs. unavailable, S/N7603622H83

1978 Gleaner L2, hydro, chopper, grain loss monitor, 30.5-32 drive tires, runs, S/NL-16208

 

HEADS

2006 MacDon draper head, 36′, rigid, finger reel, fore/aft, slow speed transport, 2008 Gleaner mounts, S/N70813

1999 Gleaner 800 flex head, 30′, Crary air reel, fore/aft, 3″ cut, S/N81003

2001 Gleaner 700 rigid head, 30′, fore/aft, bat reel, 3″ cut, S/NHK84145

Gleaner rigid head w/Sund pickup, S/NP1331118P9090

Gleaner rigid head, 24′, 3″ cut, bat reel

Gleaner rigid head, 27′, Lucke sunflower attachment, 12″ pans

1983 Gleaner 313 pickup head, 13′, Melroe 388 8-belt pickup, S/NN-P11289F-83

1983 Gleaner 313 pickup head, 13′, Swathmaster pickup, S/NN-P08342F

 

HEADER TRAILERS

Bison tri-axle double header trailer, hyd. brakes, lights, 2-5/16″ ball hitch, 8:00R16 tires, No title

Horst CHC header trailer, 30′, flex bar, 4-wheel, wide front axle, 225/75R15 tires  

 

GRAIN CART

A&L 850S grain cart, 850 bu., hyd. drive & 1000 PTO, 16″ front auger, roll tarp, 30.5-32 tires

 

SWATHERS

John Deere 590 pull-type swather, 30′, auto fold, drapers, bat reel, 1000 PTO

Versatile 400 self-propelled swather, Ford 6 cyl. gas engine, 20′, hydro, swath opening widened and rear wheel moved for canola swathing, owner states governor bad

 

AIR DRILLS

Flexi-Coil 5000 air seeder, 57′, hoe, carbon-tipped eagle beak openers, harrow bar levelers, steel press wheels, liquid fert. attachments (no tank), hyd. drive pump, 2320 tow-behind 2-compartment air cart, 230 bu., hyd. fan, hyd. drill fill auger, 16.5-16 front tires, 23.1-26 rear tires, S/NADB0000-9070788

John Deere 787 air drill, 730 seeding tool, 2-bar harrow, rubber press, Haukaas sidearm markers, walking tandems, gauge wheels, 9.5L-15 tires, tow-between 2-compartment cart, hyd. fan, hyd. drill fill auger, 23.1-26 tires, single season on New disks

 

TILLAGE EQUIPMENT

Bourgault 9200 chisel plow, 48′, Summers 106 4-bar harrow, 12″ spacing, NH3 attachment w/Super Cooler, sweeps, 11L15 tires

Geisler chisel plow, 36′, 12″ space, cable lift

Geisler chisel plow, 33′, 12″ space, IH shanks, NH3

Glencoe chisel plow, 25′, 12″ spacing, Summers 3-bar harrow, NH3 attachments

Degelman 3255 heavy duty harrow, 70′, Valmar Air Flow granular applicator, New 16.5-16 tires on main frame

Sunflower 1234-32 tandem disk, 32′, rock cushion, blades approximately 20″, scrapers, S/N01234E20020011

IHC 45 vibrashank field cultivator, 28′, walking tandems, rear hitch

John Deere pull-type plow, 8×16”, hyd. reset, gauge wheels, broken beam

Melroe 903 pull-type plow, 8×16″, spring reset

1994 H&S row crop cultivator, 12×30″, hyd. folding bar, danish tines, tunnel shields, lift assist

 

SEMI TRACTOR & TRUCKS

1984 Ford L9000, day cab, Cummins, 275 hp., 9 spd., spring ride, sliding 5th wheel, wet kit, full fenders, tandem 11R24.5 tires on steel, aluminum front rims, shows 280,291 miles

1976 IHC Transtar tandem twin screw, cabover, 400 Cummins, 10 spd., spring ride, Knapheide 20-1/2′ box, hoist, roll tarp, 3 pc. fold-out end gate, steel floor, New front shocks and springs on front axle, New spring shackles on rear tires, 10:00-20 tires, shows 506,876 miles

1977 GMC C6500 single axle, 427, 5&2 spd., 15′ box, roll tarp, 11R22.5 tires, hoist needs work, mileage unknown

1976 Chevrolet C65 single axle, V8, 5&2 spd., 15′ box, hoist, 9:00-20 tires

1969 IHC CO1600 single axle cabover, V8 gas, 5&2 spd., spring ride, 13-1/2′ box, roll tarp, 9:00-20 front tires, 10:00-20 rear tires, mileage unknown, runs and drives

 

TRAILERS

1988 Merritt tandem axle hopper bottom, 42’x96″x66″, spring ride, 20″ hopper clearance, roll tarp, 2 spd. traps, 11R24.5 tires, New brakes and slack adjusters

1979 Chamberlain JAGH-500 tandem axle hopper bottom, 43’x96″x66″, spring ride, 20″ hopper clearance, roll tarp, 2 spd. traps, 11R24.5 tires, New slack adjusters

Wabash tandem axle van trailer, 36’x96″x96″, spring ride, steel floor, roll-up rear door, side door, rear ladder, lights, (3) 1,550 gal. poly tanks, 2″ fill, Honda 2″ pump, 30 gal. mix cone, 11R24.5 tires on steel, No title, Bill of Sale only

Lowboy tandem axle step deck trailer, 23’x96″, 40″ beavertail, 8.25R15 tires, No title, parts only

 

SELF-PROPELLED SPRAYERS & PULL-TYPE SPREADER

2004 Case IH SPX4410 self-propelled sprayer, 90′, 20″ spacing, AIM Command, 1,200 gal. stainless steel tank, auto boom height, 5-section control, integrated auto steer, hyd. tread adj., fence line nozzles, Outback S3 w/Automate, Raven SCS460 autorate controller, fenders, 320/90R46 tires, shows 2,762 hrs., S/NJFG0006380

Melroe 103 Spra-Coupe self-propelled sprayer, 50′, VW engine, 130 gal. tank

TCI tandem axle fertilizer spreader, 40′ spread, 4 ton, twin spinners, stainless steel box and bed chain, tarp, 540 PTO, 11L-15 tires

 

HOPPER BIN & GRAIN HANDLING EQUIPMENT

Lowry portable hopper bin, 1,000 bu., roof, auger not included

M&W continuous flow grain dryer, propane, 250 bu./hr., 540 PTO, fill auger

Kwik Kleen seed cleaner, 5 tube, multiple screens, 230v motor, 1 phase

Brent 5000 grain vac, cleanup kit, hyd. folding auger, 1000 PTO, S/N74958

Farm King 1080 auger, 80’x10″, low pro swing hopper, hyd. hopper mover, 540 PTO

Sakundiak HD7-46 auger, 46’x7″, Briggs & Stratton 23 hp. engine, electric start

Farm King auger, 31’x8″, Wisconsin engine, electric start, manual lift

GT auger, 32’x6″, 7.5 hp. motor, 230v, 1 phase

 

ROCKPICKERS

Crown fork-style rockpicker, hyd. dump, S/N1384

Degelman R5708 reel-type rockpicker, ground drive, S/N7779

Shop-built heavy duty fork-style rockpicker, hyd. dump

 

OTHER EQUIPMENT

Ashland 60D scraper, 6 yd., hyd. dump, S/N12225

Farm King 960 snowblower, 3 pt., 2 stage, hyd. rotating spout, 540 PTO, S/N20400571

Shop-built swather transport

Canola swath roller, poly

Backhoe, 3 pt., 14″ dirt bucket w/hyd. controls

 

FARM SUPPORT ITEMS & PARTS

Fuel tank, approx. 12,000 gal., bottom valve, to be removed

Fuel tank, approx. 10,000 gal., bottom valve, to be removed

Fuel tank, approx. 10,000 gal., bottom valve, to be removed

Fuel tank, approx. 2,000 gal., on stand, to be removed

Gleaner bat reel, 27′

John Deere engine for 4020, running order

Finger reel, 24′, Gleaner mounts

Pallet used heavy harrow teeth, 9/16″, 17-20″ long

Misc. parts

 

D & T MURPHY FARMS

Dominic, 701.370.8370, or Terry, 701.370.8349

or Dave Krostue at Steffes Group, 218.779.6865, 701.203.8400,

or Gregg Holte at Steffes Group, 218.790.1705

---

Photo Gallery