NOTE DATE CHANGE: Very Large Annual Spring Farm Equipment Auction

 

Tuesday, April 18, 2017 – 9:30 a.m.

 

Leeds Farm Equipment Lot, Leeds, ND

 

Equipment is pouring in! Call immediately to consign and reserve your spot.

701-303-0379

 

Already consigned:

10. Tim Krueger – Egeland, ND – 701-230-1821

– 1992 Case IH 8500 33’ Air seeder PIN# 0135434, full monitor, steel press wheels, hydraulic fan, fill auger, Gustafson treater, extra new parts & eagle beaks, low acreage use, Retired 3 years ago, always shedded

– Homebuilt Grain trailer 76" wide – 14’long – 4’sides, Box w/ tarp, 3 piece swingout end gate, PTO hoist tandem axle, 9:00 20 tires and21.5 x 16.1 Flotation tires, hitch to pull with tractor

– Fieldmaster earth mover, 3 yds.

– 100 bu. steel box on 4 wheel trailer w/ hoist

– Melroe 388 combine pickup, (6) 10’ 6” rubber belts, good condition

– Winco generator, 12,500 watts w/ 4 cylinder Winconsin engine on trailer

– Water transfer pump, new

– (2) Water tanks that fit in pickup, 425 gal. & 200 gal.

– 150 gal. sprayer tanks

– Cyclone broadcast seeder, 12V, Model M3B400R

– Husky TSC PTO Broadcaster

– Engine hoist

– Engine stand

– Tire wheel cart

– Parts washer, new

– (4) 250’ rolls of 4” drain tile, solid

– (2) 50’ rolls of 4” perforated drain tile w/ sock

– ATV garden trailer, tilt box, end gate, 3’ wide x 5’ long, 25x12x9 tires

– 4 wheel trailer, tailgate, 44” wide x 6’ long, golf cart wheels and tires

 

11. Clayton Krueger – Devils Lake, ND – 701-303-0792

– John Deere 2 wheel grain cart with rear PTO auger

 

12. Ron Schill – Langdon, ND – 701-305-0411

– 1990 GMC ext. cab. dually pickup, 4WD, new 454 motor, 5th wheel late, new tires, new alt., manual transmission (rebuilt), clutch, etc., highly maintained unit

– Hesston 1014 12’ Haybine, new teeth, top & bottom guards, chains, field ready

– John Deere 1600A 14’ Haybine, new knife and guards, chains, field ready

– John Deere 500 bu. grain cart, roll tarp, nice condition

– 2002 stock trailer, 7’ x 26’, good condition

–  Behlen cattle waterer, used one yr., poly guard

– 1989 Lincoln Towncar, 4 dr., less than 100,000 miles

– New calf warm box, never used

 

13. Brock Schill – Langdon. ND – 701-370-3465

– 32’ John Deere 1010 cultivator w/ new 9” knock on shovels w/ air tool for 777 air seeder, good disks and packers

– (2) Hopper bins, 300-400 bu., good condition

– Westfield 8×60 PTO auger

– 7’ International trail type mower

– (2) 16.5 x 16.1 tires for 777

– (2) 21.5L x 15.1 tires for 777

 

14. Loran Ellingson – Park River, ND – 701-284-7025

– 1969 Ford F-600 single axle grain truck, 14’ steel box & hoist, 300 6 cyl. 4+2, good maintenance, many new parts on engine, carb, alt, battery, repainted box, decent truck

 

15. Bret McCloud – Rolla, ND – 701-477-3123

– 50’ ST830 New Holland chisel plow, Gates 3 bar heavy harrows (very good), been shedded 10 out of 13 years, over all nice condition

 

16. Steve Hoffart – Knox, ND – 701-351-1352

– JD 535 Round baler w/ 540 P.T.O., always shedded, very nice condition

 

17. Robert Mackey – Starkweather, ND – 701-292-5300

– 806 IHC 2WD Tractor, diesel w/ heavy duty Dual loader, 8’ bucket and grapple, excellent well maintained tractor, 540 P.T.O., 2 hyd., cab

 

18. Kurt Kramer – Towner, ND – 701-578-4686

– 14 ½’ 2008 956 JD flail mower/shredder, pull type, 1000 P.T.O

 

19. Michael Schaefer – New Rockford, ND – 701-652-5304

– 1999 Chevy 3500, 454 gas engine w/ auto transmission, 4×4, dually, service body w/ 250 gal. fuel tank, 130,000 miles

– CPL tool box

– (7) used low profile 22.5 semi drive tires

 

20. Gaylon Sieler – Egeland, ND – 701-230-1985

– 10×62 Farm King auger with swingout

– 33’ International chisel plow w/ walking tandems and harrows

 

21. David Lagein – Rock Lake, ND – 701-370-8826

– John Deere 450 hydra push manure spreader w/ 9.00×20 tire, 540 PTO

– Woods B320 rotary mower w/ single right wing, 1000 PTO

 

22. Nyle Myhre – Sheyenne, ND – 701-996-2654

– 7×36 Westfield grain auger, 220 electric motor equipped w/ grain cleaner

 

23. Brian Goeser – Munich, ND – 701-370-1114

– 1995 50’6” Bourgault 4350 Hoe air drill air seeder, 150/50/150 split, fully equipped w/ 5710 seeding tool, 7 ½”space, steel press, shedded since new, very nice shape

– 100' 2009 High Wheel Summers Ultimate suspended boom sprayer, wind screens, 1500 gal. tank, Raven 440 monitor, tires 380/90/46, always shedded, nice shape

 

24. Lee Jones – Devils Lake, ND – 218-791-1553

– 1983 Chevrolet ¾ ton diesel pickup, regular cab, long box, 4wd, automatic w/ Meyers snowplow

 

25. Kenneth Olson – Edinburg, ND – 701-331-1155

– 2009 Case IH MX140 PRO MFWD Tractor with Case IH L-750 loader and grapple, 3 point hitch and 4 remote outlets, deluxe cab with suspension, 16 speed power shift transmission with left hand reverser,  14.9 R46 rear tires and 14.9 R 30 front tires,  front fenders,  2500 hours,

always shedded, nice

 

26. Unlisted seller

– Lacrosse 15 ton Lowboy semi-trailer 20’ w/ 4’ dove tail, attached flip ramps, good rubber

– 1987 GMC 7000 series 24’ van body truck, roll up door, 427, 5+2, 60 gallon saddle fuel tank

– Self-propelled swather transport trailer, heavier duty, bigger trailer

– Older style spray coupe trailer

 

27. Jeff Teubner – Cando, ND – 701-303-0104

– 4630 JD 2wd tractor, factory 3 pt., P.T.O., factory JD Jiffy hitch, quad range, good A/C and heat, 14.9 46 tires, 50% (rims bought new) (excellent sprayer tires), 9067 hrs, engine majored at 7700 hrs.

– Rock-o-matic reel type rock picker, P.T.O. drive

 

28. Lance Schill – Langdon, ND – 701-305-0411

– 544B John Deere Pay loader, 3rd valve, new fuel pump, new battery, new cutting edge on loader, heavy duty grapple fork (Grapple Tech), grapple is $8000 option, block heater, doesn’t use oil, 2½ yd. bucket, good cab, good glass, heat, fans, etc.

– (3) Creep feeders, (1) Vern’s used one year, (2) K&K used 2 yrs., good condition, always stored inside

 

29. Roger Skiftun- Harvey, ND – 701-341-1400

– 2003 GMC tandem lift tag grain truck, swing out gate, 8.1 gas, 5+2, roll tarp, 57,700 miles

 

30. Mark Wisness Estate – Maddock, ND – 701-438-2482 or 701-341-1945

– 1998-99 9610 JD combine, 4050 separator hrs., 5882 engine hrs.

– 930 Flex head w/ Crary air reel

– 230 straight head w/ bat reel

– 914 pickup head

– 222 Sunflower head

– Header trailer

– 2012 ABU tandem axle 8×20 car trailer

 

31. Brian Kenner – Maddock, ND – 701-866-6786

– 25’ Premier 1900 pull type swather

– 36’ Prairie Star 4600 pull type swather

– (3) B&B twin 1000 gal. anhydrous tanks

 

32. Roy Kenner – Devils Lake, ND – 701-351-1013

– (2) Semi tires, 385-65-R-22.5 (50%)

– (3) Good Year pickup tires, 265-70-R-17 (80% tread)

– (1) 235-70-R16 (80%)

– (4) CT 265-70-R-17 (50%)

– (4) Good Year 265-60-R-20 (40%)

 

33. Matt Ziegler – Devils Lake, ND – 701-351-7119

– 1991 Wilson aluminum stock trailer, 8×32, gooseneck, triple axle, new roll up door in back, nice shape

 

34. Rock Lake Fire District – Perth, ND – 701-370-2073

– 1978 Chevy twin screw truck, 427 gas, 10 speed, air brakes, frame mounted 2500 gallon water tank, 3” pump, hose reel, nice shape

 

35. Jim Diepolder – Willow City, ND – 701-366-4643

– 1971 Ford F-610 truck, 19’ box & hoist, roll tarp, 4+2, V8 gas engine

– 950 Vertical fold cyclo planter, 12 row, 30”, almost always shedded, good shape

 

36. Gary Bacher – Wolford, ND – 701-583-2236

– 20’ 4400 Versatile self-propelled swather, bat reel, new tires, shedded, nice

– 18’ Offset Wishek Model 642 disk, rebuilt, new disks, new bearings, new scrapers, outstanding older disk

– Hot water steam cleaner pressure washer

– Gas/propane generator/power plant, medium duty

 

37. Doug Anderson – Leeds, ND – 701-466-2360

– 50’ 4 bar Herman harrow, pressure springs, decent teeth

 

38. Konzak Farm Agency c/o Stacey Konzak – Devils Lake, ND – 701-303-0263

– 4020 JD 2WD tractor, New 18.4 34 tires, dual, hyd., side console, 8 speed syncro, factory JD roll guard cab, differential lock, Dual P.T.O., 6349 hrs, Has 300 Du-al loader and front mount snow blower, bought brand new, have original bill of sale, excellent condition

 

39. Brad Larson – Devils Lake, ND – 701-230-2991

– NAPA hot water pressure washer

– Pallet of JD trash whippers

– Lincoln wire feed welder

 

40. Steve & Don Neameyer – Mylo, ND – 701-656-3637

– Case IH Model 8825 30’ self-propelled swather, turbo diesel, finger reel, 2238 hrs., cab, AC, heat

 

41. Leon Pfeifer – Minnewaukan, ND – 701-739-9378

– Combine trailer, 2 tandem axles, pintle hitch

 

42. Jeremy Martin – Rock Lake, ND – 701-370-1787

– Gehl Model 1065 Chopper w/ pickup head

 

43. Duane Bauerly – Harvey, ND – 701-340-1970

– (2) H’s narrow front IHC tractors, P.T.O., both run

– W-6 IHC tractor, standard type, P.T.O., painted, runs good

– W-4 IHC tractor, standard type, P.T.O., painted, runs good

 

44. Brian Sauer – Langdon, ND – 701-370-9019

– (2) JD 42’ 787 air seeders, both have newer style seeding tools, both have bigger tanks (230 bu.), one has markers, both are decent condition, used last year

 

45. Jeff Boucher – Rolette, ND – 701-871-9006

– 2005 Freightliner Columbia Condo C-15, 10 speed, engine is excellent, super clean sharp looking truck, 900,000 miles, ready to go

 

46. Arlen Lindberg – Bisbee, ND – 701-370-1650

– 70’ Herman harrow, 5 bar

– JD Model 37 sickle mower, trailer type, w/ 7’ bar

– 1000 gal fuel tank

– 125 gal service tank

– Big floor jack

– Troy built tiller w/ brand new engine in box

– Engine stand

 

47. Myron Jacobson – Rock Lake, ND – 701-370-8152

– 2320 Flexicoil air seeder w/ 39’ Model 5000 seeding tool, 9” space

– JD 2320 self-propelled swather w/ sliding Model 130 21’ header, gas, cab, A/C & heat

– 25’ JD Model 590 pull type swather w/ finger reel

– 100’ Summers wheel boom sprayer, 1000 gallon tank, Raven control, mid mount booms, foam markers

– 1986 Ford ¾ ton pickup, automatic 4WD, has 60’ slide in Summers sprayer w/ Honda engine

 

48. Tony Galow – Bisbee, ND – 701-799-4212

– 25’ 925 JD w/ transport, bat reel

– 30’ 930 JD w/ transport, bat reel

– 212 JD pickup head

 

49. Josh Anderson – Rugby, ND – 701-215-1005

– 45’ WilRich field cultivator w/ 3 bar harrows

 

50. Brady Peterson – Rock Lake, ND – 701-230-2586

– 1998 Ford pickup, rebuilt transmission one year ago, 172,000 miles

 

51. Bruce Kitsch – Webster, ND – 701-395-4422

– 1975 Chevy C-65 Tandem grain truck, 22’ box & hoist, roll tarp, 366, 5+2

– Grain Pup trailer, 15’ box w/ hoist, pintle hitch, tarp

– Dakon silage dump wagon

– 40’ JD 1610 chisel plow w/ coulters, harrows

 

52. Gil Haus – Starkweather, ND – 701-292-4199

– 1985 GMC High Sierra 4WD pickup, lock-out hubs, automatic, freshly rebuilt 350 engine

 

53. Phil Sanford – Michigan, ND – 701-741-5705

– WR 22 Vermeer V rake, double fold, nice shape

– Grapple fork, heavy duty, double cylinder, adjustable from 72-84 inches, excellent condition

 

54. David Kopseng – Harvey, ND – 701-399-9724 or 399-9959

– 1977 JD 4630, factory 3 pt., 3 hyd., quad range, rear weights, 13,000 hrs, good A/C, one owner tractor, upgraded starter, engine overhauled, quad range just done, 3 hyd. updated hyd. to Pioneer

 

55. Kerry Bauerly – Harvey ND – 701-341-7477

– 1996 Dodge 1500 4wd pickup, ext. cab, short box, automatic trans, 318 V8, good tires, clean

– 1989 Diamond D 5 horse slant load horse trailer, dressing room w/ A/C, table & bed, approx.. 40’ long

 

56. Other Equipment

– 2007 Sitrex 20 wheel V-rake

– 2007 Rowse D9 mower

– Case 970 tractor w/ Leon 707 loader

– Artsway 425A grinder/mixer

– 1975 Case 1370 tractor

– 1999 John Deere 566 baler

– 100 gallon L-shaped fuel tank w/ pump for pickup

– Powder River panels, (4) 9’ gate door panels & (4) 10’ panels

– (15) Misc. gate & regular panels

 

57. Smith Equipment Consolidated, Inc. – Knapp WI – 715-665-2000

– Unused Lowe hyd. Auger 750 w/ 9" & 12" w/ skid steer quick attach

– Unused Stout Brush Grapple HD72-4 close-tine w/ skid steer quick attach

– Unused Stout Brush Grapple XHD 84-6 w/ skid steer quick attach

– Unused Stout Rock Bucket/Brush Grapple Combo HD72-3 Open-End w/ skid steer quick attach

– Unused Stout Material Bucket 84" w/ double-cut edge w/ skid steer quick attach

– Unused Stout Receiver Hitch Plate w/ skid steer quick attach

– Unused Stout Solid Weld-on Skid Steer Plate

– Unused Stout Walk-Through Pallet Forks 48" w/ skid steer quick attach

– Unused Stout Full-Back Pallet Forks 48" w/ skid steer quick attach

– Unused Regular Pallet Forks 48" w/ skid steer quick attach

– Unused Stout Bale Spear-Round w/ skid steer quick attach

– Unused (4 Tires sell as one lot) Maxam 12-16.5 Skid Steer Tire 12-ply

 

58. Roger Held – Egeland ND – 701-266-5143

– John Deere 925 rigid head w/ bat reel

– 903 Melroe plow, 7 18’s

– 27’ JD 1610 chisel plow

– Sand’s prong type rock picker

 

59. Warren Anderson – Rolette, ND – 701-550-0245

– IHC A wide front tractor, tires 90%, excellent shape

 

60. Lawrence Mattern – Rugby, ND – 58368

– 912 JD header w/ Melroe pickup

– 212 JD w/ 6 belt pickup

 

61. North East Pipe & Panel Inc. – Hartington, NE – 402-640-0248

– (120) 6 bar x 20’ continuous livestock panels (new)

– (40) 5’ x 12’ portable corral panels (new)

 

62. Cody Hunt – Munich ND – 701-256-0399

– 6” Crain Handler grain vac

 

63. Alan Fosness – Barton ND – 701-771-9878

– 2001 F350 4dr Dually, 7.3 Power Stroke heavy Ranch hand, front bumper & Rugby flatbed, salvage title

– 2002 Big T 40’ Gooseneck flatbed trailer, pull w/ pickup or semi

– 510 Walinga grain vac w/ hoses

– 490 IH Disk, 32’

– 57’ Flexicoil 5000 seeding tool only

– 6212 Orbit-Air Gandy box

 

64. Kurtz Brothers – St. Michael ND – 701-351-1108

– 10 x 71 Westfield auger, low pro hopper, newer auger, new hopper, new bottom flighting

– 21’ Magnum Pup trailer, all steel, 16’pole, new roll tarp, always shedded, very well maintained

 

65. Brian Bjerke – Leeds, ND – 701-739-7186

– 45’ Flexicoil 2320 Air seeder w/ 5000 seeding tool, good carbide eagle beaks, new seed metering, steel press wheels, exc. cond., well maintained, ready to go

– JD 912 pickup head, single point hookup, all new auger fingers, well maintained, exc. cond.

 

66. Miscellaneous Equipment

– (4) Used 21.5 – 16.1 tires

– Straw chopper from JD 9600 combine

 

67. Jim Mongeon – Rolette ND – 701-246-3466

– 1994 Ford New Holland 9280 tractor, 8300hrs, well maintained, 20.8 – 38 Firestone (50% plus), EZ Steer guidance, PTO, 4 hyd w/ return, manual transmission

 

68. Mike Hakanson – Maddock ND – 701-341-0470

– 2002 Chevy crew cab flatbed Duramax, 216000 miles, leather seats

– (2) 8” aluminum Michaels augers for hopper bottom trailer

 

69. Tim Tuchscherer – York ND – 701739-2537

– 1966 Ford ¾ ton pickup w/ 360 motor

– Summers reel type rock picker w/ chain drive

– 580 GT grain dryer

– 570 GT grain dryer for parts

– 2 sets of pallet forks for loaders

 

70. Brent Kurtti – Mylo, ND – 701-953-8263

– 1992 JD 9600 combine, fine cut chopper

– JD 912 pickup head

– 25’ Crary C-25 flex head, JD adapter

– 27’ JD 230 disk

– 6 yd. Ashland scraper, 4 carry tires on back

 

71. Jerry Schuster – New Rockford – 701-302-0362

– 40’ 2004 5710 Bourgault air seeder, 5350 grain cart, mid row banders, Microtrack NH3, 9.8 space

– 10 x 36 auger

– Wheatheart auger

 

72. Josh Knutt – Bisbee, ND – 701-351-4621

– 1975Ford F800 tag tandem tender truck, 97555 miles, 10:00 20’s, 5+2, gas 392 V8 engine, w/ Wilmar Loadrunner 16 ton hyd. tender body, 2 compartments, Shurlock roll tarp

– (12) 2001 MaxEmerge Plus JD 3 bu. plastic hoppers w/ meters, off of JD 1770

– 1967 JD 3020 gas row crop tractor, 4870 original hrs., rear tires 15.5 38’s (nearly new), 8 speed syncro, factory 3 pt., 2 hyd., 540/1000 PTO w/ Dual 320 loader

– 4 tine grapple and manure extension for Dual 320 loader

– Category 2 Quick hitch for 3 pt.

– 50’ Bluejay Landwalker NH3 knife, 15” spacing, 5 fold, Nitrolator & expandable hitch, 2 seasons on knives and small plastic hoses

– Case IH 1083 8 row 30” corn head, has knife rolls, less than 800 acres on complete overhaul, new knives on rollers, new bearings, deck plates, chains and sprockets, steel snouts, left end converted to GVL poly

 

73. New Equipment

– 30’, 35’, and 40’ header trailers

– 8’, 10’, and 12’Box blades

– Snow pushers for skid steer

– Post puller for skid steer

– 120R pull type grader

– Hay feeders

 

74. B&H Oil – Leeds ND – 701-466-2928

-1989 Ford F-700 gas truck, 2000 gal Browning tank, dual pumps, 429 gas, 5+2, good condition

 

75. Mike Mygland

– 94 Tyler Patriot WT sprayer, outback 53 G guidance w/ auto steer, 4000 hrs, fair shape

– 935 Versatile, Cummins V8, Outback guidance w/ auto steer

– 195 New Holland tandem manure spreader, used little, exc. condition

– Walinga 510 grain vac, fair shape

– 2008 Yamaha 700 Rhino with tracks and tires, used very little, good condition

 

76. Dan Webster – Penn ND – 701-739-6122

– (2) 1000 Gallon Fuel Tanks with Gasboy Pump

– 148 John Deere Loader with grapple (off 4020 Like New)

– Low profile utility trailer with loading ramp

– 1967 White implement cabover truck with hydraulic tilt bed and hydraulic winch, 350 Chevy engine

– John Deere Donahue Trailer           

– 6”x16ft steel flex grain vac hose

– 220 volt Heavy Duty 10” bench grinder with stand

– Antique mechanical metal shear

– Antique drill press with manual transmission

– Dewalt 18V battery operated vacuum

– 2009 John Deere 1770NT 16 row 30” 2 point Planter, pro drive planter units, 5000 Series Dawn 2X2 Fertilizer openers Dry or liquid, 500 gallon liquid tank, john blue redball system for in row liquid fertilizer, one season on new planter discs, well maintained and always shedded. 

– 24ft Wil-rich field cultivator with three bar harrow.

– 2010 Farm King Model 960 snow blower, like new condition, used very little

– 5 screw grain aerators

– Hydraulic 12ft yard leveler

– Waterloo roadbox toolbox

– Delta Crossover pickup toolbox  

– 3 point steel grader blade

 

77. TK Farms – York ND – 701-351-3744

– 1993 JD 7200 12 row 30” planter, 2 pt. hook-up, JD 250 monitor, front fold, in furrow liquid fertilizer, XP roll units, extra parts to sell with it including banding coulters, JD edible bean & corn plates, separate meters w/e-sets (no plates)

– (3) sets running gear for 1000 gal NH3 tanks

 

78. Kevin Fritel – Knox ND – 701-208-1111

– 40’ dry fertilizer spreader, pull type, tandem axle, P.T.O.

– Rem 1026 grain vac w/ all tubes and attachments

 

79. Loren Knutson – Leeds ND – 701-466-2041

– IHC 1480 combine w/ Melroe pickup, 5800 hrs, engine recently rebuilt, shedded, excellent condition, used all the time, has big back tires

 

80. Wayne Rutledge – Langdon ND – 701-256-5634

– Vermeer H baler, running condition, always shedded

– Bale feeder

– 4 wheel liquid feed tub

 

81. Thomas Schill – Langdon ND – 701-305-0413

– (16) 11R 22.5 tires, (8) are ½ tread, some 25% to 30%, sold in pallets of 4

 

82. Briston Berg – Starkweather ND – 701-351-1960

– 18’ 2009 ABU tandem axle car trailer w/ ramps, 2” bumper hitch

 

83. Richard Casavant – Rolette ND – 701-550-9553

– 30’ JD header w/ finger reel, new wobble box, one season on sickle & guards

– 7’ Sno-Lander McKee Model 720 snow blower, 540 shaft, hyd. spout

– Summers heavy duty rock picker, large floatation tires, fork type, nice shape

 

84. Wallace Knutt – Rock Lake ND – 701-266-5574

– (2) set of duals, one set for IH, Good Year 18.4 38’s (50%) and one set for JD, Good Year 18.4 34’s, fair

 

85. Steve Walsh – Mylo ND – 701-382-9254

– 2008 Massey Ferguson 9435 hay conditioner with 16' 9125 conditioning head, 3700 hours, many new parts
– Gehl 520 V rake
– 510 Walinga grain vac
– 50' Summers medium duty harrow

 

86. Wayne Larson – Brocket ND – 701-247-3394

– 90’ H & S sprayer, suspended boom, windscreens, foam markers, P.T.O. pump, Raven control, 1000 gal. tank,  3 way knozzles

 

87. Dillon Rickford – Binford ND – 701-797-7179

– 48’ bale rack built from well pipe for a flatbed semi trailer, comes in 2 sections

– (2) 24’ cattle alleyways built from well pipe

 

88. Dustin Volk – Rolette ND – 701-550-2083

– H&S pickup box sprayer

– Spray coupe w/ Volkswagen engine, no drip knozzles

– 2001 Arctic Cat 4 wheeler, 500cc, automatic

– 150cc Go cart

– (2) 1 place snowmobile trailer

 

89. Tyler Karlsbraaten – Esmond ND – 701-230-1873

– 7200 JD planter, trash whippers, ground driven w/250 monitor, liquid fertilizer in furrow

– (7) feed through panels for cattle

 

90. Tim Sager – Cando ND – 701-741-2246

– 9400 JD 4WD tractor, 12 sp. Power shift w/ high & low range, auto steer, 4 hyd. plus return, 20.8 – 42 triples (65%) 2 tires are brand new, 5449 hrs

– 41’ Model 610 JD chisel plow, 3 bar Summers harrows w/ very little wear on almost new teeth, equipped w/ NH3 applicator

– 45’ Flexicoil air seeder w/ 2320 tank & 5000 seeding tool, tow between tank, 7½” spacing, Eagle beak openers

– 28’ Summers diamond disk

 

91. Joel Yoder – Mylo, ND – 701-351-4569

– 1998 4WD Polaris Sportsman 500, 4 stroke, very well maintained, synthetic oil, etc.

– 20’ x 6’ Simo livestock trailer, good solid floor, gooseneck, decent older trailer

 

92. Alois Schmidhammer – Cando ND – 701-968-3802

– 25’ Ezee-On disk Model 6650, 24” blades, approx.. 4 yrs old, like brand new

– 23’ Morris chisel plow

– 63’ Herman harrow

 

93.Fern Buchta – Leeds ND – 701-466-2316

– 2003 4WD GMC Envoy, 117,025 miles, looks new inside and out

 

94. Allan Brossart – Rugby ND – 701-208-0821

– 27’ JD 1610 chisel plow cultivator w/ harrows, walking tandems

 

95. Camron Atkinson – Willow City ND – 701-871-7368

– 900 Series Case IH planter, 16 row, 30” spacing, extra parts & drums

– 10” x 50’ Westgo swing out auger

– 20’ IH 480 disk

 

96. Yoder Farms – Mylo ND – 701-290-0600

– 56’ Model 5800 Case IH chisel plow, edge on shanks, double coulters on each shank, heavy harrows

– 2008 IHC semi-truck, Prostar, Cummins motor, 10 speed, API unit, bunk heater, full drivers fenders, deluxe cab, 820,000 miles

 

97. Sexhus/Kakela Bison Ranch – Leeds ND – 701-740-1388

– 2013 Frontier Model MS1455H manure spreader, hydra-push, like new

– 2016 JD 3046 Utility tractor w/ loader, PTO & hyd., w/ mower deck, very low hrs, near new condition

 

98. Jason Skaar – Hampden ND – 701-739-7266

– 1976 Ford F100 pickup, 390 engine

– Oliver 1800 tractor w/ Du-al loader, also has JD belly mount sickle mower

– 1000 gal anhydrous tank

– 7½’ Ber-Vac 3 pt. snow blower

 

99. Glenn Morstad – Hampden ND – 701-230-2249

– (2) Farm King 8’ canola rollers

– 16” SSR water pump

 

100. Mike Barendt – Devils Lake ND – 701-350-2229

– 2006 BR 780 New Holland baler, all new belts, big tires, extra sweep pickup

– 20’ 400 Versatile swather

 

101. Bruce Johnson – Edmore ND – 701-644-2713

– Woods bat wing mower, single wing

– Swinging steel cattle gates

– Steel posts

– Head gate

 

102. Neil Hager – Harvey ND – 701-341-0027

– (8) 285-65-24.5 low pro truck tires, (6) Ultra drives, (2) Good Year drives, brand new recaps

 

103. Michael Johnson – Fordville ND – 701-270-8080

– 30’ Rapet belt conveyor

 

104. David Ahlberg – Cando ND – 701-739-9448

– TR 95 New Holland combine, has 24’ straight head & pickup head

– Kenworth cabover semi tractor, Cummins engine, 16 sp.

– 1979 Timpte 40’ hopper trailer

 

105. Mylo Fire Department – Mylo ND – 701-290-0600

– 1978 Chevy fire truck, low miles, pump not working

 

106. Paul Vetsch – Esmond ND – 701-249-3213

– 1991 Ford Versatile 876, 4 hyd., 20.8 38’s (50%), 8030 hrs, mains, rods and top ends just done

 

107. Lorin Haagenson – Leeds ND – 701-739-7729

– 1997 Volvo semi, 60 series Detroit, wet kit, short sleeper, 9 sp, w/ 5th wheel Wilmar style tender w/ conveyor mounted on 24’ semi-trailer, electric roll tarp, 16 ton, sell as unit

– 2006 Chevy 2500 HD crew cab, 6.0 gas, 178,000 miles, auto, short box

 

108. Rodney Armstrong – Rolette ND – 701-550-9703

– 4650 JD mechanical front wheel drive, powershift, PTO, 3 hyd., complete fresh overhaul

 

109. Matt Young – Lakota ND – 701-739-2951

– (10) 8.25×20, 9.00×20, 10.00×20 tires

 

110. Brad Disrud – Rolla ND – 701-550-9446

– Set of over the wheel tracks for larger Bobcat, bolt on

– Swather transport

 

111. Dan Richard – Rolette ND – 701-550-9143

– 1981 GMC tandem twin screw grain truck, excellent tires, roll tarp, Detroit 8.2 diesel, 5+2

 

112. Gary Geisinger – New Rockford ND – 701-652-5512

– Canola roller on rubber tires, adjustable

– Set of Bloomheart tanks for front of tractor w/ framework & hyd driven pump

 

113. Cody Buchholz – Rolla ND – 406-855-9594

– (3) 10 corral panels

 

114. Byron Hill – Dunseith ND – 701-771-8982

– Knight Big Augie mixer wagon w/ scale

– 5’ Woods M5 Dixie King Cutter mower, 3pt. hitch

 

115. Scott Oksendahl – Rugby ND – 701-208-1318

– 2006 Ford F250 pickup long box, ext. cab, 6L diesel, has had EGR delete, 158,000 miles, some hail damage

 

116. James Myhre – New Rockford ND – 701-302-0384

– 1983 1880 Hesston 2WD tractor, 180hp, 4220 hrs, factory 3 pt, 3 hyd

 

 

117. Don Johnson – Grand Forks ND – 701-775-6640

– 1988 Dodge 4WD pickup, engine replaced, front hubs, differentials gone thru, heater system & radiator all redone, new tires, interior immaculate

 

118. Troy Voeller – Rugby ND – 701-208-1591

– 2013 24’ PJ car trailer, tilt deck, 2 axles

 

119. Roger Rance – Egeland ND – 701-739-7447

– 150 gal service tank

– Good wire feed welder

– 4 tires with rims

 

120. Thomas Good – Rolla ND – 701-477-6955

– 25’ Prairie Star 1900 pull type swather w/ end canola shear & finger reel

– Rock picker, small

– 9’ side sickle mower

 

121. Dan Brossart – Rugby ND -701-208-0545

– 72’ Gates harrow

 

122. Kent Swenson – Lakota ND – 701-247-3030

– 2007 S185 Bobcat, new tires, new bucket, 6350 hrs, excellent condition

 

123. Craig Koester – Cando ND – 701-968-3568

– EZ Guide 250 Lightbar guidance system w/ magnetic satellite receiver & software

 

124. Derek Morey – Minot ND – 701-509-9676

– 1979 Chevy C-70 grain truck, 427 engine, 5+2 Eaton trans, twin screw w/ 19’ box, 60,143 miles

 

125. Ervin Hulstrand – Warwick ND – 701-294-2191

– 1995 7’ x 20’ Gooseneck travel livestock trailer

 

126. Des McIntyre – Leeds ND – 701-230-1026

– 1995 Peterbilt 377, 470 Detroit diesel engine, 9 sp. Transmission

– 1995 Agco 9675 front wheel assist, 4000 hrs

 

 

127. Terry Jones – Towner ND – 701-822-2023

– 1998 JD 7710, front wheel assist, left hand reverser, 3 remotes, 3 pt, duls, rear weights inside tires, 1000 and 540 PTO

 

128. Glenn Wolfe – Esmond ND – 701-341-7961

– 1995 535 JD baler, shedded

– 30’ 230 JD rigid head w/ bat reel

 

129. Jim Berg- Starkweather ND – 701-351-3511

– 8’ Canola roller

– Degelman hyd. reel rock picker

 

130. Todd States – Cando ND – 701-230-8780

– 1999 34’ Carri-Lite 5th wheel camper, sleeps 6, everything works

Photo Gallery

Notes: