LARGE MULTI PARTY FARM EQUIPMENT AUCTION

 

Friday, April 10th – 2015 – 9:30am

 

Location: Leeds, ND – 1 mile west of Leeds, ND on the south side of Hwy 2

 

CONSISTENTLY NORTH CENTRAL DAKOTA’S LARGEST FARM EQUIPMENT AUCTION

 

COME PREPARED TO BUY AT TWO RINGS

9. David Teigen – Rugby, ND – 701-208-1254

– Bourgault 9820 no till NH3 anhydrous applicator, 12" spacing, discs & scrapers excellent, 40' wide, newer excellent unit, extra weight package

 

10. John Deplazes – Cando, ND – (Phil: 701-303-0506)

– 1952 Model W4 Super, professionally painted two years ago, new front tires, rears good, mechanically sound, runs perfect, serial # WBH31353W1

 

11. Tim Krueger – Egeland, ND – 701-230-1821

– 1950 DC4 Case row crop model tractor, serial# 5411270DC, uncle bought new, original paint, always stored inside, belt pulley, near new 13.6×38 rear tires, 6.50×16 front, engine was re-ringed and head work done a few years ago, changed to 12 volt lights and alternator, have original generator, excellent running condition, single factory hydraulics

– 1948 DC4 Case tractor, serial# 5217201DC, uncle bought new, hood and tank repainted, put new sleeves and pistons, head work, radiator cleaned a few years ago along with new rear tires 13.6×38, fronts are weather checked 6.00×15, has live, single hydraulics, pump mounted on front of frame and connected to crank shaft pulley, excellent condition   

– 1962 TD 340 Crawler tractor, diesel, serial# TD340A5723, 6 way hydraulic dozer, has full cage, engine has been overhauled, new seals in lift cylinders, track rollers repaired, front idlers have new shafts, bushings, seals, 14” wide tracks, duel rear hydraulics, have some extra seals, have operator’s manual and repair manuals

– Truck frame made into trailer with 5’x8’ flat bed for storage in the center and (2) 300 gallon tanks, one on each end, one with 120V pump, 20’ long frame, from axle has 6’ long pole for hitching up

– Pickup box trailer made out of 1948 IHC step side with lights and spare, 2 5/16” ball hitch, box inside measures 4’8”X6’6”, 700×15-6 ply tires

 

12. Walden Schmidt – Bisbee, ND – 701-261-6717

– 32’ Flexicoil air seeder, 5000 tool, 2320 tanks

– 63’ Summers 5 bar harrow, double cylinders on front, newer style

– 28’ JD model 610 chisel w/ 3 bar harrows

– 145 Versatile 4wd tractor

– 45×8 Brandt 845 auger w/ 220 elec. motor

– 7×51 Westfield auger w/ 220 elec. motor

– Sakundiak auger, aprox 27’x7” w/ 220 elec. motor

– 1979 835 Versatile tractor, 5 hyd., extra pump for air seeder, brand new 18.4 38 radial duals, 7514 hrs

– 750 Versatile, 3 hyd, 18.4 38s tires, 10,489 hrs

 

13. Tri S Farms, (Wayne Slaubaugh & Denton Slaubaugh) – Wolford, ND – 701-771-2408, 701-771-0163

– 2010 70’ Brandt heavy harrow, 5/8” chrome tipped teeth, little wear, like new

 

14. Greg Graber – Wolford, ND – 701-583-2271

– (3) 1000 gal NH3 tanks w/ running gear

– 10”x60’ Westfield P.T.O. grain auger w/ mechanical drive swing out hopper

 

15. Owen Goeser – Devils Lake, ND – 701-370-2221

– 30’ drill transport, drive on unit, also works for header trailer (has brackets)

 

16. Lane Parker – Cando, ND – 701-799-6242

– Kenzie 16 row planter

-45’ Wil-Rich field cultivator

– 2000 Polaris 4×4 Sportsman four-wheeler, approx. 1700 miles with snow blade

– 1998 Polaris 4×4 Xplorer four-wheeler, approx. 9500 miles    

– Electric roll tarp for combine

 

17. Lamar Martz – Cando, ND – 701-370-1023

– 1993 JD 4wd  8760 tractor, 20.8 38’s (original), 4 hyd, 24 speed quad, 4,839 hrs

– 1993 Case IH 1688 combine, includes 30’ 1020 Case IH flex head w/ finger reel & also Case IH pickup head, 4,739 engine hrs.

– 1993 Flexicoil 33’ air seeder, 1720 tank, 5000 seeding tool, extra fine & fine rollers, 5” sweeps, nice drill

– 30’ Donahue trailer

– 1979 Chev tandem truck, lift tag, 366, engine has 5,000 miles, complete rebuild, roll tarp, 5+2, swing out gate, 80,103 total miles

– 60’ Herman harrow 5 bar, excellent teeth (heavier duty harrow but not super harrow)

– 600 bushel Brandt gravity wagon, roll tarp, side or center dump

– 35’x7” Westfield auger w/ Honda engine

– Nuero grain vac. (good)  

– 38’ Wilrich field cultivator, complete walking tandems 3 bar harrow

– 27’ Morris Magnum chisel plow, inside tandems, 3 bar harrows

– 8”x61’ Westfield P.T.O auger w/ mechanical hopper

– 25’ Case IH model 725 pull type swather w/ finger reel & transport

– 40’ Summers 3pt sprayer converted to pull type, hyd. pump, 500 gallon tank

– Swath roller

 

18. Artie Banko – Maddock, ND – 701-341-7649

– 1952 AR JD tractor, new front rubber, new exhaust, good paint, good decals, fresh tune-up

– 1939 B JD tractor, good rubber, newer paint, new decals, new gauges, rebuilt magneto, rebuilt carburetor, new steering wheel, new front wheels, fenders

– 1949 M JD tractor, new rubber, rebuilt starter, generator & carburetor, new seat cushion, new battery, all systems have been gone through, new gauges, major overhauled engine

– 1941 D Case tractor, new decals, new paint, new gauges, 12 V system, rebuilt generator, rebuilt starter, rebuilt carburetor, new 12V battery, new steering wheel, new rubber, rebuilt magneto

– 1952 R JD tractor, new custom paint, new rubber, new gauges, new steering wheel, new decals, new exhaust, starter motor runs great, rebuilt carburetor on starter motor

– 1952 M International, bought new, new paint, new rubber, new battery, new decals, 560 International fenders, new gauges, new muffler, new tune-up, new steering wheel, new starter

– 2014 18’ PJ car hauler trailer with ramps, 5,200 lbs. axles, less than 500 miles

– Case 210 garden tractor, rebuilt 10HP Kohler, rebuilt carburetor, new battery, new belts, new muffler, fresh tune-up

 

19. Gary Larson – Leeds, ND – 701-740-7309

– 1986 diesel tandem GMC General grain truck w/ Rugby box, swing out gate, brand new roll tarp, 9 speed, twin screw, engine problems  

 

20. Glen Slaubaugh – Rugby, ND – 701-771-0079

– 1992 38’ Summers Diamond disk w/ back center harrow

– JD 843 8 row corn head w/ transport

 

21. Jay Estvold – Lakota, ND – 701-270-1080

– 1061 Westfield swing away auger

 

22. Bill Stone – Knox, ND – 701-208-0308

– 16’ New Holland model 116 hay bine, decent shape, new tires, new sickle, extended hitch, has owner manual, extended hitch, has owner manual

 

23. Darrell Odegaard – Egeland, ND – 701-230-1613

– 44 ½’ JD model 960 field cultivator w/ knock-ons, Morris harrows w/ new teeth, all new rubber   

– 41’ JD model 1610 chisel plow w/ harrows, excellent chisel, worn harrows

 

24. Mike Peterson – Dunseith, ND – 701-263-1832

– Hesston 8100 hay conditioner self-propelled, 16’ hay head

– 60” Swisher pull behind lawn mower

 

25. Alois (Sonny) Schmidhammer – Cando, ND – 701-968-3802

– 1980 Versatile series II 4wd tractor, 20.8 38 tires (approx. 40%), plumbed for air seeder, bottom end recently done, 10,400 total hrs, excellent tractor, strong maintenance history, doesn’t use oil, etc.

– 45’ WilRich field cultivator, 3 bar harrows, complete walking tandems, nice shape

 

26. Eric Jorgenson – Leeds, ND – 701-739-6189 or 701-466-2739

– 2002 JD 930 F 30’ flex head w/ finger reel, serial# 696457, used on 50 series combine

– Wilmar model 500 fertilizer spreader, 5 ton, 40’ spread, P.T.O. drive, tarp, twin beaters, tandem axle, flotation tires, super clean & shedded

– 1994 Ford F-150 4wd XLT pickup, reg cab, long box, good a/c, most all options, nice pickup

– 36’ header trailer, deluxe model, tandem dually front, also duals in back, 4 post

– 30’ Mollers flex header trailer

 

27. Jason Martodam – Leeds, ND – 701-550-0562

– JD 7200 Maxemerge planter, 16 row 30” spacing, conservation model (includes trash whipper & row cutting coulter), corn, soybean & edible bean plates

– 10×70 Westfield auger, P.T.O. driven w/ swing out

– 8×60 PTO auger w/ hydraulic swing out

– (2) 250 gal liquid fertilizer saddle tanks, fit any mechanical front JD

– 30’ set of JD 9350 grain drills w/ trans. (3 10’ sections combined)

– (2) fertilizer tanks

– 25’ Massey Ferguson pull type swather

 

28. Larry Muffenbier – Rugby, ND – 701-542-3381 or 701-771-8768

– #37 JD mower, trailer type, 7’ bar, decent cond.

– (2) propane bin heaters

– (2) new inside bin drag augers

– (42) dutch openers, 3” spread, center NH3, off of Morris edge on shank

 

29. John Fjellanger – Rugby, ND – 701-542-3233 or 701-208-0506

– 1995 39’ Flexicoil 5000 air seeder, 7.2 in. spacing, 1720 tow-between air tank, new drill fill & manifolds a year ago, carbide tipped eagle breaks, has monitor & books

 

30. Ed Hein – Rollete, ND – 701-550-7559

– JD 914N 6 belt pickup head w/ big tires, wind guard & lights, nice shape

– JD 912B 6 belt pickup head, big tires, wind guard, nice shape

– JD pickup belts

 

31. Ken Hoffert – Rugby, ND – 701-771-2311 or 701-583-2816

– 1993 1688 Case IH combine, AFX rotor, heavy duty cone, auto header height control, fore and aft control, 3 sets concaves, has hopper ext. tip tops, 30.5 L32’s on front (35%) 14.9 24’s on back (60%), 4332 hrs., completely gone through in 2013 (engine & combine repairs $15,000 in work), about 110 hrs on repair, excellent machine

– 6 belt Case IH pickup head

– 1010 25’ Case IH flex head w/ finger reel, fore & aft Schuler cutting system, on a four wheel homemade trailer

– 1981 Chevy pickup, 4 speed, 350 rebuilt engine w/ about 5,000 miles

– Microtrack anhydrous system for cultivator/ seeder, has hoses, manifolds, controller, monitor, 45 Lang knives     

 

32. Rick Woodrow – Munich, ND – 701-682-5109

– 45’ Flexicoil 2320 air seeder, 5000 seeding tool, 9” space, tow between tank, 1” carbide Bourgault knock-on tips, works well, complete w/ monitor, had updates

– 45’ JD 787 air seeder, 1060 seeding tool, tow between tank, newer shovels, field ready, low acres, run blockage sensors on all runs

 

33. Travis Johnson – Mandan, ND – 701-527-3472

– Steiger Bearcat ST225 4wd tractor, 4 hyd, equipped w/ 14’ adjustable angle dozer, 20.8 34 duals (40%), good running tractor

 

34. Roger Kenner – Leeds, ND

– 1981 Chevy tandem twin screw grain truck, twin saddle tanks, swing out gate, Eaton 5+2 trans, 427, roll tarp, 69,200 miles, highly maintained, excellent truck, stored inside

– 1976 GMC 6500 tandem grain truck, lift tag, saddle tank, 5+2, 366, highly maintained, original red paint, roll tarp, 57,500 miles, excellent cond., always shedded

– 1979 Ford F-800 tandem grain truck, Eaton 5+2 trans., 475 V8, complete swing out gate, twin screw, roll tarp, twin saddle tanks, tilt back hood, 102,000 miles, excellent cond., shedded

– Ford single axle flatbed truck, equipped for hauling bales, 4+2, V8 gas engine, straight, clean, engine weak

– Case 8220 25’ pull type swather w/ finger reel, canolla cutter on one side, excellent condition, low acres, always shedded

 

35. Ron Schill – Langdon, ND – 701-256-5215 or 701-305-0411

– 1966 JD 4020 diesel 2wd tractor, 18.4 34’s, heavy duty rims, tires very good, cab, 8 speed Syncro w/58 JD loader w/ grapple, new batteries, runs good

– JD 510 round baler, all new belts & bearings, nice shape

– JD model 400 grinder mixer, new gear box, brand new fingers one side, magnetic

– 42’ heavy duty summers multiweeder

– 53’ Herman harrow w/ good teeth, flotation front tires

– (3) 224 straight heads, 2 rigid, one standard, 2 have finger reels

– 8”x80’ Westfield P.T.O. auger

– 25’ Premier model 1900 pull type swather w/ finger reel

– 21’ JD model 2320 swather, new knife & finger reel, has cab w/ ac & heat, fresh engine and radiator, nice shape, shedded

 

36. Doug Anderson – Leeds, ND – 701-466-2360

– Neuero grain vaculator

      

37. Dallas Hager – Rugby, ND – 701-720-9140

– 1998 HoneyBee SP36, 36' draper header w/split bat reel, JD adapter, gauge wheels, removable transport, cross auger, straight cutting bar, Hyd drive, single sickle

 

38. Nyle Myhre – Sheyenne, ND – 701-996-2654

– Degelman reel type rock picker, ground driven, rebuilt reel, new tires

 

39. Paul Grann – Perth, ND – 701-477-4523

– Late model Wishek rock picker, prong type, heavy duty model

– Dual loader smaller loader w/ good P.T.O. pump

 

40. Steve Stenson – Rock Lake, ND – 701-382-9615

– 390 Bu. Killbros gravity wagon w/ roll tarp   

– JD 914 7 belt pickup head w/ 50 series hook-ups

– Case IH model 8230 30’ pull type swather w/ finger reel

 

41. Gerald Stenson – Rock Lake, ND – 701-382-9616

– JD model 610 29’ chisel plow w/ 3 bar Summers harrow

– JD 6×18’s model 3600 auto reset plow

– 20’ heavy duty Miller tandem disk w/ new front blades

 

42. Smith Equipment Consolidated – Knapp, WI – 715-665-2000

– Unused Lowe hyd. auger 1650ch w/ 9 in & 12 in & 18 in w/ skid steer quick attach

– Unused Lowe hyd. auger 750ch w/ 9 in & 12 in & 15 in w/ skid steer quick attach

– Unused Stout brush grapple HD72-4 close-tine w/ skid steer quick attach

– Unused Stout brush grapple XHD84-6 w/ skid steer quick attach

– Unused Stout rock bucket grapple HD72-3 w/ skid steer quick attach

– Unused Stout rock bucket/brush grapple combo HD72-3 open-end w/ q-tach

– Unused Stout material bucket 84 w/ double cut-edge w/ skid steer quick attach

– Unused Stout stump bucket w/ skid steer quick attach

– Unused Stout tree & post puller w/ skid steer quick attach

– Unused Stout receiver hitch plate

– Unused Stout regular weld-on skid steer plate

– Unused Stout solid weld-on skid steer plate

– Unused Stout walk-through pallet forks 48 in. w/ skid steer quick attach

– Unused Stout full-back pallet forks 48 in. w/ skid steer quick attach

– Unused pallet forks 48 in. w/ skid steer quick attach

– Unused (4 tires sell as one lot) 12-16.5/F Forerunner SKS-1 skid steer tire 12-ply with rim guard, super traction, high stability

 

43. Mike Olson – Mcville, ND – 701-230-9795

– Tandem axle semi-trailer caddy, 5th wheel plate on top, heavy duty pintle hitch on back, 275/80R 22.5’s tires

– Tandem axle heavy duty implement trailer, pintle hitch, tractor hydraulic jack lift system, 10.00-20 tires

– 230 V 7.5 HP Caldwell bin aeration fan

 

44. Kent Swenson – Lakota, ND – 701-247-3030

– 1998 Case IH 8920 Magnum tractor, duals, front weights, 3pt, dual P.T.O., 16,300 hrs

– 1993 Case IH 7220 Magnum tractor, duals, dual loader, grapple fork, 3pt, dual P.T.O., 15,695 hrs

– 2006 S185 Bobcat, cab w/ heat, turbo, high flow, 6550 hrs

 

45. Roy Kenner – Devils Lake, ND – 701-351-1013

– (2) JD corn head stalk stompers

– Full set chopper hammers for 9600 combine new in plastic

– (100) used chisel plow sweeps, nice shape

– 4 new Summers super Coulter disk blades

– Wedge kit for 9650 combine

– JD combine hopper parts

– Slowdown bean kit for JD 9600 combine

– (2) hitches for towing a pickup

– JD 1770 planter parts

– Leon reel type rock picker, needs work

– Upright battery charger with wheels

 

46. Henderson AG – Hansboro, ND – 701-266-5344

– Big Mac prong type rock picker, heavy duty unit

 

47. Conrad Rostvet – Park River, ND – 701-360-1866

– JD model 1610 33’ chisel plow, 2 bar harrow, complete walking tandems, rebuilt shanks, nice cond. single pt, depth control

– JD 1100 26’ 3pt field cultivator, folding wings

 

48. Kip Harmel – Rugby, ND – 701-208-0850 & 701-776-5573

– JD 9500 combine, 5400 engine hrs & 3891 sep. hrs, shedded

– JD 924 rigid header w/ finger reel

– JD 653 A all-crop header

– JD 4230 tractor w/ JD 148 loader, grapple fork and independent valve controller, quad range trans., 3pt, hitch, 3 hyd., 18.4 38’s tires, has  

 

49. Jason Marchus – Wolford, ND – 701-351-2357

– 1997 Hillsboro gooseneck flatbed trailer w/ (2) 10,000 lbs axles, 28’ beaver tail

 

50. Des McIntyre – Leeds, ND – 701-230-1026

– 1988 Kenworth T600 day cab semi w/ 400 Cummins engine

– JD 4430 tractor, power shift, 20.8×38 tires, new hyd. pump, new radiator, new trans, new HR meter, less than 9000 hrs

– JD 8430 tractor, 9700 hrs

– JD 4020 tractor, 500 hrs on new motor and trans., has power shift

– 8 wheel rake

 

51. Kent Hejlik – Lakota, ND – 701-739-7972

– Leon model 3000 hyd. drive rock picker

– Tayler way 15’ rotary mower

– JD 590 25’ swather w/ finger reel

– 1974 Ford tandem truck, (2) 1500 gal water tanks w/ pump

 

52. Tim Kraft – St. Michael, ND – 701-351-5060

– 1965 Ford truck, V8, 4+2, flatbed w/ bale rack, holds 8 rounds bales

 

53. Louis Schaefer – New Rockford, ND – 701-302-0342 or 701-947-5852

– (2) 25’Case IH windrowers model 8220 pull-type swather, always shedded

– Large canola roller

– Leon 8’ dozer, mounts on 4430 or 4630 JD tractor

– 1976 2wd Ford pickup w/ hyd. soil probe mounted in cab (motor approx. 8,000 – 9,000 miles on complete overhaul)

– 30’ flat fold rotary hoe, 3pt hitch hookup

– 25’ JD pull-type swather, 85 series, one season on canvases

– 1974 Case belt driven skid steer, dirt scoop & manure bucket w/ grapple

– Super reel 2” hose reel w/ electric roll up, 80’ of water hose, upgraded to 3” lines, works well

– 7 tube Kwik Kleen grain cleaner, like new, shedded, assorted tubes

– Forklift, older model, runs but needs work

– Assortment of aeration equipment, some for flat storage, some for grain bins

– Aeration fans

– (4) brand new grain bin spreaders, bought for 36’ diameter bin

– 32 KW P.T.O. generator on 2 wheel trailer

– Misc. hyd. hoses & hyd. motors

– Very large Alligator hyd. jack, approx. 22-26 ton, jack works but slow leak

– Attachment for STS JD combine to drain water out of grain hopper

– Slow down kit for JD walker combine, for beans, etc.

– (2) spacers for duals on combine

– Bat wings for finger reels on flex header, enough for (2) 30’ JD heads

– High torque feeder housing drive, fits JD STS combine, brand new, used about 700 hrs

– (4) tractor tires, single rib, 7-50-20SL

– Homelite 4” water pump w/ gas engine

– Air seeder hopper for 7” auger  

 

54. Peters Farm – Bisbee, ND – 701-230-1898

– 10×70 Buhler Farm King P.T.O. auger w/ swing out hopper, mechanical drive

 

55. Gannon Larson – Leeds, ND – 701-230-0262

– 1993 4010 Concord air drill w/ Borgault seed boots and shovels, 1993 3000 Concord seed cart, two hi-cap rollers plus canola roller, includes some spare parts and spare tires, gone through spring 2014

 

56. Sexhus/Kakela Bison Ranch – Leeds, ND – 701-740-1388 (Dennis)

– 5 Ton 6×6 M809 Series dump truck w/ Cummins engine, near new tires

 

57. Jason Leer – Wolford, ND – 701-771-2593

– 49’ Wilrich 2500 field cultivator, has 4 bar harrows

– 19’ International chisel plow, has 3 bar harrows

– 10×61 Westfield swing out auger

– 1500 gal poly water tank

– Cattle feed bunks, 10’, 12’, 14’

– Approx. 8 cattle panels

 

58. Hilman Benson – Cando, ND – 701-739-0386

– 1983 8820 JD combine, 3,022 hrs., 2 speed, all crop cyl., adjustable rear axle

– 1996 9600 JD combine, 6448 engine hrs., 4351 sep. hrs.

– 930 Flex head

 

59. Kris Larson – Leeds, ND – 701-351-2934

– 53’ Herman harrow

– 70×51 Westfield auger, 13 HP, gas Honda motor

– (2) 30’ Moller header trailers

– JD row crop cultivator

– Stack mover

– 2000 Chevy Silverado pickup, LS Z71 package, 181,233 miles

 

60. Jeremy Johnson – Cando, ND – 701-370-2029

– JD 570 rotar sprayer

– Aeration tubes for grain bins

– 1991 Chevy 2wd pickup w/ 30,000 miles on new motor

 

61. Local Farmer

– Single compartment slide in seed tender with hydraulic auger

– 60’ late model Herman super harrow

– 33’ Flexicoil air seeder w/ TBT 1720 tank 9” spacing, steel packer wheels, markers, bean manifolds anhydrous attachment, factory rear hitch w/ hydraulic winch, monitor

 

 

62. Jordan or Bruce Rinas – Egeland, ND – 701-303-0707

– 27’ JD 1610 chisel plow, good 3 bar Summers harrows

– 1994 Ford 4wd SUV Explorer, 113,000 miles, auto trans.

 

63. Terry Borstad – Devils Lake, ND

– (2) floating Wastermaster water pumps, one Tecumseh engine, one Kawasaki, several lengths of 6” hose  

– Adjustable 7’ 3pt Ford blade for smaller tractors

– 7’ 3pt box scrapper for smaller tractors, heavy duty

 

64. Randy Simons – Oberon, ND – 701-351-4196

– 37’ 731 Morris chisel plow w/ Raven NH3 Super Cooler

– 8×74 Westfield auger, 10 HP elec. motor

– 96’ Shivvers cross auger

– (2) Hopper bin take-out augers, 21’ and 27’

 

65. Dan Webster – Penn, ND – 701-739-6122

– 2004 10’ batwing Woods rotary mower

– 8” belly dump auger

– 15’ 215 JD bean head w/ 15’ Sund pickup, screened

– Dacon 8 row cultivator w/ wings

– Lowry 1500 bu. hopper bin

– 56’ 8” hay raft auger, set up for elect. Motor

– Farm King 8” two stage snow blower

– 1957 Chevy 5700 tandem truck w/ good hoist

 

66. Andy Haider – Munich, ND – 701-682-5455

– 8×44 Jet Flow PTO drive auger

– (70) Lang anhydrous knives

– 1960 Ford F600 single axle grain truck, 292 V8, 4 speed, 14’ box, 121,846 miles

– 1969 Ford F600 tag axle tandem grain truck, 330 V8, 4 speed, 20’ box, 59,236 miles, original owner truck

 

67. Jarvis Hegland – Oberon, ND – 701-798-2685

– Summers 2 pt. sprayer w/ 500 gal. tank

– 700 Versatile tractor, tires 60%

 

68. Caliber Midstream (Eric Wiens) – Alexander, ND – 720-329-4061

– New Holland 9682 tractor, runs well, 4 sets of triples (80%), front right fender damage

 

69. Brent Kurtti – Mylo, ND – 701-866-4762

-1987 25’ Case self-propelled swather w/ finger reel

– JD 535 baler

– 50’ Summers harrow

– 30’ header trailer

 

70. Nicholas Schmaltz – Towner, ND – 701-776-2557

– 1995 K3500 1 ton dually pickup w/ 11’ flatbed, about 115,000 miles, manual 5 speed trans.

 

71. Jeff Domres – Langdon, ND – 701-370-2278

– 25’ 15 ton pitle hitch trailer

– Manure fork for skid steer

– Cattle head gate

– Hopper w/ auger, has hydraulic motor, holds 20 bushels

– 75 gal L-shaped fuel tank w/ tool box, brand new

 

72. Lawrence Mattern – Rugby, ND – 701-771-2035

– 1995 379 Peterbuilt tri-axle grain truck, 20' box, steerable pusher axle, 60 series Detroit, 13 speed Road Ranger trans.

– 1973 4430 2wd tractor, no 3 pt, 3 speed syncro, 20.8-34 tires, 2 hyd, 10,800 hrs

– 143 JD loader w/ grapple

– 24' JD 235 tandem disk

– Westfield 7×30 grain auger, electric motor, bristles for beans

– (3) 18.4-30 tires for MFD (40%)

 

73. Glenn Ewert – Langdon, ND – 701-256-3657 or 701-370-2213

– JD 8820 combine w/ 212 pickup head, around 6500 hrs, Titan 2, dual range, cyl. speed, well maintained, good cond.

 

74. Roger Skiftun – Harvey ND – 701-341-4062

– Pull type windrow roller

– (2) hydraulic drive augers, 6×15 & 6×12

 

75. Duane Heidlebaugh – Knox, ND – 701-583-2354

– Vermeer 605 J baler, hydraulic tie, twin tie arms, shedded

 

76. Wallace Knutt, Rock Lake, ND -701-370-8857

– 510 JD round baler

– 114 New Holland hydro swing

 

77. Eldon Held – Egeland, ND – 701-370-8874 (Roger)

– 27’ 1600 JD chisel plow

– 20’ Versatile pull type swather

 

78. Dave Schmaltz – Willow City, ND – 701-741-7006

– JD 24T square baler

 

79. Jeff Schmaltz – Willow City, ND – 701-203-2210

– 8480 Case IH round baler

– 280 H Oswalt mixer/feeder wagon

– 1984 Case IH 3294 mechanical front wheel assist tractor, 8,680 hrs

 

80. Rick Kuchar – Michigan, ND – 701-351-0463

– 16’ 922 MacDon auger hay head

– 25’ Premier 1900 pull type swather with finger reel

 

81. Larry Martin – Harvey, ND – 701-324-4027

– 6×20 Gooseneck stock trailer

– Jet Stream pull type sprayer

 

82. Justin Maddock – Maddock, ND – 701-438-2581

– 2001 International Eagle semi

– (2) Rowse D/9 mowers

– 2010 New Holland DR7090 round baler

– 20’ JD field cultivator

 

83. Landon Plummer – Hannah, ND – 701-370-9737

– 1999 120' Flexicoil sprayer, 1000 gal. tank and 500 gal. tank, has P.T.O. and hyd. pump, 2 sets booms, heavy duty frame

 

84. Gaylen Sieler – Cando, ND – 701-230-1985

– 24' Versatile pull type swather, has transport, shedded

 

85. Bruce Oksendahl – Rugby, ND – 701-771-8684

– 14' model 1014 hydro swing

– 41' Rowse dump rake

 

86. Northeast Pipe & Panel – Hartington, NE 402-640-0248

– 120 (12 bundles of ten) new galvanized 6 bar x 20’ continuous fence panels w/ clips & connectors

– 60 (6 bundles of ten) 5×12 portable corral panels

 

87. David Steinbach – New Rockford, ND – 701-302-0086

– 25’ Case IH 8220 pull type wind rower

– Paul livestock scale

 

88. Duane Hawk – Wolford, ND – 701-351-4480

– Behlen 360 continuous flow dryer

– 628 Westgo incline takeout auger w/ 5hp elec. motor

 

89. Harlo Elevator (Ross) – Leeds, ND – 701-466-2612

– 120’x13” Westfield auger w/ P.T.O. reducer

 

90. Todd States – Bisbee, ND – 701-230-8780

– 36’ JD air seeder, 787 cart, 730 tool

 

91. Andy Lange – Webster, ND – 701-395-4335

– King 8 row 30” row crop cultivator

– IHC 883 corn header

– 13’ IHC 810 7 belt Melroe 388 pickup head

 

92. Jen Waagen – Fargo – 701-438-2765 (Brian)

 – 24’ JD 220 disk

– JD 6030 2wd tractor, 1000 P.T.O., 2 hyd

– 400 Versatile swather

– Swather transport

– 60’ JD chisel plow

– JD 7700 combine with straight and pickup head

 

93. Terry Hertzell – Munich, ND – 701-370-0699

– JD 8300 tractor, 215 HP, 1,000 Big Shaft PTO, MFWD, 4 hyd, front weights, 14.9-42 rear duals & 14.9-30 front tires (35%), stored inside, excellent condition, 7880 hrs, serial #: RW8300P006875

– Woods 315 bat wing 14’ mower

– Premier 1500 30’ pull type swather, bat reel

– Floater sprayer tires, 20.8-38, came off 206 Rogator, like new, used one season

– 48’ Semi flatbed trailer w/ hay extensions

– JD LA 145 lawn mower w/ 48” mowing deck

– 2000 985 JD cultivator 60’ 3 bar harrow 

 

94. Larry Swenson – Cando, ND – 701-303-0379

– 1996 32’ fifth wheel camper, Park Avenue Electra, Model 32 RK, one slide out, stored inside, very nice shape

– 13’ Woods B320 single wing batwing mower

 

95. Bryan Lawler – Hansboro, ND – 701-266-5391 or 701-367-9778

– 354 New Holland grinder/mixer

 

96. Gerald Christenson – Bottineau, ND – 701-228-8657

– 26’ bumper pull trailer

– (2) 18.4 38 tires on IHC rims (1086)

– (2) 20.8 38 tires on rims, decent

– (4) 16.5×16.1 tires

– (2) 21.5×16.1 tires

 

97. Arne Berg – Devils Lake, ND – 701-351-3305

– 72” Buhler Farm king rear discharge 3pt, P.T.O. finishing mower

 

98. Paul McCarthy – Devils Lake, ND – 701-351-2264

– 1960 Dodge 2 ton grain truck, steel box & hoist

– 3pt post hole digger

 

99. Reggie Nohrenberg – Pingree, ND – 701-320-4265

– JD 30’ model 1850 not till disk air drill, 1900 tow between cart, brand new packer wheels, boots, new bearings, etc., nice drill

 

100. Bea Wolfe – Esmond, ND – 701-341-7961 (Glenn Wolfe)

– 21’ Bush hog disk, non-rock flex w/ 2 bar drag

– D&E grain vac w/ hose reconditioned, newer used

– Silage 12’ dump wagon, excellent condition 

 

101. Todd Wolfe – Esmond, ND – 701-249-3320 (AM)

– Hesston 1014 mower conditioner

– Gehl 2262 mower conditioner

– 14’ Hydro swing hay conditioner, double cut, new parts, nice shape

– 825 Belarus tractor w/ 707 Leon loader and grab fork

 

102. Local consignor

– Summers reel type hydraulic drive rock picker, decent shape

 

103. Devin Vetsch – Rugby, ND – 701-776-2845

– 1989 Chevy S-10 2wd pickup, shot box, 4 cyl., auto, new tires, 86,000 miles, very good cond.

– FNC tire balancer model 2500, 115 V

 

104. Charles Schiestel – Wales, ND – 701-370-1757

– 42’ Manure hopper bottom trailer, AG hoppers

– Rem 1026B grain vac

– 10” 70’ Farm King auger

 

105. Matt Ziegler – Devils Lake, ND – 701-351-7119

– Diesel powered generator, brand new

– Gas powered generator w/ Honda motor & a 3” trash pump

– (2) 1100 16 tractor tires

– (4) 24.5” truck tires

 

106. Wayne Larson – Brocket, ND – 701-247-3394

– 345 Owatonna mustang skid steer

– 25’ model 1020 Case IH flex head w/ finger reel, poly bottom

 

107. Travis Stuberg – Leeds, ND – 701-351-1288

– 1999 Ford club cab diesel pickup, ¾ ton, about 201,000 miles

 

108. Duane Bauerle – Harvey, ND – 701-340-1970

– Super C International tractor

 

109. Willian Hejlik – Lakota, ND – 701-351-3074

– 2002 Skidoo Summit 800 Highmark w/ 1500 miles

 

110. Neil Langton – Devils Lake – 701-739-6267

– 843 Corn head

– Dry bean header w/ 14’ sund pickup, has trailer

 

111. Dana Westemeier – Bisbee, ND – 701-351-3661

– 38’ International field cultivator

– 24’ JD 224 straight head

 

112. Local consignor

– 60’ JD model 2200 field cultivator w/ harrows, good shape

 

113. Shawn Amundson – Langdon, ND – 701-256-5932 or 701-370-2542

– Approx. 1200 gal fiber glass water tank

– 500 gal diesel tank, no pump

– (2) field service tanks no pumps

– (2) 7” grain augers

– (2) Jet skis, one Polaris, one Sea doo, (no titles)

 

114. Randy Thompson – Cando, ND – 701-740-8866

– 2001 Sea Ray boat, 18 ½ ft. long, 135 HP inboard motor, low hrs. (approx. 150), has trailer and tarp

 

115. Scott Foss – Maddock, ND – 701-240-5010

– 46’ WilRich field cultivator, complete walking tandems, 3 bar harrow

– 2010 48x78x102 timpte air ride hopper trailer, triple axle, tires & brakes (70%), 24.5 tall rubber,

201,000 miles

 

116. Chad Duchscher – Rugby, ND – 701-208-0992

– 2014 52’ land roller, pneumatic down pressure, weight package

– 9’ IH 1100 sickle mower

– Case 90 or 94 series mounts for 895 Allied loader

– 4’ extension for Case IH 20 or 30 series combine

– 12’ Hydraulic angle Stainless steel blade for skid loader or Allied

– Magna cut chopper for 20 or 30 series Case IH combine

– Set of tracks for any ¾ ton pickup or smaller

– 72” Countyline 3pt finishing mower

– 1999 Dodge Ram Rem 2500 4wd pickup, V10, 185,000 miles, runs good

 

117. Hermansdale Farms – Brinsmade, ND – 701-740-7500

– 2002 Ford F-550 service pickup, 7.3 diesel, automatic, fully equipped w/ air, mechanics cab & 300 gal diesel tank & pump, 100,000 miles, excellent cond.

– Pit Express drive over jump auger, hydraulic drive, super capacity, very nice shape

– 1994 Mack triaxle grain truck w/ E-7 Mack, diesel, roll tarp, complete swing out gate, pusher axle, 5 speed Allison auto, excellent cond.

– Miller Bobcat portable welder, super low hrs

– Jacuzzi hot tub, fully equipped, nice shape

 

118 Cenex of Cando – Cando, ND

– (3) NH3 running gears

– Misc. items

119. Lorin Haagenson – Leeds, ND – 701-739-7729

– 41’ Morris 8900 chisel plow, setup w/ anhydrous and 3 bar harrow

– 57’ Flexicoil 800, 9” spacing w/ 4 bar harrow

 

120. BTR Farmers Co-op – Leeds, ND – 701-466-2281

– Bushing batwing mower, model 2620 double folding wings

 

121. Darold Schmalts –Rugby, ND -701-208-0549

-WilRich 46 ½ 2500 series field cultivator, 7” spacing, new 9” knock on shovels, 4 bar harrow, heavy greasable wheel hubs  

– Case IH 183 12 row 30” Vibra Shank row crop cultivator with rolling shields and 200 gal row crop bander sprayer

– 40’ 3 bar harrow off of 40-10 Concord seeder

 

122. Blaine Wass – Starkweather, ND – 701-292-4163

– 8 yard Minglad scraper

 

123. Tim Sager – Cando, ND -701-741-2246

– 1989 Versatile 4750 self-propelled swather, 25’ 4025 header, cab- air & heat, hydrostatic, 76hp Ford diesel engine, 1364 hrs, canvas good shape

– Rem 1026 grain vac

– (65) bolt on 9” Nicholas cultivator shovels, (18) are Tru-width, 47 regular, brand new, never used

– (41) Try-width 18” cultivator shovels, 50 degrees, brand new, newer used

 

124. Gordon Maresh – Michigan, ND – 701-740-0967

– 9’ International 1100 sickle mower

 

125. Jeff Greg – Rugby, ND – 701-208-0897

– 30’ IHC model 1010 straight head w/ bat reel

– Double 30’ header trailer, holds two 30’ or smaller heads, nice shape

 

126. Dale Holmstrom – Jamestwon, ND – 701-269-2003

– 44 Flexicoil shanks

 

127. Travis Wiersch – Drake, ND – 701-626-2414

– (2) 24’ chop hay feeders, brand Industries America, news

 

128.

 

129.Chris Keating – Devils Lake, ND – 701-739-5148

– 1975 Chevy C-50, V8, 427 motor, has 300 gal water tank & 1000 fuel tank, reads 60,080 miles

– 2004 Ford F-350 dully w/flat bed, 4wd, super cab, diesel, electric hydraulic lift, reads 320,861 miles 

130. Randy Benson – Bisbee, ND – 701-741-1437

– Cattle squeeze chute

Photo Gallery

Notes: